Hello Friends! Katy here with my latest video sharing a great way to use VersaFine Clair re-inkers on watercolor paper with felt pads and Isopropyl Alcohol, but I also share using an ink pad if you don’t have a re-inker. Video has all the details. Thanks for watching.
– Hello crafty friends! The special day to celebrate our mothers is here. We can celebrate them and show them love in many ways. But today, we are going to make a clean-and-simple handmade card for someone who has been a mother in our life.
Let’s get crafting!
Skill: Intermediate Time: 15-20 Minutes
Direction:
Step 1 Cut out a piece of watercolor cardstock into 4×6 inch and put it on the stamping tool. Stamp the mason jar bouquet image with VersaFine Onyx Black ink.
Step 2 Scribble some of the Memento Marker Summer Sky on the craft mat. Pick up ink with a wet waterbrush and start painting the water in the jar. Dry the paint in between to build up the layer of colors and shadow.
I used a waterbrush that can easily squish some water out to the brush, but you also can use any small round watercolor brush and clean water. Always have a piece of clean paper towel nearby to dab off too much water.
Step 3 Scribble some of the Memento Marker Bamboo Leaves on the craft mat. Pick up ink with a wet waterbrush and start painting the water in the jar. Dry the paint in between to build up the layer of colors and shadow.
Step 4 Scribble some of the Memento Marker Rose Bud on the craft mat. Pick up ink with a wet waterbrush and start painting the water in the jar. Dry the paint in between to build up the layer of colors and shadow.
Step 5 Scribble some of the Memento Marker Cantaloupe on the craft mat. Pick up ink with a wet waterbrush and start painting the water in the jar. Dry the paint in between to build up the layer of colors and shadow.
Step 6 Scribble some of the Memento Marker Paris Dusk on the craft mat. Pick up ink with a wet waterbrush and start painting the water in the jar. Dry the paint in between to build up the layer of colors and shadow.
Step 7 Scribble some of the Memento Marker Grape Jelly on the craft mat. Pick up ink with a wet waterbrush and start painting the water in the jar. Dry the paint in between to build up the layer of colors and shadow.
Step 8 Dry the whole watercolored image well with a craft heat gun. Fussy cut the image using the micro-tip scissors.
Step 9 Cut out a piece of white cardstock with one of the Stitched Tag dies. Stamp the sentiment on the tag with VersaFine Clair Nocturne ink. Dry the stamped sentiment with a craft heat gun.
Step 10 Add some of the VersaFine Clair Arctic ink on the front card base with finger sponge dauber. Dry the ink with a craft heat gun.
Step 11 Put some of the Tear It! Double-sided Tape on the back of the mason jar and add it to the tag. Tie up some of the white twine on the tag.
Step 12 Add the mason jar bouquet tag to the card with some of the On Point Glue.
Step 13 Embellish the card with some of the pearl gems.
This clean-and-simple Mother’s Day card may look simple yet it has layers but it is not bulky so it is perfect to be sent out to someone who has been a mother to you on this special time.
I hope you like this card and give this tutorial a try. Thanks so much for stopping by our blog today. Have a wonderful day!
Craft Supplies
Imagine Crafts:
Memento Marker (Cantaloupe, Bamboo Leaves, Summer Sky, Paris Dusk, Grape Jelly, Rose Bud)
It’s Ceal, here. Today I am sharing how to make this Clean and simple Mother’s Day card using the Brilliance for shimmer and VersaMagic dew drops.
Skill: Beginner to intermediate Time: 30 mins
Directions:
Gather your supplies. You will need a Mother’s Day stamp set or floral set as I have used here and a Mother’s Day sentiment. For inks I used a Brilliance Dew Drop and a VersaMagic Dew Drop
Step 1: Ink your stamp with a black ink
Step 2: Using the coordinating stencil and a blending brush or sponge dauber, ink blend a pearlescent pink on the flowers.
Step 3: Using the coordinating stencil and a sponge dauber or blending brus, ink blend green chalk ink on the leaves.
Step 4: Add embellishments of choice. I used some dew drops.
– Hi everyone! It’s Jessica here. Today I would like to share a card with a black and gold color combo. My card creations are typically full of bright colors; so I decided to change it up a bit by using a simpler color palette. Since there are only two colors on this card, I wanted to add various shimmer and glitter textures to create dimension. Let’s take a look!
Step 1: Trim Stardream Metallic 5 x 7 Onyx cardstock to 3 ¾’’ x 5’’. Paint golden stripes on the card panel with Sheer Shimmer Gold. One trick to avoid the gold shimmer from pooling on the edges is to swipe your paintbrush onto the craft mat. Another alternative is starting with a bigger piece of cardstock, then trimming the panel down to size.
Step 2: Dry the cardstock panel with a heat gun, and repeat steps 1-2 until you achieve bold, gold stripes. The Stardream Metallic Onyx cardstock has a subtle shimmer as well – it adds an elegant touch to the card base.
