Tag Archives: inkpad

Let’s Make a Rose Postage Card

Posted on by

By Kathi Rerek

It’s summer and the roses are in full bloom. Let’s make a Rose Postage Card with VersaMagic and Delicata Inks!

Skill Level: Intermediate
Time: 1.5 hours

Directions:

Step 1:
Use the Postage Collage die to cut Desert Storm cardstock.

Steps 2A and 2B:
Place a magnetic panel onto the cardstock panel. Use temporary adhesive to secure the Rose Postage Collage die-cut to a piece of scrap paper. Use magnets and low-tack tape to secure the first Rose Postage Collage Stencil to the die-cut. Use a Sponge Dauber to apply Pink Grapefruit VersaMagic Ink over the stencil onto the die-cut (2A). Use another Sponge Dauber to apply Mango Madness VersaMagic Ink over the stencil onto the die-cut, blending the ink as you go (2B).

Keep the Postage-Collage Die-cut panel in place. Remove the stencil and clean. Heat set the collage panel.

Steps 3A and 3B:
Use magnets and low-tack tape to secure the second Rose Postage Collage Stencil to the Postage Collage die-cut. Use a Sponge Dauber to apply Tea Leaves VersaMagic Ink over the stencil onto the die-cut (3A). Use another Sponge Dauber to apply Aloe Vera VersaMagic Ink over the stencil onto the die-cut, blending the ink as you go (3B). Keep the Postage-Collage Die-cut panel in place. Remove the stencil and clean. Heat set the collage panel.

Steps 4A & 4B:
Move the Postage Collage Die-cut panel to the base of a stamping platform. Secure with magnets. Position the postmark, cancellation, cost, and “forever” stamps from the Postage Collage Stamp Set facedown on the panel. Press the platform’s lid onto the back of the stamp, lift, ink the stamps with Morning Mist VersaFine Clair Ink, and stamp (4A). I re-inked and stamped some of the stamps with Nocturne VersaFine Clair Ink to add visual weight.

I decided that I wanted to add the words “With Love” from the second Postage Collage Stencil and that I wanted to add more stamped postage items to the collage.

Step 5:
Move the Rose Postage Collage Die-cut back onto the magnet panel and secure the second Postage Collage Stencil with magnets and low-tack tape overtop. Re-use the Sponge Dauber from Step 2A to apply Pink Grapefruit VersaMagic Ink over the “With Love” words on the stencil onto the Postage Collage Die-cut panel. When done, lift the stencil, clean it, then heat set the Postage Collage Die-cut panel.

Step 6:
Place the Postage Collage Die-cut Panel again onto the base of a stamping platform and secure it with magnets. Place additional postage stamps from Postage Collage Stamp set facedown on the image panel. Press the platform’s lid onto the back of the stamp, lift, ink the stamps with Morning Mist VersaFine Clair Ink, and stamp. When done, remove the Postage Collage Die-cut Panel and heat set.

Step 7:
Move the Rose Postage Collage Die-cut panel back to the large magnet panel. Use magnets and low-tack tape to secure the third Postage Collage Stencil to the Postage Collage Die-cut panel. Use a Sponge Dauber to apply Golden Glitz Delicata Ink over the stencil onto the Postage Collage Die-cut panel.

Step 8:
Use the pouncy tool to apply Golden Glitz Delicata Ink randomly over the Postage Collage Die-cut panel. Heat set the panel and set it aside.

Steps 9A and 9B:
Cut a piece of Desert Storm cardstock to 5.5” x 4.25”. Use temporary adhesive to secure this panel to a piece of scrap paper. Use magnets and low-tack tape to secure the first Postage Collage Stencil to the die-cut. Use a Sponge Dauber to apply Pink Grapefruit VersaMagic Ink over the stencil onto the die-cut (9A). Remove the first stencil and heat set the panel.

Use magnets and low-tack tape to secure the second Postage Collage Stencil to the panel. Use a Sponge Dauber to apply Mango Madness VersaMagic Ink over the stencil onto the die-cut (9B). Remove the stencil and heat set the panel.

Step 10:
Use the pouncy tool to apply Golden Glitz Delicata Ink all over the panel. Heat set.

