Tag Archives: inkpad

Trick or Treat… Let’s Made a Halloween Card

Posted on by

By Anna Escalada York

I’ve been really enjoying Halloween cards lately and it was so fun to use a bunch of sprays to make this one.

Skill: Intermediate
Time: 1.5 hours

Directions:

Step 1:
Die cut all of the pieces for the die cut pumpkin out of watercolor paper and then spray the two bottom pieces with Rich Cocoa Fireworks! Craft Spray (bottom-most layer) and Tangelo! Craft Spray (second-largest layer) and let dry.

Step 2:
Spray the other three die cut pieces: Dandelion Fireworks! Craft Spray on the middle die cut, Gold Sheer Shimmer Craft Spray on the upper part of the pumpkin’s body, and Bamboo Leaves Fireworks! Craft Spray for the pumpkin stem. Allow all the layers to dry.

Step 3:
Glue the layers of the pumpkin together and then ink blend the edges of the pumpkin with Nocturne VersaFine Clair ink and a sponge dauber.

Step 4:
Ink blend the pumpkin stem die cut with Nocturne VersaFine Clair ink and a sponge dauber.

Step 5:
Spray the whole pumpkin die cut with more Gold Sheer Shimmer Craft Spray and set aside to dry.

Step 6:
Spray the Dandelion and Tangelo Fireworks! Craft Spray onto a piece of acetate packaging and use it to watercolor smoosh a panel of watercolor paper. After the spray dries, die cut it with an A2-sized die cut.

Step 7:
Splatter Rich Cocoa Fireworks! Craft Spray onto the background panel with the stick from the bottle’s spray nozzle. Then use a Nocturne VersaFine Clair ink to partially stamp the panel as well as ink blend the edges. Heat emboss the cobwebs and ink blended edges with clear embossing powder

Step 8:
Press the Nocturne VersaFine Clair ink pad onto a small piece of watercolor paper to color it black.

Step 9:
Die cut the now black piece of watercolor paper to create the sentiment and spray it with Gold Sheer Shimmer Craft Spray.

Step 10:
Die cut a piece of vellum with the sentiment’s shadow and glue both layers together.

Step 11:
Assemble the card. Glue the pumpkin’s stem and the rest of the pumpkin together and glue it approximately in the center of the panel. Glue the sentiment on the right side of the pumpkin. Then add orange and yellow sequins onto the card. To finish the card, glue the whole card panel onto an orange A2-sized card base.

Art Supplies

Imagine

Fireworks! Craft Sprays- Bamboo Leaves, Dandelion, Rich Cocoa and Tangelo
Sheer Shimmer Craft Spray – Gold
VersaFine Clair ink – Nocturne
Sponge Dauber

Other

Pink and Main – die set – Notched Corners
Pretty Pink Posh – die set – Fringe Pumpkin
Simon Says Stamp – die cut – Trick or Treat 2
Simon Says Stamp – sequin mix – Autumn Leaves (retired)
Tailored Expressions – stamp – Spiderweb Cling & Clear Combo
A2-sized orange card base
Clear Embossing Powder
Watercolor paper
Die cutting machine Scissors
Glue

Create a Mini Halloween Bat Treat Box 

Posted on by

By Jessica Lin

Skill: Beginner
Time: 20 minutes

– Hi everyone! It’s Jessica here. Halloween is right around the corner and today I have a really quick & easy treat box idea for you. If you are interested in making mini treat boxes and dressing them up for Halloween, Christmas, or Easter, just keep reading!

Step 1:
Die cut a piece of Mint Macaron cardstock with Design a Treatbox die from Stampin’ Up. Fold along the score lines to create a mini treat box.

Step 2:
Die cut a piece of black cardstock with the bat wing die from the same set. Then spritzed it with a generous layer of Sheer Shimmer Craft Spray in Frost. The shimmer spray really adds a whimsical touch to the bat wings! You can compare it with the die cut in the back without the Sheer Shimmer Spray. Doesn’t it look so different?

Step 3:
Then I added a smiley face to the tab of the treat box with irRESISTible Pico Embellisher. The fine-tip nozzle was so easy to use to create fine details.

