Tag Archives: Steampunk

Repurpose a Jar with a Grungy Steampunk Look

Posted on by

By Anna Escalada York

My teen is hard to please, but recently they expressed interest in having a small jar to use for candles. They really like a grungy steampunk vibe and their favorite color is green and so tried to personalize this for them.

Skill: Intermediate
Time: 1.5 hours (plus drying time)

Directions:

Step 1:

Add a dab of black Amplify! onto a brass metal gear and heat with a tool. Because I heated the Amplify!, it puffed out and made Amplify! gritty and puffy, which worked well for the jar’s gritty look.

Step 2:

Repeat step one with a second gear. Then press another gear into both a Potter’s Clay Memento ink pad as well as Perfect Plumeria VersaMagic ink pad to make the gear look like it had rusted over.

Step 3:

Die cut watercolor paper with gear dies. Then press each of the gears into Morning Mist VersaFine Clair ink. Heat emboss all three of them with silver embossing powder.

For the two top gears in the picture, press the gears back into the Morning Mist VersaFine Clair ink and then heat embossed them with clear embossing powder to create a darker or tarnished silver color on those two gears.

Step 4:

Paint a cleaned jar with gesso. Let it dry overnight. Then spray the jar with Bamboo Leaves Fireworks! Craft Spray and spin the jar to help move the spray around the jar. Repeat to color the whole bottom part of the jar and allow to dry.

Step 5:

Using a sponge dauber, add a thin layer of black Amplify! To the bottom part of the jar and then used the wet Amplify! to adhere silver embossing powder and then heated the powder to create a silver bottom to the jar.

Step 6:

Use a circular stencil and the same sponge dauber to add more black Amplify! to the center of the jar (on one side) and use a heat tool to dry.

Step 7:

Add rub on stickers next to the black circles. Glue the watercolor die cut gears over the stenciled black circles and then glue the two smaller metal gears over the top of them. Attach the largest gear by tying it onto the neck of the jar with silver thread. Splatter the jar with Northern Pine Memento Dual Tip Marker to finish the project.

Art Supplies

Imagine

• Amplify! – Black
• Fireworks! Craft Spray – Bamboo Leaves
• Memento ink – Potter’s Clay
• Memento marker – Northern Pine
• VersaFine Clair ink – Morning Mist
• VersaMagic ink – Perfect Plumeria

Other Products
• Golden – Gesso Semi-Opaque Acrylic Primer
• Tim Holtz and Idea-ology – Remnant Rubs
• Tim Holtz and Idea-ology – Sprocket Gears
• Sizzix – die set – Vault Industrial
• Circle stencil in my stash
• Clear Embossing Powder
• Silver Embossing Powder
• Silver thread
• Glue
• Watercolor paper

Let’s Make a Steampunk Father’s Day Card with Metallic Brilliance Inks

Posted on by

By Kathi Rerek

I’m continuing my experimentation with Metallic Brilliance Inks with this Father’s Day card using two of my favorite themes – cats and Steampunk!

Skill Level: Advanced
Time: 2.5 Hours

Directions:

Step 1:
Use a brayer to apply Starlite Silver Brilliance Ink to a 5” x 7” Gel Press. Place a piece of black mixed media paper onto the Gel Press. Smooth the back of the paper to transfer the in and pull a print.

Step 2:
Repeat Step 1 to enhance the coverage.

Step 3:
Clean the brayer, then use it to apply Starlite Black Brilliance ink to the Gel Press. Place the print back onto the Gel Press inked side down. Smooth the back of the paper, then pull the print. Heat set the inked paper, then clean the brayer and the Gel Press.

Step 4:
Place the inked black mixed media paper into the Foundry 3D Alterations Embossing Folder. Spritz the back of the paper with water. Close the folder and run it through a die-cut machine.

Step 5:
Use a Sponge Dauber to apply Cosmic Copper Brilliance Ink to the high points of the embossed paper. Heat set.

Steps 6A and 6B:
Use Fantastix to apply Turquoise Gem VersaMagic Ink randomly to the high points of the embossed paper (6A). VersaMagic Ink has a matte chalk finish which comes out when it’s heat embossed.

