Hello crafty friends! It’s Ceal, here. Today I am sharing how to create a simple but elegant wedding card.
Skill Level: Intermediate to Advanced Time: 45 Minutes
Directions:
Gather your supplies. You will need a stamp set with a floral image and wedding sentiments. An A2 sized die and some wedding themed dies, a stamp positioner and a shimmer ink pad.
Step 1: Using a Misti or stamp positioner and a grip mat place the cardstock panel in the center. Place the floral stamp on the corner of the panel and ink with shimmer ink (I used Delicata Silvery Shimmer) stamp, you may have to stamp more than once to get a clean image. Turn your paper, no need to move the stamp thanks to the Misti and ink it up and stamp again on the other corner. This ink is a pigment ink therefore it takes a little longer to dry, you can speed that up by heat setting it.
Step 2: Cut the panel with the die keeping both pieces. Also cut out the wedding themed dies.
Step 3: Place the card base in the corner of the Misti and then glue the borer of your die cut pieces down first. I always place it in the corner of the Misti, this helps me line it up.
Step 4: Add the main die cut piece using foam tape to give it dimension. Tip: after adding the foam adhesive to the panel also add some liquid glue, this allows you to move the panel to get it in place.
Stamp the greeting on a strip of paper and cut it out. Add all of the elements to the card.
Hello Friends! Tracy here and today I am excited to share this fun and quirky little Father’s Day card created with a family funny bone element!
In today’s video tutorial I am sharing how to get dimensional effects out of your lettering stencils and how to create background noise using our #8 Stippling Brush and our Brushstix along with some of our most popular inks!
I wanted to make my Father-In-Law’s Father’s Day Card with a variety of browns and a pop of another color. So I picked Neptune VersaColor ink for a pop of color on the monochromatic background.
Skill: Intermediate Time: 1.5 hours
Directions:
Step 1: Die cut a piece of watercolor paper with the second-largest die in an A2-sized die set. Press a Sand Dune VersaFine Clair Ink onto the watercolor panel.
Step 2: Spray Sparkle Sheer Shimmer Craft Spray onto an embossing folder and then emboss the Sand Dune colored panel by running it through a die cutting machine between the two sides of the embossing folder. Allow the panel to dry.
Step 3: Glide a Neptune VersaColor ink across the panel. The raised (embossed) parts of the panel will be colored with the Neptune ink, and the debossed parts of the panel will stay the Sand Dune color. Then run the Neptune VersaColor pad across the edges of the panel to color the border of the panel as well.
Step 4: Stamp the card’s sentiments (both the larger “happy” and the “Father’s Day” subsentiment) on another piece of watercolor paper with Dark Brown Shimmer Delicata ink and then heat emboss both of them with clear embossing powder. Set this aside as well.
Step 5: Press the Dark Brown Shimmer Delicata Ink Pad onto the edges of a watercolor panel until achieving a thick, dark brown border. This panel will become the matte layer of the card.
Step 6: Using the largest die from the A2-sized die set, die cut the dark brown panel . Glue the two panels together and set aside.
Step 7: Trim the sub-sentiment with a paper trimmer. Press the edges of the sentiment strip into the Sand Dune VersaFine Clair ink pad and set the sentiment strip aside to dry.
Steps 8 and 9: Press the Dark Brown Shimmer Delicata ink pad onto another small piece of watercolor paper.
Not pictured: Die cut the larger “Happy” sentiment from step 4 with the corresponding die. Then die cut a piece of the Dark Brown Shimmer colored watercolor paper with the same die to create two layers of the die cut.
Step 10: Glue the two die cut sentiment layers together, with the dark brown layer peeking out on the left side of the stamped (top) layer. Using some of the remaining dark brown watercolor paper from the last step, cut a thin strip to glue on the bottom of the sub sentiment. Glue the thin brown strip behind the sub sentiment as well as some scrap cardstock to make the sub sentiment three layers deep for strength and dimension. Set them both aside.
