Tag Archives: tsukineko

Hanukkah Card with Vibrant Blues

Posted on by

By Anna Escalada York

Since we are deep in holiday card making seasons, I am sharing a Hanukkah card featuring a lot of different blues.

Skill: Intermediate
Time: 2 hours

Directions:

Step 1:
Watercolor smoosh Danube Blue and Grape Jelly Memento Dual Markers as well as Turquoise Gem VersaMagic Chalk Ink mixed with water on a piece of scrap acetate packaging onto a watercolor panel. Allow the panel to dry.

Step 2:
Arrange a variety of six-sided stars onto one side of the watercolor panel in a stamp positioner. Stamp the stars onto the panel with Bali Blue VersaFine Clair Pigment Ink and then heat emboss with clear Mboss powder. Flip the panel and repeat the process. Move any of the stars around on the stamp positioner to fill in any holes on the panel.

Step 3:
Watercolor smoosh the panel again, this time with Teal Zeal Memento Dye ink mixed with Sparkle Sheer Shimmer Craft Spray on the acetate packaging.

Step 4:
Color in the six-sided stars with Summer Sky and Lulu Lavender Memento Dual Markers.

Step 5:
Ink blend the edges of the panel Neptune VersaColor ink with a sponge dauber. Run the edges of the panel through the Neptune VersaColor ink pad and then heat emboss with more clear Mboss powder.

Step 6:
Stamp the menorah and sentiment on watercolor paper with Medieval Blue VersaFine Clair ink. Heat emboss with more clear Mboss powder. Then die cut with the corresponding dies from the matching die set.

If desired, die cut some scraps of cardstock with the two dies two more times (to create two layers to glue behind the menorah and two layers to glue behind the sentiment) for strength and dimension.

Step 7:
Watercolor the flames with Cantaloupe Fireworks! Shimmery Craft Spray. Then use some of the remaining Teal Zeal Memento dye ink mixed with Sparkle Sheer Shimmer Craft Spray (from step 3) to watercolor the tops of each candle. Add some of the Sparkle Sheer Shimmer Craft Spray (by itself) to the bottom of each candle.

If desired, watercolor the base of the menorah with more of the same Tael Zeal Memento dye ink mixed with Sparkle Sheer Shimmer Craft Spray.

Set the die cut aside to dry.

Steps 8 and 9:
Add Neptune VersaColor ink directly to another panel of watercolor paper that is slightly larger than the first panel. You may need to do this a few times to get the coverage you want. Allow the panel to dry.

(And this is where my camera crashed after taking pictures so I can’t share the next few steps.) Die cut the panel with a die slightly larger than the stamped panel.

Then glue the two panels together, glue the menorah onto the center of the top panel and the sentiment a little lower and right of the sentiment. Then glue blue gems around the menorah.

Steps 10:
Glue the panel onto an A2-sized white card base.

Art Supplies

Imagine

• Fireworks! Shimmery Craft Spray – Cantaloupe
• Mboss – Clear
• Memento Dye Ink – Teal Zeal
• Memento Dual Marker – Danube Blue, Grape Jelly, Lulu Lavender, Summer Sky
• Sheer Shimmer Craft Spray – Sparkle
• VersaColor Ink – Neptune
• VersaFine Clair ink – Bali Blue, Medieval Blue
• VersaMagic Chalk Ink – Turquoise Gem
• Sponge Dauber

Other
• Crafty Meraki – embellishments – Meraki Sparkle Prismatic Blue
• Pink & Main – die set – Notched Corners
• Simon Says Stamp – die set – Light the Menorah
• Simon Says Stamp – stamp set – Light the Menorah
• Watercolor paper
• Die cutting machine
• Paint brush
• Paper trimmer
• Scissors
• Glue

Quick & Easy Christmas Cards using Ornament Punches

Posted on by

By Jessica Lin

Skill Level: Beginner
Time: 30 minutes

Hi everyone, it’s Jessica here. Quick & easy cards are so fun to make, and they are perfect for holiday mass production too! I made several versions today using some punches, and I hope you’ll enjoy this quick tutorial.

Step 1:
Use Stampin’ Up!’s Gleaming Ornaments punches with patterned paper to create the christmas ornaments. Each ornament needs two pieces; one unscored and one scored in the middle.