Step 3: Die cut roses and leaves with DCS Gold Glitter Heavyweight 12 x 12 cardstock. I find this glitter cardstock very easy to cut through. Some of the glitter cardstock I’ve used before uses adhesives to bind to the glitter, which takes a little more time to peel the die cut pieces off each other. This glitter cardstock, on the other hand, separates very easily after it’s been cut through.
Step 4: Next, adhere the die cuts to the strips background panel. I used On-Point Glue since the fine-tip nozzle is perfect for applying small amounts of glue. Then, use an acrylic block to press down on the die cut so that it completely adheres to the background.
Step 5: Finally, stamp the sentiment with Brilliance Galaxy Gold ink pad. This gold ink pad matches the Sheer Shimmer Gold so well! I added some black enamel dots to complete the card. I love the classic black and gold color combo, and I hope this card inspires you to try different kinds of gold shimmer on your project.
Hello Friends! Katy here with my latest video sharing a great way to use VersaFine Clair re-inkers on Craft Plastic with felt pads and Isopropyl Alcohol. Video has all the details. Thanks for watching.
Other Products Used Yupo Paper Simon Says Stamp Devine Peony Die Spellbinders Oceanside Cardstock Stampin up Subtle 3D folder The Greetery Mothers Day Stamp- To Mom with Love Stamp Set Gina K White Layering Cardstock 100 lb Accent Opaque Cardstock Felt Pads Isopropyl Alcohol
– I wanted to make a card that represents both my mom and myself. My mom’s favorite color is yellow, and I am all about the grunge and sparkle! Now I just need to be out of my craft room long enough for my kids to have to sneak in and make me a card….
Skill: Intermediate Time: 1.5 hours
Directions:
Step 1: Place a small piece of watercolor paper on some acetate and then spray both with Cottage Ivy Fireworks! Spray. Use a heat tool to dry the spray on the watercolor paper and then flip it over to watercolor smoosh the remaining Cottage Ivy Fireworks! Spray on the acetate and then dry the spray on the watercolor paper again. Repeat the watercolor smooshing once more and dry. Then die cut the watercolor paper with the stem die cut and set aside (not pictured).
Step 2: Stamp the flower’s petals, leaves and center stamps with Nocturne VersaFine Clair ink and heat emboss with clear embossing powder. While only one set of petals is pictured here, 12 petals (3 sets of all 4 petals) and both of the leaves and the center were all stamped in the same way
Step 3: Mix Electric Yellow Amplify! with a small amount of water to dilute the Amplify! Ink. Then use to paint the petals. Use a heat tool to dry and add texture. Die cut all of the petals.
Step 4: Stamp the faux stitching texture stamp onto the stem die cut with Nocturne VersaFine Clair Ink.
Step 5: Watercolor smoosh the stamped center of the flower with the leftover mix of water and Electric Yellow Amplify! Ink. Dry with a heat tool. Then spray the center with Rose Gold Sheer Shimmer Craft Spray and set aside to dry. Then die cut the center with the corresponding die.
Step 6: Glue collage paper onto a panel of kraft cardstock. After the glue dried, press the Champagne Delicata ink pad onto the collage paper to add sparkle and obscure some of the collage paper’s print.
Step 7: After die cutting the collaged panel, spray part of the panel with Cottage Ivy Fireworks! spray. Set aside to dry.
Off camera, die cut a piece of gold metallic cardstock with the next size up panel die.
Step 8: Spray some more of the Cottage Ivy Fireworks! spray onto another piece of acetate and then watercolor the leaves with the green color. After the spray dried, die cut with the corresponding dies from the die set.
Step 9: Stamp the sentiment on a scrap of watercolor paper with Nocturne VersaFine Clair ink. Then heat emboss with embossing powder.
Step 10: Assemble the card. Glue the stem onto the collage panel. Glue the leaves onto the panel. Glue the petals behind the center of the flower. (If desired, use some scraps or other small pieces of cardstock to glue behind the petals to help them stay together.) Then glue the flower petals and the center of the card onto the collaged panel. Then paint the edges of the panel with more of the Cottage Ivy Fireworks! spray. Then glue the sentiment on the lower left part of the panel. Add clear gems onto the panel.
After all of the glue has dried, glue the panel onto the gold metallic panel to add a matte layer. To finish the card, the whole thing was glued onto an A2-sized white card base.
Other • Idea-ology and Tim Holtz – collage paper – Archives • Scrappy Crafts – embellishment mix – Amethyst • Simon Says Stamp – die set – Love You Mama • Simon Says Stamp – die set – Squovals • Simon Says Stamp – stamp set – Love You Mama • Spellbinders – stamp and die cutting set – Sculpted Scripted Floral • Clear Embossing Powder • Gold metallic cardstock • Kraft cardstock • Heat tool • Glue • Watercolor paper
Imagine Blog 