Step 11: Press the Dark Brown Shimmer Delicata ink pad onto a piece of acetate packaging and mix with water. Splatter the panels and the sub sentiment with the dark brown splatter. Paint the large “happy” sentiment letters with some of the remaining brown-tinted water. Set it all aside to dry.
Step 12: Press a Neptune VersaColor ink pad onto another small piece of watercolor paper. Set it asde for the ink to dry.
Step 13: Die cut the Neptune-colored watercolor paper with a leaf die.
Step 14: Assemble the card. If desired, add some twine and attach to the back of the card panels with washi tape and then add foam tape on the back so the card base will lay flat when attached to the kraft A2-sized card base. Then glue some brass-colored sequins near the sentiment to finish the card.
Hello friends! It’s Ceal here. Today I am sharing ho I made this legendary Father’s Day card.
Skill Level: Intermediate Time: 45 minutes
Directions:
Gather your supplies. You will need a stencil, Father’s Day themed stamp set, stencil, coordinating dies, Misti or other stamp positioner, three colors of blue ink, a green and brown ink.
Step 1: Place stencil on grip mat inside the Misti. Blend a light color of blue ink in the top third of the stencil.
Step 2: Blend a medium color of blue ink in the middle third of the stencil.
Step 3: Blend a dark color of blue on the bottom third of the stencil.
Step 4: Using green and brown ink, stamp the trees inside the stencil.
Step 5: Stamp the sasquatch and sentiments in black ink. Cut out the sasquatch with the coordinating die and the sentiments with a trimmer.
Step 6: Adhere the panel to a card base and pop up the sasquatch using foam tape and then add sentiments.
Hi everyone! It’s Jessica here. Today’s project is inspired by the Pantone color of this year – Mocha Mousse. It is such a warm, rich shade that is perfect for a coffee card! I decided to compare the different brown and earthy tones in the VersaFine Clair ink line as well. There are many options to choose from, and each is special on its own.
Step 1: Today I will be using an acrylic stamp set from iCrafter. It is called Latte Coffee and has several sets of coffee cup images. Since the image outlines are superfine, I chose VersaFine Clair inks to stamp with to ensure crisp, clean images. I typically stamp the outline images with Nocturne (the black color of this ink line). However, when I was experimenting with the colors, I found that Fallen Leaves is a great alternative. The dark brown color adds more warmth than black and complements the other earthy tones well. I love VersaFine Clair inks and use them very regularly, but Fallen Leaves was probably the one I reach for the least. I think I will start using it to stamp outline images from now on!
Step 2: I used Sand Dune to stamp the first latte art image. This is one of the newer VersaFine Clair colors. I am really happy that they added a lighter earth shade to this collection.
Step 3: For the second latte art stamp, I used Pinecone. This is also a rich, dark brown color. It is just a bit lighter than Fallen Leaves.
Step 4: I used Acorn for the bottom coffee image with the swirl. It is a great middle-tone that completes the brown color gradient.
Step 5: Today’s card is simple and beginner-friendly with easy layered stamping. However, you could also add a little flair by embossing the front panel of the card base. Embossing folders are easy to use and add such a great wow factor to your project. The one I am using today is called Brick & Mortar. I think it reminds me of the walls of a cute coffee shop!
Step 6: Finally, I stamped this super cute sentiment with Sand Dune, and that completes today’s coffee card!
As a mom of a teen and tween, I wanted to make a snarky piece of home decor that would make them smile. So I decided to make a pretty piece of art that I was going to put up in our dining room.
Skill: Intermediate Time: 3 hours
Directions:
Step 1: Paint a thin layer of white gesso onto a 5” by 7” medium density fiberboard (MDF) panel.
Step 2: Glue a ripped piece of text-based patterned paper onto the left side of the panel, making sure that the paper doesn’t go off the side of the fiberboard panel. Then paint over the whole panel again with more white gesso.