Step 2:
Apply On Point Glue onto the folded crease (backside of the patterned paper) and adhere to the unscored punch piece. Hold in place for 20-30 seconds while the glue dries.

Step 3:
Prepare 3 pieces of cardstock and adhere them together with Tear It Tape. The largest size measures 2 3/4‘’ x 4 1/4‘’, the medium size measures 2 5/8‘’ x 4 1/8‘’, and the small size 2 1/2‘’ x 4’’.

Step 4:
Attach a piece of gold thread to the back of the ornament with Tear It Tape, and adhere to the layered background. Attach the other end of the gold thread to the back of the green cardstock layer.

Step 5:
Adhere tiny bows to the top of the ornaments with glue dots.

Step 6:
Stamp the sentiment on black cardstock using StazOn Pigment ink. Adhere both the sentiment strip and the layered panel to the card base with Tear It Tape.

Step 7:
For the second version of the christmas card, I used the negative pieces from the punches and layered red, embossed cardstock underneath. Generously apply the Sheer Shimmer Stix in sparkle to add additional shimmer.

Step 8:
Adhered the patterned paper pieces onto the card base and stamp the sentiment using VersaFine Clair Nocturne ink. For a finishing touch, splatter on gold acrylic paint with a paint brush.

Imagine Supplies:

Other Supplies:

  • Stampin’ Up! – Punch – Gleaming Ornaments Punch Pack
  • Stampin’ Up! – Stamps – A Wish for Everything
  • We R – Tool – Precision Press
  • Gold thread
  • Thin red ribbon
  • Glue Dot
  • White, green, red, black cardstock

Faux Stained Glass Christmas Card

Posted on by

By Ceil Pritchett

Hello Crafty Friends!
It’s Ceal, here. Today I am sharing how I made this faux stained-glass Christmas Card.

Skill Level: Beginner
Time: 30 Minutes

Directions:


Gather your supplies. You will three inks, Pink, Yellow and Blue. A blending tool, a silhouette die along with black, white and gold cardstock.

Step 1:
Cut the nativity die out of black cardstock, the backer out of white and the star out of the gold cardstock.

Step 2:
On the backer using a sponge or other blending tool, blend the blue around the outer edge of the panel and the pink and yellow inside the blue.

Step 3:
Line up the nativity over the backer and adhere it down with On Point glue. As you can see in the photo above, I use the corner of the MISTI to help me line things up.

Step 4:
Add the window to the card base.

Supplies:

Imagine Products:
• VersaFine Clair – Charming Pink, Cheerful and Warm Breeze
• On Point Glue
• Sponge Daubers

Other Products:
Misti 2.0 – My Sweet Petunia
Nativity Die – Stampendous
White Cardstock – CutCardStock
Black Cardstock – Hero Arts
Gold foil cardstock – Erin Lee Creative

Make a Fun Christmas Cat Card

Posted on by

By Alison Heikkila

Hello! Alison Heikkila here. It’s time for my latest video for Imagine and I thought it would be fun to show a variety of simple techniques to make a fun cat-themed Christmas card. Plus, we’ll be using Memento Markers. If you’re already a fan of Memento Inks, you’ll want to check these markers out.

Skill Level: Beginner
Time to Complete: 20-30 Minutes

*Some affiliate links are used in this post. That means that if you shop through these links, I may receive a small compensation, at no cost to you.

Supplies:
Imagine:
Memento Markers: London Fog, Gray Flannel, Lady Bug, Cottage Ivy, Angel Pink, New Sprout, Rhubarb Stalk, Bamboo Leaves, Dandelion
VersaFine Clair: Nocturne
VersaFine Clair: Spruce
Brilliance Ink: Moonlight White
Memento Ink: Rhubarb Stalk
Sponge Dauber

Other:
Stampers Anonymous/Tim Holtz: Stamptember 2020 (link is to a similar set)
A Colorful Life Designs: Flurries Stencil
Spellbinders: Hemstitch Rectangle Dies
Spellbinders: Pink Sand Cardstock
Spellbinders: Crimson Cardstock
Strathmore: Smooth Bristol Cardstock
Accent Opaque: 100lb. White Cardstock
Scrapbook.com: Artis Craft Glue
Mint Cardstock
Gray Cardstock

None of these techniques are difficult, but when you combine them you get to use a lot of items that are in your stash to make a really fun and festive card. I hope you’ll give these techniques a try. Thanks so much for stopping by. Have an inspiring day!