Step 11:
Use Tear-It! Tape to adhere the Postage Collage Die-cut panel to the 5.5” x 4.25” panel, then use to adhere the panel to an A2 card cut from the same cardstock.

Finished Card

Supplies Used:

Imagine:

Other Supplies:

  • Desert Storm Classic Crest Cardstock by Neenah Papers
  • Postage Collage Clear Stamp Set by Waffle Flower
  • Postage Collage Cutting Die Set by Waffle Flower
  • Postage Collage Stencil Set by Waffle Flower
  • Rose Postage Collage Stencil Set by Waffle Flower
  • Pouncy Tool – Source unknown
  • Low-Tack Tape
  • Magnet Packaging from the Postage Collage Die Cut Set by Waffle Flowers
  • Misti  Stamping Platform by My Sweet Petunia

Let’s Make Waves! Summer Card

Posted on by

By Anna Escalada York

In today’s post, I am sharing a card that features a summer scene.

Skill: Intermediate
Time: 1 hour

Directions:

Step 1:
Use Memento Markers–Dandelion, Cantaloupe, Morocco and Lady Bug to color the sun and
sun rays through a stencil onto watercolor paper. Blend some of the colors together by coloring
a lighter color over a darker one to create even more color variety. Use some ink blenders to ink
blend the sky with Pearlescent Sky Blue Brilliance (closer to the sun) and Ocean Depth
VersaMagic Chalk Ink (farther away from the sun.
Use a sparkly clear gel pen to add sparkle to the clouds. (This ended up being mostly die cut
out.)

Step 2:
Slowly and gently press on the cap of the Sparkle Sheer Shimmer Craft Spray bottle, making
sure to only press about half way so that a small amount of splatters go onto the watercolor
panel. Allow to dry.

Step 3:
Die cut the panel with a mid-sized arch die.

Step 4:
Using daubers, ink blend Red Magic VersaMagic Chalk Ink along the bottom and right side of
the die cut (where the orange and red rays touch the edges) and more of the Ocean Depth
VersaMagic Chalk Ink along the left edge through the upper third part of the right edge (where
the blue sky touch the edges). Don’t ink blend the bottom right corner of the panel (with the sun
and cloud).

Step 5:
Using die two die cuts, die cut some blue and green patterned paper and blue mirror cardstock
to look like waves. (I used leftover die cuts from a previous project.) Glue the blue and green
cardstock wave first, and then glue the blue mirror cardstock on top of it. Make sure the left side
and bottom of both die cuts align with the edges of the arch. Trim the right side of the die cut
waves so that they stop along the edge of the arch.

Step 6:
Use the largest arch die in the set to die cut a piece of sparkly black cardstock for the matte
layer.

Step 7:
Press the Nocturne VersaFine Clair ink onto a small scrap of watercolor paper to create black
cardstock. Die cut two small bird silhouettes out of the black paper.

Step 8:
Use two die cuts to create two layers of a cloud, both out of watercolor paper. Use an ink dauber
to very lightly ink blend Pink Grapefruit VersaMagic Chalk Ink onto the base (larger) layer. Ink
blend the upper player with the same Pink Grapefruit VersaMagic Chalk Ink with a heavier hand
so the layer is a darker pink. Then spray both layers of the cloud with more Sparkle Sheer
Shimmer Craft Spray. After both layers of the cloud are dry, glue them together.
Then glue the cloud onto the right side of the card panel. I positioned my cloud to cover a small
imperfection from the stenciling.

Step 9:
Glue the birds onto the card base. (Optional step: Add glitter to the birds by coloring on them
with a sparkly clear gel pen.
Then glue the main scene onto the black matte layer.

Step 10:
Die cut the sentiment out of the same black sparkly cardstock and attach to the bottom corner of
the upper (stenciled) layer. If desired, die cut a second piece of scrap cardstock with the same
die to add dimension underneath the stencil or to help make the tittle (the dot on the i) pop up as
it doesn’t have layers of die cuts behind it like the rest of the sentiment does.

Step 11:
Glue sequins onto the bottom left corner and upper right part of the card.

Step 12:
Glue the whole card onto an A2-sized white card base.

