Tag Archives: brilliance dew drop ink pads

Catnapping by UFO Fun Creation

Posted on by

By Kathi Rerek

– Here’s a rare project from me that with no stamping at all. I’ve used inks, stencils, and cutting dies to create what will either be a wall hanging or a journal page.

Skill Level: Beginner to Intermediate

Time: 1.5 hours

Step 1.

Secure the UFO stencil to a piece of cardstock with removable tape on both sides of the paper, creating a hinge. Apply Platinum Planet Brilliance over the stencil onto the cardstock. Open the hinged stencil and heat set the image panel.

Step 2:

Put the UFO stencil back in place. Use a sponge dauber to apply Silver Shimmer Delicata over the stencil onto the image panel. Open the hinged stencil and heat set the image panel.

Step 3:

Use a brush-tipped Fantastix to apply Dandelion Memento ink through the UFO’s windows onto the image panel. Remove and clean the stencil.

Step 4:

Touch up the windows with the Fantastix. Use a grey watercolor marker to color the window frames and the bottom aperture of the UFO.

Step 5:

Fussy-cut the UFO, edge with a dark marker, and set aside.

Step 6:

Use a sponge dauber to apply Danube Blue onto a 4.75” x 6.75” piece of Bristol Paper. Use a sponge dauber to blend Paris Dusk onto the Bristol Paper to create a mottled background.

Step 7:

Tape the Time Tunnel Stencil over the inked background panel. Use a sponge dauber to apply Paris Dusk Memento ink over the stencil onto the paper.

Step 8:

Squeeze a few drops of Moonlight White Brilliance re-inker onto a craft mat. Spray with 91% Isopropyl Alcohol. Use a paintbrush to mix the ink. Load the paintbrush with the diluted Moonlight Brilliance ink and splatter the background panel. Let air dry or heat set.

Step 9:

Use the Mini Cats die to cut Raven cardstock. Set the cat dies aside.

Step 10:

Use a sponge dauber to apply Bamboo Leaves Memento ink onto a white cardstock panel. Repeat Cottage Ivy Memento ink until the panel is covered.

Step 11:

Use the Grassy Hills Die set to cut the inked panels. Use a green Copic marker to edge the grass and to add details. Using Memento Ink to create backgrounds allows you to use Copic markers overtop!

Step 12:

Cut a piece of vellum to 6” square. Score on the diagonal from one point to the opposite point. Fold.

Repeat with both sides until it looks like the above photo.

Step 13:

Place one edge of the scored, folded square along the cutting edge of a guillotine trimmer. Cut.

Step 14:

Use On Point Glue to adhere the die-cut cats to the interior of the folded vellum triangle. Sorry that I forgot to take a photo.

Step 15:

Back a piece of vellum with two-sided tape. Use the Oval Shadows Die-namics to cut the vellum.

Step 16:

Use Tear It! Tape to adhere the three layers of grass to the background panel as shown. Edge the panel with VersaFine Clair Nocturne .

Adhere the vellum cone and the vellum oval as shown. Use On Point Glue to adhere escaping and/or partially beamed-up cats atop the vellum oval and cone.

Use dimensional foam adhesive to adhere the UFO as shown.

Step 17:

Adhere the image panel to a 5” x 7” piece of Black Mixed Media paper. Add the sentiment sticker to finish the piece.

Imagine Crafts Supplies:

Other Supplies:

  • Solar White Classic Crest Cardstock by Neenah Papers
  • Bristol Paper by Strathmore
  • Raven Cardstock by Bazzill Basics
  • 140 lb. Black Mixed Media Paper by Strathmore
  • Vellum: Source Unknown
  • UFO Stencil by Funky Fossil
  • Time Tunnel Stencil by Visible Image
  • Grey Stone Zig Photo Twin Marker by Kuretake
  • YG 45 Copic Marker
  • Grassy Hills Die-namics Set by My Favorite Things
  • Ovals Shadows Die-namics Die Set by My Favorite Things
  • Mini Cats Die Cut Set by Impression Obsession
  • Small Talk Idea-ology Stickers by Tim Holtz for Adventus
  • 91% Isopropyl Alcohol
  • Heat Gun by EK Success
  • Mini Guillotine Trimmer by Tim Holtz for Tonic
  • Big Shot

Let’s Make a Gel Print Cat Card

Posted on by

By Kathi F. Rerek 

Using a Gel Press with VersaFine Clair inks is a great way to create a quick background.

