Pyrography is the art of wood burning and it has a very distinctive look. This stamping technique has a very similar look. Be sure to use watercolor card or this technique will likely not work. You will also need a stamping platform, water mister and a water reactive dye ink like VersaMagic, and a non-water reactive pigment ink, like VersaFine Clair. Let’s get into it.
Using a Gel Press with VersaFine Clair inks is a great way to create a quick background.
Skill Level: Beginner to Intermediate
Time: 1 hour
Directions:
Step 1.
Use a 2” brayer to apply Paradise VersaFine Clair ink to the top part of a 4” round gel press. Clean the brayer, then use to apply Green Oasis VersaFine Clair Ink to the bottom of the gel press.
Press a 6” x 4.25” piece of mixed media paper onto the gel press and pull the print. I actually used a leftover panel from a previous gel print session that was not successful.
Step 2:
Mist the print with with 91% Isopropyl Alcohol.
Use Fantastix to apply Verdant VersaFine Clair Ink to even out the green area of the print and then apply Rain Forest VersaFine Clair Ink to add dimension.
Step 3:
Use paper towel to gently dab the sky and grassy areas of the print with Purell to further blend the ink.
Heat set.
Step 4:
Use magnets to secure the image panel to the base of a stamping platform.
Position the stretching cat stamp from the The Furieux/Caffeinated Cats Unmounted Stamp Set facedown so that its paws are on the grass.
Ink the stamp with Nocturne VersaFine Clair Ink and stamp. Re-ink and stamp again if needed. Remove the stamp and heat set the panel.
Step 5:
The left paws were stamped slightly above the grass, so I used Fantastix and Green Oasis VersaFine Clair Ink to add a tuft of grass under his floating paws and to add detail to the lawn.
Step 6:
Use a Sponge Dauber to apply Pearlescent Sky Blue Brilliance Ink around the image circle, leaving a bit of a halo effect around the circle.
Step 7:
Tape the image panel to the back of the Pawprint Stencil so that the smallest paw prints run horizontally across the top of the image panel.
Use Sponge Daubers to apply Pearlescent Sky Blue and Mediterranean Blue Brilliance Inks over the stencil onto the image panel.
Remove and clean the stencil, then repeat the steps above to stencil the small paw prints across the bottom of the image panel.
Lift the stencil and use the Sponge Dauber to edge the panel with Mediterranean Blue Brilliance Ink. Heat set the panel.
Step 8:
Use a Sponge Dauber to apply Pearlescent Sky Blue Brilliance Ink to a strip of white cardstock. Heat set.
Secure the cardstock strip to the base of a stamping platform. Position the “You talking’ to me?” sentiment from the Whatchamacallit Unmounted Stamp Set facedown on the strip.
Ink the stamp with Nocturne VersaFine Clair Ink and stamp. Heat set.
Use scissors or a die-cut to cut the sentiment and edge it with Mediterranean Blue Brilliance Ink. Heat set.
Step 9:
Cut a piece of white cardstock to 9” x 6.25”, score at 4.5”, and fold to form a 4.5” x 6.25” card.
Use a Sponge Dauber to apply Mediterranean Blue Brilliance Ink around the the edges of the card. Heat Set.
Step 10:
Use Tear It! Tape to secure the image panel to the card front.
Step 11:
After looking at the finished card,I decided that the card needed a larger sentiment up at the top left.
Secure the entire card with magnets to the base of a stamping platform. Position the “Hello” stamp from the Holiday Quotes. Unmounted Stamp Set facedown on the upper left. Use Nocturne VersaMark Ink to stamp the sentiment. Heat set.
Hello friends! This is Linh (or LV Handcrafted on all the socials). In today’s video I’m showing how to customize your ribbon to match your project perfectly! You can turn white ribbon to any color you need using your ink pads. Why buy different colors of ribbon when all you need is white!
Intro: Brilliance inks blend beautifully and the pearlescent ones create a beautiful shimmer that enhances magical scenes like this one.
Skill Level: Beginner to Intermediate
Time: 1 hour
Directions:
Step 1.
Use a Sponge Dauber to apply Mediterranean Blue Brilliance ink horizontally across the top of a 4” x 5.25” panel of white cardstock. Use a Sponge Dauber to apply Pearlescent Sky Blue Brilliance ink below the darker blue. Use both daubers to create a blended shimmery sky.
Use a Sponge Dauber to apply the Pearlescent Coral Brilliance ink from the Aurora 3-Color Brilliance Ink Pad. Sorry that there’s no photo!
Step 2:
Tape the image panel to the back of the Clouds Stencil.
Using a Sponge Dauber, apply Moonlight White Brilliance ink over the stencil onto the image panel.
Remove the stencil and heat set the ink.
Step 3:
Use magnets to secure the ink-sponged panel approximately .5” from the right edge and 1” from the bottom of the stamping platform.
Position the Cityscape Reflections Stamp facedown along the bottom of the stamping platform.
Ink the stamp with Nocturne VersaFine Clair Ink and stamp. Re-ink and stamp again if needed. Remove the stamp and heat set the panel.
Step 4:
Move the image panel so that it’s flush the right and bottom edges of the stamping platform. Secure with magnets.
Position the Silhouette Lady with Umbrella Stamp facedown along the right edge above the cityscape.
Ink the stamp with Nocturne VersaFine Clair Ink and stamp. Re-ink and stamp again if needed. Remove the stamp and heat set the panel.
Step 5:
Trim the image panel to 3 7/8” x 5 1/8”.
Use a Sponge Dauber and Mediterranean Blue Brilliance Ink to edge the image panel.
Step 6:
Cut a piece of Raven cardstock to 4” x 5.25”.
Use Tear It! Tape to adhere the image panel to the black cardstock.
Step 7:
Create an A2 Card from White cardstock.
Use a Sponge Dauber to apply Mediterranean Blue Brilliance Ink to the outer .5” of the folded card. Heat set.
Step 8:
Use Tear It! Tape to adhere the image panel to the card.
– Hello friends! This is Linh (or LV Handcrafted on all the socials). In today’s video I’m showing how to use your Memento Dew Drop inks to create a perfectly coordinated card. First, I created a background using Love Letter and Teal Zeal to create a plaid. I made a custom ink color by over-stamping multiple times with both colors! I used Teal Zeal to create a coordinating solid color cardstock by just swiping it across white cardstock. Finally, I smooshed Love Letter and Teal Zeal and used a waterbrush pen to color in my stamped image. For the skin, I used Peanut Brittle and for the hair I used Espresso Truffle.
How familiar are you with Kaleidacolor inkpads and Mboss Embossing Powder? Let’s take a look at one of the Kaleidacolor pads I have had for many years and see how it does on the gel plate. Then we’ll play a bit and see how 4 different Mboss Embossing powders impact the same basic Gelli printed background.
Imagine Blog 