Step 3: Stamp a long, floral image onto white watercolor paper with Nocturne VersaFine Clair ink and then heat emboss it with clear embossing powder. Then color the main branch and ribs of the leaves with Northern Pine Memento Dual Marker and the flowers with Lady Bug Memento Dual Marker.
Step 4: Die cut the long, floral image. Spray Cottage Ivy Fireworks! Shimmery Craft Spray onto a piece of scrap acetate packaging and watercolor paint the leaves and edges of the floral image green, making sure to blend the darker marker color with the lighter spray. Set aside to dry.
Step 5: Add texture to the fireboard panel. Use some of the remaining Cottage Ivy Fireworks! Shimmery Craft Spray mixed with more white gesso to create a light green paint. Paint the center part of the fireboard panel with the light green paint. Then watercolor smoosh more of the Cottage Ivy Fireworks! Shimmery Craft Spray (without any gesso) onto the panel to add texture. After the spray and paint have dried, press Celestial Copper Delicata Ink through a circular stencil overlapping the patterned paper. Then press the Celestial Copper Delicata Ink pad around the edges of the panel.
Step 6: Stamp a large butterfly on another piece of watercolor paper using Nocturne VersaFine Clair ink and heat emboss with more clear embossing powder. Then spray Lilac Posies Fireworks! Shimmery Craft Spray onto more scrap acetate packaging and watercolor spray the butterfly. Spray the whole thing with Sparkle Sheer Shimmer Craft Spray, which forces the Lilac Posies spray to diffuse outside of the butterfly’s outline. After the spray dried, die cut the butterfly with the corresponding die. Finally, paint the butterfly a second time with more of the Lilac Posies Fireworks! Shimmery Craft Spray to deepen the color. Set aside to dry.
Step 7: Return to the background panel. Attach two types of washi tape to the left side of the panel–small pieces of black and white dotted washi tape and a white piece of washi tape that comes die cut in a lacy geometric pattern.
Then stamp a sentiment on the lower right part of the panel with more Nocturne VersaFine Clair in and heat emboss with more clear embossing powder.
Step 8: Using a small musical note stamp, partially stamp the panel multiple times with Spuce VersaFine Clair ink.
Step 9: Stamp the smaller butterfly twice with more Nocturne VersaFine Clair ink and heat emboss them with clear embossing powder. Then color them in with Lulu Lavender and Tangelo Memento Dual Markers (orange butterfly) and with Tangelo and Grape Jelly Memento Dual Markers (purple butterfly). Then spray both butterflies with Sparkle Sheer Shimmer Craft Spray. Once the spray had dried, die cut the butterflies with their corresponding die.
(In the final piece, only the orange butterfly colored with Tangelo and Lulu Lavender Memento Dual Markers was used.)
Step 10: Stamp part of the mountain outline stamp on the lower right part of the panel with more Nocturne VersaFine Clair ink and heat emboss with clear embossing powder. Then stamp part of the sun stamp with Summertime VersaFine Clair Ink.
Step 11: Spray around the sun with Cantaloupe Fireworks! Shimmery Craft Spray. Use a paintbrush or your finger to move dots of the Cantaloupe spray to make the spray less uniform and more organic.
Step 12: Glue the flowers and small butterfly onto the panel. Attach the larger butterfly to the panel with foam tape. If desired, the outer tips of the top wings can be given additional dimension with two layers of foam tape, forcing them to curve.
Other Altenew – die set – All Things Orange Altenew – stamp set – All Things Orange Altenew – foam tape – Instant Dimension Foam Tape Altenew – washi tape – Many Dots Art Alternatives – MDF Panel (5” x 7”) Golden – Gesso Semi-Opaque Acrylic Primer Ink Road Stamps – stamp set – Roadies 8 (sentiment stamp) Visible Image – die set – Antisocial Butterfly Visible Image – stamp set – Antisocial Butterfly Circular stencil Die cut washi tape Watercolor paper Vellum Pencil Paintbrush Die cutting machine Paint brush Scissors Glue Text-based patterned paper Clear embossing powder
Imagine Blog 