Use another Fantastix to Apply Mango Madness VersaMagic Ink randomly to the high points of the embossed paper (6B). Heat set the panel and set aside.

Step 7:
Use Tuxedo Black Memento Ink to stamp the cat from the Steampunk Pets Clear Stamp Set onto white cardstock.

Step 8:
Fussy-cut the image and use Copic markers to color it. Use a dark marker to edge the cut image. Set aside.

Step 9:
Use the largest die from the Sprightly Sprockets Shapeabilities Die Set to cut black mixed media cardstock two times. You will end up with two cogs and two circles.

Step 10:
Sponge Lightning Black Brilliance Ink over one of the cog die-cuts and one of the circles. Heat set both.

Step 11:
Use On-Point Glue to adhere the inked cog atop the other one.

Step 12:
Use a Sponge Dauber to apply Starlite Silver Brilliance ink to one of the circles from Step 9. Heat set.

Step 13:
Place the silver-inked circle into the Gears Alterations Folder and run it through a die-cut machine.

Step 14:
Use a Sponge Dauber to apply Cosmic Copper Brilliance Ink to the high points of the embossed circle. Heat set.

Steps 15A and 15B:
Use Fantastix to apply Turquoise Gem VersaMagic Ink randomly to the high points of the embossed paper (15A).

Use another Fantastix to Apply Mango Madness VersaMagic Ink randomly to the high points of the embossed paper (15B).

Step 16:
Use Tear It! Tape to adhere a slightly larger circle to the back of the stacked cog die-cuts.

Step 17:
Use a Sponge Dauber to apply Starlite Silver Brilliance Ink to a strip black mixed media paper. Sorry that there’s no photo. Use cog dies to cut the silver-inked black paper.

Step 18:
Use a C2 Copic marker to color a piece of white cardstock. Use magnets to secure the colored cardstock onto a stamping platform. Place the “Happy Father’s Day” sentiment stamp facedown on the colored cardstock. Ink the stamp with Turquoise Gem VersaMagic Ink and stamp. Repeat inking and stamping if necessary to attain a good impression. Remove the stamped cardstock from the stamping platform and heat set the ink.

Step 19:
Use a rectangle die to cut the sentiment. Use the matching nameplate die to cut the Lightning Black circle. Adhere the sentiment die-cut atop the nameplate die. Sorry that there’s no photo.

Step 20:
Use Tear-It! Tape to adhere the embossed circle and the Steampunk Cat onto the cog die-cut. Use the tape to adhere the sentiment as shown.

Step 21:
Use On Point Glue to adhere the gears, cogs, and screws to the sentiment die-cut.

Step 22:
Cut black cardstock to 10” x 7”. Score at 5” and fold to form a 5” x 7” card. Use Tear-It! Tape to adhere the image panel to the front of the card.

Finished Card

Crafts Supplies:

Imagine:

Other Supplies:

  • 140 lb. Black Mixed Media Paper by Strathmore
  • Raven Cardstock by Bazzill Basics
  • Solar White Classic Crest Cardstock by Neenah Designs
  • 5” x 7” Gel Press
  • 4” Brayer by Speedball
  • Foundry 3D Alterations Foundry Embossing Folder by Tim Holtz for Sizzix
  • Gears Alterations Embossing Folder by Tim Holtz for Sizzix
  • Sprightly Sprockets Shapeabilities Die Set
  • Nuts and Bolts Craftables Punch Die by Marianne Designs
  • Mini Gears Die Set by Memory Box
  • Premier Ink Blending Tools by Hunkydory Crafts
  • Premier Ink Blending Sponges by Hunkydory Crafts
  • Steampunk Pets Clear Stamp Set by Funky Fossil Designs
  • Classic Sentiments Clear Stamp Set by Hefty Doodle
  • Copic Markers
  • Spray Mister
  • Curved Craft Scissors by Fiskar’s
  • Heat Gun

Misti Stamping Platform by My Swe

Let’s Make a Steampunk Love Card

Posted on by

By Kathi Rerek

It’s Spring and love is in the air. Let’s combine the metallic look of Brilliance ink, the shimmer of Delicata Ink, pastel colors, and Steampunk imagery to create a Steampunk Love card.