Skill Level: Beginner to Intermediate

Time: 1 hour

Directions:

Step 1.

Use a 2” brayer to apply Paradise VersaFine Clair ink to the top part of a 4” round gel press. Clean the brayer, then use to apply Green Oasis VersaFine Clair Ink to the bottom  of the gel press.

Press a 6” x 4.25” piece of mixed media paper onto the gel press and pull the print. I actually used a leftover panel from a previous gel print session that was not successful.

Step 2:

Mist the print with with 91% Isopropyl Alcohol.

Use Fantastix to apply Verdant VersaFine Clair Ink to even out the green area of the print and then apply Rain Forest VersaFine Clair Ink to add dimension.

Step 3:

Use paper towel to gently dab the sky and grassy areas of the print with Purell to further blend the ink.

Heat set.

Step 4:

Use magnets to secure the image panel to the base of a stamping platform.

Position the stretching cat stamp from the The Furieux/Caffeinated Cats Unmounted Stamp Set facedown so that its paws are on the grass.

Ink the stamp with Nocturne VersaFine Clair Ink and stamp. Re-ink and stamp again if needed. Remove the stamp and heat set the panel.

Step 5:

The left paws were stamped slightly above the grass, so I used Fantastix and Green Oasis VersaFine Clair Ink to add a tuft of grass under his floating paws and to add detail to the lawn.

Step 6:

Use a Sponge Dauber to apply Pearlescent Sky Blue Brilliance Ink around the image circle, leaving a bit of a halo effect around the circle.

Step 7:

Tape the image panel to the back of the Pawprint Stencil so that the smallest paw prints run horizontally across the top of the image panel.

Use Sponge Daubers to apply Pearlescent Sky Blue and Mediterranean Blue Brilliance Inks over the stencil onto the image panel.

Remove and clean the stencil, then repeat the steps above to stencil the small paw prints across the bottom of the image panel.

Lift the stencil and use the Sponge Dauber to edge the panel with Mediterranean Blue Brilliance Ink. Heat set the panel.

Step 8:

Use a Sponge Dauber to apply Pearlescent Sky Blue Brilliance Ink to a strip of white cardstock. Heat set.

Secure the cardstock strip to the base of a stamping platform. Position the “You talking’ to me?” sentiment from the Whatchamacallit Unmounted Stamp Set facedown on the strip.

Ink the stamp with Nocturne VersaFine Clair Ink and stamp. Heat set.

Use scissors or a die-cut to cut the sentiment and edge it with Mediterranean Blue Brilliance Ink. Heat set.

Step 9:

Cut a piece of white cardstock to 9” x 6.25”, score at 4.5”, and fold to form a 4.5” x 6.25” card.

Use a Sponge Dauber to apply Mediterranean Blue Brilliance Ink around the the edges of the card. Heat Set.

Step 10:

Use Tear It! Tape to secure the image panel to the card front.

Step 11:

After looking at the finished card,I decided that the card needed a larger sentiment up at the top left.

Secure the entire card with magnets to the base of a stamping platform. Position the “Hello” stamp from the Holiday Quotes. Unmounted Stamp Set facedown on the upper left. Use Nocturne VersaMark Ink to stamp the sentiment. Heat set.

Supplies used:

Imagine:

Other Supplies:

  • 140 lb. Mixed Media Paper by Strathmore
  • Solar White Classic Crest Cardstock by Neenah Papers
  • The Furieux/Caffeinated Cats Unmounted Stamp Set 127 by Katzelkraft
  • Whatchamacallit Unmounted Stamp Set 276 by Katzelkraft
  • Holiday Quotes Unmounted Stamp Set 207 by Katzelkraft
  • 4” Circle Gel Press
  • Paw Prints 6×6 Stencil by KaiserCraft
  • Lemon Yellow Zig Clear Color Real Brush Marker by Kuretake
  • 91% Isopropyl Alcohol
  • Purell
  • Stamping Platform
  • Heat Gun by EK Success

Create a Magical Card with Brilliance Inks

Posted on by

By Kathi Rerek 

Intro: Brilliance inks blend beautifully and the pearlescent ones create a beautiful shimmer that enhances magical scenes like this one.