Step 4:
Die cut the box labels with mint patterned paper and white cardstock. The “trick or treat” sentiment is from Mama Elephant’s Meowlloween Extras set. I stamped it with Brilliance Starlite Black ink pad.

Step 5:
Since this is a mini treat box (holds 2 Hershey kisses), no tape or glue is required for the box assembly. Simply fold along the crease lines and hold it together with the flaps’ openings. This no-glue project is ideal for mass production and you could create many party favors in a short time!

Once the box is assembled, adhere the label dies to the front and slide the bat wings die between the top tabs. You could also create Christmas or Easter treat boxes with the other dies in this set.

Imagine Supplies:

Other Supplies:

  • Stampin’ Up! – Dies – Design a Treatbox
  • Stampin’ Up! – Tool – Mini Cut & Emboss Machine
  • Mama Elephant – Stamps – Meowlloween Extras

Stamping on Fabric: Muslin Bags with Ink and Stencils

Posted on by

By Helen Gullett

Hello crafty friends! Today’s projects are about how you can personalize any muslin bags or canvas bags by adding patterns, words, or anything you can think of with Fabrico Markers, Memento Luxe ink pads, and stencils. It will be fun projects to make for any occasion gift ideas or even for yourself to use. So, let’s make some together!

Skill: Easy
Time: 15-20 minutes

Direction:

Step 1
If your muslin or canvas bag has some wrinkles or folded lines on it, you can iron it before stenciling on it. I ironed my mini muslin bags that I used on these projects today.
Cut out a piece of a thick cardboard or cardstock as an insert mat to put inside the bag to prevent the ink from bleeding through the other side of the bag.
Tape the stencil on the bag with masking tape or washi tape.
Use Fabrico Markers to color through the leafy stencil. To do the ink blending, start with dark color first, then medium color, then lighter color after to blend the color together.
The ink from the bag will transfer to the marker, but do not worry because you can clean the other ink color from the marker tip by scribbling it off on a piece of paper.

Remove the stencil from the bag.

Step 2
Repeat the same step to add more pattern or word to the bag.
On this one, I decided to add the word Be Still on the bag using stencil and Fabrico Marker.
Remove the stencil and set aside for the ink to dry, or iron the bag to dry the inks permanently and quickly.
I love how versatile these Fabrico Markers are when it comes to coloring solid images. The colors blend well together.
The second technique to personalize a muslin bag you can try is by adding ink directly to the bag with ink pads, sponge daubers, and stencil.

Step 3
Add the insert mat inside the mini muslin bag.
Tape the stencil on the mini muslin bag with masking tape or washi tape.
Using a sponge dauber,  pick up the ink from the Memento Luxe Rich Cocoa ink pad by tapping on the ink pad a couple times.
Dab the ink on the sponge dauber on the stencil firmly through the stencil to make sure the ink transfers to the bag.
Repeat the steps until the bag is covered with the pattern.

Step 4
Remove the stencil from the bag.
Iron the bag to dry the ink permanently on the bag.

I love how they look after removing the stencils off the bags. I personally like both techniques, how about you? Which technique do you prefer better to do to personalize your own bags?

Hopefully you also will have fun personalizing your own bags by trying one of both techniques. Thank you for stopping by our blog today. Have a wonderful day!

Craft Supplies

Imagine Crafts:

Others:

Learn How to Make a Fun Treat Bag!

Posted on by

By Tracy Fear

Hello Friends! Tracy here and today I am excited to share with you  how to make a fun and easy little gift/treat bag!

Tracy

Skill: Intermediate
Time: 30 Minutes

Art Supplies

Stamping Platform
6×6 Pattern Paper
Plain Paper for Stamping
Scissors
Scoring Board
Hole Punch
Coloring Medium of your choice!

Imagine Products
VersaFine Clair in Twilight
Stazon Ink in Spiced Chai

Other Products Used
6×6 Pattern Paper, double sided of your choice
120lb paper in white and Kraft
Paper to stamp on
Coloring medium of your choice
Misti tool
PVA Adhesive

ALTERNATIVE PRODUCTS THAT CAN BE USED TO RECREATE SOMETHING SIMILAR

Any Inks any combination of background stamps and feature stamps

To learn how to create your own little treat bags click here!