Art Supplies

Imagine
• Brilliance Pigment Ink – Pearlescent Sky Blue
• Memento Marker – Cantaloupe, Dandelion, Lady Bug, Morocco
• Sheer Shimmer Craft Spray – Sparkle
• VersaFine Clair ink – Nocturne
• VersaMagic Chalk Ink – Ocean Depth, Pink Grapefruit, Red Magic
• Sponge Daubers

Other
• Altenew – Dies – Bold Greetings die set
• Crafty Meraki – Meraki Sparkle Gold (embellishment mix)
• Erin Lee Creative – Cardstock – Viva Las Vegas Cardstock
• Picket Fence Studios – Stencil – Glass Window Sunshine
• Pink and Main – Dies – Stitched Arches Dies
• Sakura – Gel Pen – Stardust Clear Gelly Roll pen
• Stampin’ Up – Dies – Waves (retired)
• Watercolor paper
• Clear embossing powder
• Scissors
• Glue

Simple Foliage Card For Anyone

Posted on by

By Alison Heikkila

Hello! I’m Alison Heikkila and today I have a fun card with a foliage theme today that you can use for pretty much anyone, and almost any occasion. We’re going to use a variety of greens and a couple of fun tricks.

*Some affiliate links are used in this post. That means that if you shop through these links, I may receive a small compensation, at no cost to you. For more information, please see my Affiliates page, where I also have some coupon codes.

Skill Level: Beginner
Time to Complete: 20 minutes

Supplies:
Imagine:
Shady Lane VersaFine Clair
Golden Meadow VersaFine Clair
New Sprout Memento Marker
Olive Grove Memento Marker
Northern Pine Memento Marker
Olive Grove Memento Ink
On Point Glue

Other:
Strathmore: Smooth Bristol Cardstock
Stamper’s Anonymous & Tim Holtz: Sketchy Leaves Stamps
Simon Says Stamp: Painted Hello Die

I love how this came out, and it was so fast to make. Wouldn’t it be fun to try it with different colors….even like pinks and purples? That’s it for me today. Thanks so much for stopping by. Have an inspiring day!

Simple Background Stamping with VersaFine Clair Inks

Posted on by

By Jessica Lin

Hi everyone! Summer is finally here and I’m so excited for the sunny weather! What reminds you of summer? I think of pools, ice cream and acai bowls, which is the inspiration for today’s card. Most of my creations are more advanced with lots of tools and techniques, but I thought today I would do a simple card with just stamps and inks.

Skill: Beginner
Time: 30 minutes

Directions:

Step 1:
I’m using two stamp sets today: Sweet Strawberry and Berry Blessings. I stamped the fruit outline images with VersaFine Clair ink in Nocturne. This is my favorite black ink! Today’s card is a smaller notecard style so I’m stamping on a 6’’ x 6’’ square piece cardstock. I am also trying out a new rotating stamping technique on the We R stamp platform. This is such a fun tool to use to create your own patterned backgrounds. I placed the stamps within the 3’’ x 3’’ grid and rotated the plate 4 times with 90 degrees each time. If you don’t have this particular stamping tool, you could stamp the outlines freehand as well.

Step 2:
I then stamped the layering images with these VersaFine Clair inks. I love the bright, bold colors, especially for a summertime themed card.

Step 3:
To keep the sentiment simple, I used StazOn Pigment ink in Snowflake and stamped it on black cardstock. For a more vibrant look, you could heat emboss with white embossing powder. But the StazOn Pigment ink is a great alternative for beginners with just inks and stamps in their stash. I adhered some sequins with On Point glue as some finishing touches, and a simple summer notecard is complete! Thanks so much for stopping by and I hope you enjoyed this quick project.

Supplies Used:

Imagine Supplies:

Other Supplies:

  • Stampin’ Up! – Stamps – Sweet Strawberry, Berry Blessings
  • We R – Tool – Precision Press
  • Foam Tape
  • Black cardstock
  • White cardstock

“Wishing You A Happy Birthday” Card

Posted on by

By Anna Escalada York

In today’s post, I am sharing a fun, summer card that features some bold colors!