Skill Level: Beginner to Intermediate

Time: 1 hour

Directions:

Step 1.

Use a Sponge Dauber to apply Mediterranean Blue Brilliance ink horizontally across the top of a 4” x 5.25” panel of white cardstock. Use a Sponge Dauber to apply Pearlescent Sky Blue Brilliance ink below the darker blue. Use both daubers to create a blended shimmery sky.

Use a Sponge Dauber to apply the Pearlescent Coral Brilliance ink from the Aurora 3-Color Brilliance Ink Pad. Sorry that there’s no photo!

Step 2:

Tape the image panel to the back of the Clouds Stencil.

Using a Sponge Dauber, apply Moonlight White Brilliance ink over the stencil onto the image panel.

Remove the stencil and heat set the ink.

Step 3:

Use magnets to secure the ink-sponged panel approximately .5” from the right edge and 1” from the bottom of the stamping platform.

Position the Cityscape Reflections Stamp facedown along the bottom of the stamping platform.

Ink the stamp with Nocturne VersaFine Clair Ink and stamp. Re-ink and stamp again if needed. Remove the stamp and heat set the panel.

Step 4:

Move the image panel so that it’s flush the right and bottom edges of the stamping platform. Secure with magnets.

Position the Silhouette Lady with Umbrella Stamp facedown along the right edge above the cityscape.

Ink the stamp with Nocturne VersaFine Clair Ink and stamp. Re-ink and stamp again if needed. Remove the stamp and heat set the panel.

Step 5:

Trim the image panel to 3 7/8” x 5 1/8”.

Use a Sponge Dauber and Mediterranean Blue Brilliance Ink to edge the image panel.

Step 6:

Cut a piece of Raven cardstock to 4” x 5.25”.

Use Tear It! Tape to adhere the image panel to the black cardstock.

Step 7:

Create an A2 Card from White cardstock.

Use a Sponge Dauber to apply Mediterranean Blue Brilliance Ink to the outer .5” of the folded card. Heat set.

Step 8:

Use Tear It! Tape to adhere the image panel to the card.

Adhere the sentiment sticker to finish the card.

Imagine Crafts Supplies:

Other Supplies:

  • 140 lb. Bristol Paper by Strathmore
  • Raven Black Cardstock by Bazzill Basics
  • Solar White Classic Crest Cardstock by Neenah Papers
  • Cityscape Reflections Cling Rubber Stamp by Andy Skinner for Creative Expressions
  • Silhouette Lady With Umbrella Unmounted Rubber Stamp by Lost Coast Stamps
  • Small Talk Idea-ology Stickers by Tim Holtz for Advents
  • Stamping Platform
  • Heat Gun by EK Success

Layered Stamping with VersaMagic Dew Drop Inks

Posted on by

All Things Fabulous IG

By Jessica Lin

Hi everyone, it’s Jessica here and I have a Spring-inspired Mother’s Day card to share with you. I have always loved stamp layering and decided to use this new floral stamp set. I paired it up with my all-time favorite ink – VersaMagic Dew Drop, which has great coverage and some of the prettiest pastel colors.

Skill: Intermediate

Directions:

Art Supplies

Imagine:

• VersaFine Clair – Nocturne

• VersaMagic Dew Drop

Pixie Dust, Pink Grapefruit, Pink Petunia (Malted Mauve works well too), Thatched Straw, Mango Madness, Aquatic Splash, Turquoise Gem, Aloe Vera, Tea Leaves

• Brilliance Dew Drop – Galaxy Gold

Other products:

• Beautiful Moments stamp set

• All Things Fabulous stamp set and dies

• A Wish for Everything stamp set and dies

• Neenah Solar White cardstock

• Vellum