Skill Level: Beginner to Intermediate

Time: 1 hour

Directions:

Step 1:

Use a stamping platform and Starlite Black Brilliance ink to stamp the Steampunk Heart twice – once onto a 6” x 8” piece of Mixed Media paper and a second time onto Repositionable Label paper.  Heat set the Mixed Media paper panel.

Smoosh London Fog Memento ink onto craft mat. Spritz it with Sheer Shimmer Sparkle Craft Spray.

Use a paint brush to color the center of the heart.

Step 2:

Fussy-cut the label paper heart and place it atop its counterpart on the image panel.

Step 3:

Use a Sponge Dauber to sponge Summer Sky Memento Ink horizontally across the image panel. Don’t worry about leaving white areas.

Use a Sponge Dauber to sponge Angel Pink Memento Ink onto the white areas of the image panel. You’ve now created a stormy sky!

Step 4:

Use a stamping platform to position the wing stamps facedown on the masked steampunk heart.

Ink with Starlite Black Brilliance Ink and stamp. Repeat if necessary to attain a clean image. Wipe remaining ink off of the stamp. Heat set the image panel.

Step 5:

Use a brayer to apply White Shimmer Delicata Ink to the wing stamps. Stamp.

Step 6:

Smoosh a 1” wide strip of white cardstock onto the Starlite Black Brilliance Pad. Smoosh a second 2” wide strip of white cardstock onto the White Shimmer Delicata Ink Pad.

Heat set both panels.

Step 7:

Apply Tear-It! Tape to the backs of both panels.

Use the “love” Shadow die to cut the White Shimmer Delicata inked cardstock.

Use the “love” die to cut the Starlite Black Brilliance inked cardstock.

Adhere the Starlite Black “love” die-cut to atop the White Shimmer Delicata “love” shadow die. Set aside.

Step 8:

Position the stamped image panel so that it’s horizontal on the stamping platform so that different cogs will be stamped along the edges of the image panel.

Step 9:

Position cog stamps from both Cogs Clear Stamp Set 2 and Cogs Clear Stamp Set 2, facedown on the left and right of what is now the top of the image panel. Ink the stamps with Starlite Black Brilliance Ink, stamp, and heat set. Remove and clean the cog stamps.

Position two different cog stamps from the same set facedown towards the center top edge of the image panel. Ink the stamps with Starlite Black Brilliance Ink, stamp, and heat set. Remove and clean the cog stamps.

Position a large cog stamp facedown in the center of the cogs. Ink the stamp with Starlite Black Brilliance ink, stamp, and set. Remove and clean the cog stamps.

Step 10:

Flip the image panel so that the clean edge is at the top of the platform. Repeat Step 9 to complete a second cog border.

Trim the image panel to 5.5” square and edge with Starlite Black Brilliance Ink. Heat set the entire panel.

Step 11:

Use White Shimmer Delicata Ink to sponge a piece of 5.75” square white cardstock. Heat set.

Step 12:

Cut a piece of 12×12 Avalanche cardstock to 6” x 12”, score, and fold to form a 6” square card.

Place a piece of scrap paper into the card. Use a Sponge Dauber to apply Starlite Brilliance Ink to the outer .25” edges of the card. Heat set.

Step 13:

Use Tear It! Tape to adhere the shimmery white 5.75” square to the card.

Adhere the image panel.

Adhere the sentiment to finish the card.

Art Supplies:

Imagine Crafts Supplies:

Other Supplies:

  • 140 lb. Mixed Media Cardstock by Strathmore
  • Solar White Classic Crest Cardstock by Neenah Papers
  • Avalanche White Cardstock by Bazzill Basics
  • Steampunk Heart Clear Polymer Stamp by Lavinia Stamps
  • Wings Large Clear Polymer Stamp Set by Lavinia Stamps
  • Cogs 2 Polymer Stamp Set by Lavinia Stamps
  • Cogs 3 Polymer Stamp Set by Lavinia Stamps
  • Tonic Stamping Platform
  • Heat Gun by EK Success