Skill: Intermediate
Time: 1 hour

Directions:

Step 1
Color a piece of acetate packaging with both Cottage Ivy Memento marker and Emerald Fabrico
marker and then spraying the acetate with water. Press the acetate onto a piece of watercolor
paper multiple times, moving the acetate around so add green color around the watercolor
paper. Allow the water to dry.

Step 2
Die cut the watercolor smooshed paper with a circular die cut. Add a small dot of Pink Ultimate
Pigment Pigment Refill into the raised areas of an embossing powder, and then spray the
embossing folder with Sparkle Sheer Shimmer Craft Spray to both help the watercolor paper
stay moist (so it won’t tear) while embossing, and to help dilute the condensed pink refill ink.
Then sandwich the watercolor paper into the embossing powder and run it through a die cutting
machine.
After the watercolor paper has dried, ink blend the edge of the circular die cut with Pink
VersaColor pigment ink.

Step 3
Die cut another piece of watercolor paper with a slightly larger circular die. Directly press the
Pink VersaColor Pigment ink pad onto the watercolor paper.
Optional step: Heat emboss the ink with clear embossing powder.

Step 4 (and 4.5)
Stamp an image onto watercolor paper with a nature scene with Nocturne VersaFine Clair ink.
Heat emboss with clear embossing powder.
Using a variety of media to watercolor the image: Celestial Copper Delicata Ink pad mixed with
water to color the rocks, Emerald Fabrico marker mixed with water to color the frog and leaves,
Bahama Blue Fireworks! Spray to color the sky and water, and Pink Ultimate Pigment Ink Refill
to color the flower petals. Finally, color the centers of the flowers with a Dandelion Memento
marker.

Step 5
Watercolor smoosh some of the leftover inks from the last step to watercolor smoosh a piece of
watercolor paper and then spray the whole thing with Sparkle Sheer Shimmer Craft Spray. Use
some additional color to stamp a text stamp in my stash to add a little interest onto the panel by
pressing the stamp into the acetate instead of an ink pad. Repeat the process a few times until
you like the amount of extra interest that is added. After everything dried, die cut the watercolor
panel.

Step 6
Glue the two circular die cuts (the embossed panel and the larger pink die cut circle)
and then glue it onto the watercolor background panel. After the glue dried, the whole thing was
die cut again to trim the circular die cuts. The edges were ink blended with more Pink
VersaColor Pigment ink. Splatters of the remaining Bahama Blue Fireworks! Spray from the
acetate packaging were added to the panel as well.

Step 7
Stamp a sentiment with Nocturne VersaFine Clair ink.

Optional step: Heat emboss with clear embossing powder.

Step 8:
Die cut sparkly white paper with a slightly larger rectangular die. Glue the main (frog)
stamped and die cut image onto the top panel, glue the matte (sparkly larger panel) behind the
top panel and then glue everything onto an A2-sized white card base. Glue sequins to the card
base.

Art Supplies

Imagine

• Delicata Ink – Celestial Copper
• Fabrico Marker – Emerald
• Fireworks! Spray – Bahama Blue
• Memento Marker – Dandelion
• Memento Marker – Cottage Ivy
• Sheer Shimmer Craft Spray – Sparkle
• Ultimate Pigment Ink Refill – Pink
• VersaColor Pigment ink – Pink
• VersaFine Clair ink – Nocturne
• VersaMark Dazzle – Frost

Other
• Catherine Pooler Designs – Sequins – Milwaukee
• Gina K Designs – Dies – Master Layout 2 die set
• Hero Arts – Dies – Nesting Circles Infinity die set
• Penny Black – Stamp – Thanks, Thanks stamp (retired)
• Vicki Boutin – Embossing Folder – Let’s Wander (retired)
• Watercolor paper
• Clear embossing powder
• Scissors
• Glue

Let’s Make A Mermaid Card

Posted on by

By Kathi Rerek

It’s summer, which makes me want to go to the beach to cool off in the ocean and pretend I’m a mermaid. Let’s make a card that fulfills those dreams using inks, stencils, and stamps!

Skill Level: Intermediate
Time: 1.5 hours

Instructions:

Step 1:
Use a craft knife to cut a piece of Low-tack tape in a curved pattern. Place the tape at the bottom of a 5.5” x 8.5” piece of white cardstock (no photo).