Adorable Snowman Card Using Blackout Embossing Technique

Posted on by

By Ceil Pritchett

Hi crafty friends!
It’s Ceal. I am back with a card using the Black Out Technique but I used blue ink instead.

Skill Level: Intermediate
Time: 30 to 45 Minutes

Directions:

Gather your supplies. You will need 3 softer inks and 1 dark ink. A snowflake 3D embossing folder, a snowman stamp set and coordinating dies.

Step 1:
Using the three lighter colors randomly add them to a white panel cut to A2 size.

Step 2:
Place the blended panel inside of the 3D embossing folder and run through the die cutting machine.

Step 3:
Using the darker ink, rub across the entire embossed panel.

Step 4:
Stamp, color and cut out the snowman image along with some diecut snowflakes. Places the pieces on the embossed panel and add to the card base.

Supplies:

Imagine Products:

VersaFine Clair -Lilac Bloom, Very Peri, Bali Blue, Medieval Blue, Nocturne
Memento Marker – Tangelo, Teal Zeal, Gray Flannel
On Point Glue

Other Products:

Mr. Frostie stamp set – Stampers Anonymous/Tim Holtz
Mr. Frostie coordinating dies
Snowflake 3D embossing folder – Simon Says Stamp
Neenah Solar White cardstock – CutCardStock

Design a CAS Christmas Poinsettia Card

Posted on by

By Helen Gullet

Hello crafty friends! It’s the time of the year to start making some Holiday projects. As for me, I love making and sending handmade Christmas cards. Today, I wanna share how to make this CAS Christmas Poinsettia Card.

Let’s get crafting!

Skill: Intermediate
Time: 15-20 minutes

Direction:

Step 1

Cut out a piece of any color cardstock into 4.25 inch x 5.5 inch that you want to use as your background panel.

I used all the words on the stamp set I used so I taped the whole sheet on the stamping tool lid instead of taking it out one by one. You can use any word stamp set you have to create a similar background pattern.

Stamp the words on the cardstock using VersaMark Dazzle. Make sure to cover the whole panel.

Step 2

Add some darker shadow to the edges of the background panel using Memento Dew Drop ink pads and finger sponge dauber.

First, add the Lady Bug ink on the panel, then add the Rhubarb Stalk ink, and then add the Lady Bug ink again to blend them together.

Step 3

Stamp each layer of the poinsettia flower with the Delicata Golden Glitz ink.

Stamp the middle buds part of the poinsettia with the Brilliance Cosmic Copper ink. Dry the stamped images with a craft heat gun.

Cut each of the images with their matching dies, or you can fussy cut them if you don’t have the matching dies.

Step 4

On a piece of white cardstock, stamp the sentiment with VersaFine Clair Nocturne, and then add some of the Sparkle Mboss Embossing Powder, then heat set it with a craft heat gun.

Cut the sentiment with the matching die set, or you can fussy cut it with scissors if you don’t have a matching die.

Step 5

Distress all edges of the background panel with distresser tool or scissors. Add the background panel to the card base with some of the Tear It! Tape.

Add the poinsettia flowers and the sentiment to the card with some of the fun foam and Tear It! Tape for some dimension.

Step 6

For more extra sparkle to the Christmas card, add some splatters of the Sheer Shimmer Craft Spray using a fan brush.

Use the craft heat gun to dry the splatters.

Hope this Christmas card gives you an idea to start your Holiday projects. Thank you for stopping by our blog today. Have a fabulous day!

Craft Supplies

Imagine:

  • Memento (Rhubarb Stalk, Lady Bug)

Others:

  • Poinsettia Wishes Stamp & Die Bundle (Creative Worship Stamps)
  • Neenah Solar White Cardstock 80 lb
  • Neenah Cardstock Multi colors
  • Fan brush
  • MISTI stamping tool
  • Stamping Blocks
  • Micro-tip scissors
  • Craft heat gun
  • Paper trimmer
  • Die cutting Machine