Purrfectly Bewitched Halloween Card

Posted on by

By Ceal Pritchett

Hey there crafty friends! It’s Ceal, here. Today I am sharing a Halloween card with you.

Skill Level: Intermediate
Time: 30 Minutes

Directions:

Gather your supplies. You will need a Halloween themed stamp set, a stencil, white and black embossing powder, some markers if you have a line art image and three Halloween colors of ink.

Step 1:
Ink Blend a purple ink (VersaFine Clair Purple Delight used) on a third of the panel.

Step 2:
Ink Blend an orange (VersaFine Clair Summertime used) ink over the second third of the panel.

Step 3:
Ink Blend a yellow (VersaFine Clair Cheerful used) ink over the bottom third of the panel.

Step 4:
Place a stencil over the blended panel and add black (VersaFine Clair Nocturne used) ink over the stencil.

Step 5:
Stamp a spider web in the corner using black ink and then emboss with black powder.

Step 6:
Stamp, color and cut out the image and add to the front of the card.

Supplies:

Imagine Products

VersaFine Clair – Nocturne, Summertime, Cheerful and Purple Delight
Memento Markers – Angel Pink, Pear Tart, Sweet Plum and Gray Flannel

Other Products
Meowgical stamp set – The Rabbit Hole Designs
Meowgical Coordinating dies – The Rabbit Hole Designs
Stencil – Tim Holtz

Let’s Make a Repurposed Tea Tin Box

Posted on by

By Anna Escalada York

I’ve had a small metal tea box that I’ve wanted to repurpose into a mixed media piece for a while, so I took some time on a rainy day to make it happen.

Skill: Advanced
Time: 1 hour active time, 6+ hours (drying between layers)

Directions:

Step 1:

After applying two coats of gesso around all four sides of a tea tin, spray the top of the tin with Cherry Blossom Walnut Ink Antiquing Solution and allow it to drip down the sides of the tin. Set aside to dry.

Step 2:

Spray all four sides of the tin with Lulu Lavender Fireworks! Craft Spray and allow to dry.

Step 3:

While the tin was drying, die cut four leaf clusters out of watercolor paper. Then randomly add Paris Dusk Fireworks! Craft Spray to the centers of each leaf with the stick of the spray nozzle and color the outsides of the leaves with Elderberry Memento Dual Marker.

Step 4:

Spray each of the 4 leaf clusters with Lulu Lavender Fireworks! Craft Spray and allow to dry.

Step 5:

Partially stamp each of the four sides of the tin with Night Sky VersaMagic ink on a background stamp. (I used an old woodblock typewriter stamp.) Then press the ink pad along the top edge of the tin and the raised rib as well. Heat emboss the top rim of ink with clear embossing powder.

Step 6:

Ink blend Lilac VersaColor ink through a stencil on all four sides of the tin using a sponge dauber. (Not pictured was splattering more of the Paris Dusk Fireworks! Craft Spray onto each of the four sides as well.) Then allow everything to dry.

Step 7:

Glue two of the leaf cluster dies (one on top of the other) along the right edge of two of the sides of the tin.

Not pictured was the step after this where I decided to use my sponge daubers to ink blend some more of the Night Sky VersaMagic ink along some of the edges of the leaves while they were glued down, nor using my Gold Sheer Shimmer Stix Dauber Top to add some gold to the leaves as well.

Splatter the tin with more Paris Dusk Fireworks! Craft Spray. Allow it to dry. Then glue dark blue gems around the leaf clusters to finish the box on the two slides with leaves.

Art Supplies

Imagine

Fireworks! – Lulu Lavender and Paris Dusk
Memento Dual Marker – Elderberry
Sheer Shimmer Stix Dauber Top – Gold
VersaColor ink – Lilac
VersaMagic ink – Night Sky
Walnut Ink Antiquing Solution – Cherry Blossom
Sponge Daubers

Other

AALL & Create – stencil – Lotza Starz 6″x6″ stencil
Golden – Gesso Semi-Opaque Acrylic Primer
Scrappy Tails Crafts – embellishment mix
Simon Says Stamp – die cut – Autumn Leaf Branch
Old typewriter woodblock stamp in my stash
Clear Embossing Powder
Watercolor paper
Foam paint brush (for the gesso)
Die cutting machine
Glue