Lightly apply Bahama Blue Memento Ink to the white area of the cardstock.

Steps 2A & B:
Place a magnetic page onto the craft mat. Use low-tack tape to secure the cardstock panel to the magnetic page. Use magnets and low-tack tape to secure the Currents Stencil to the cardstock panel. Use a Sponge Dauber to apply the lightest blue ink from the Kaleidacolor Blue Breeze Ink pad over the stencil onto the cardstock panel (2A). Randomly apply Teal Zeal Memento Ink over the stencil onto the cardstock to deepen the colors.

Step 3:
Remove the stencil, then spritz the panel with 91% Isopropyl Alcohol to blend the inks and add white splatters and splotches.

Step 4:
Remove the low-tack tape and replace with the negative part of the tape cut in Step 1. Sponge Desert Sand Memento Ink over the tape onto the image panel to create the sea floor. Remove the tape.

Step 5:
Place the panel onto the base of a stamping platform and secure with magnets. Position the mermaid stamp from the Guinevere Clear Polymer Stamp Set so that it’s face down along the lower right side of the image panel. Press the platform’s lid onto the back of the stamp, lift, and ink the stamp with Nocturne VersaFine Clair Ink. Stamp. Re-ink and stamp again if necessary to attain a good impression.

Remove the panel and thoroughly heat set the ink.

Step 6:
Use Copic markers to color the mermaid’s rocky throne. Usually I don’t use Copic markers with any ink other than Memento, but since I had duplicate markers, I gave it a shot and it worked!  Sorry! No photos!

Step 7:
Use Triplus pens to color the mermaid’s hair. Use Marine and Black Stardust Glitter Gel Pens to add detail the mermaid’s scales. The ink of both pens work well with most inks. Sorry! No photos again!

Steps 8A & B:
Place the image panel back onto the base of the stamping platform and secure with magnets. Use low-tack tape to cover the top of the ocean floor to the left of the mermaid.

Position the mid-sized Skeleton Tree stamp from the Skeleton Tree Clear Stamp Set facedown on the top left. Press the lid of the platform onto the back of the stamp and lift. Ink the stamp with Summertime VersaFine Clair Ink and stamp (8A). Remove the tape.

Remove, clean and dry the stamp. Reposition the mid-sized Skeleton Tree stamp so that it’s facedown on the bottom left of the image panel. Position the smallest Skeleton Tree Stamp from the facedown on the bottom right of the image panel

Press the lid into the back of the stamps and lift. Ink both stamps with Summertime VersaFine Clair Ink and stamp (8B). Remove the stamps from the platform.

Step 9:
Position the bubbles stamp from the Faerie Clear Polymer Stamp Set facedown on the image panel slightly above the mermaid’s outstretched hand. Press the lid into the back of the stamps and lift. Ink the stamp with Morning Mist VersaFine Clair Ink and stamp. Remove the panel from the platform. Heat set the panel.

Step 10:
Place the image panel back onto the magnetic page. Use magnets and low-tack tape to secure the Sunshine Small Stencil over the image panel as shown. Sponge White Shimmer Delicata Ink over the stencil onto the image panel. Remove the panel and heat set.

Step 11:
Use Tear-It! Tape to adhere the image panel to a black A2 card.

Finished Card

Imagine Supplies:

Other Supplies:

  • Guinevere Clear Polymer Stamp by Lavinia Stamps
  • Skeleton Trees Clear Polymer Stamp Set by Lavinia Stamps
  • Faerie Clear Polymer Stamp Set by Visible Image
  • Small Sunshine Stencil by Darkroom Door
  • Currents Stencil by A Colorful Life Designs
  • W3, W4, W6, BG45, BG57, E93, E95 by Copic Markers
  • Ultramarine, Orange, Yellow Orange, Rusty Orange Triplus Pens by Staedtler
  • Marine and Black Stardust Gelly Roll Gel Pens by Sakura of America
  • Low-Tack Tape
  • Magnet Page used for die-cut storage
  • Misti  Stamping Platform by My Sweet Petunia