Pawsome Card with VersaColor and Memento Inks

Posted on August 26, 2023 by Imagine

By Kathi Rerek

Cats rule the internet and my heart. Here’s a quick card created with inks, stencils, and white paper.

Skill Level: Beginner to Intermediate

Time: 1.5 hours

Directions:

Step 1.

Roll a 4” Brayer onto a Pink VersaColor inkpad, then apply the ink onto a 5” x 7” Gel Press. Place a 5” x 7” panel of Bristol Paper onto the Gel Press, press the back of the paper to pull the print. Heat set the ink.

Step 2:

Position the quote on the Life with Cats stencil along the bottom of the inked paper panel. Use tape to secure the stencil to the back of the panel.

Use a Sponge Dauber to apply London Fog Memento Ink over the stencil onto the inked panel. Remove the stencil.

Step 3:

Position the Pawsome Hearts stencil to the center of the inked panel. Use tape to secure the stencil to the back of the panel.

Use a Sponge Dauber to apply Pink VersaColor Ink over the stencil onto the inked panel.

Remove the stencil and heat set the inked panel.

Step 4:

Use the Sponge Dauber to edge the stenciled panel with Pink VersaColor Ink. Heat set.

Step 5:

Use a stamping platform and Nocturne VersaFine Clair Ink to stamp two cats from the Cat Capers Clear Stamp Set onto a panel of Bristol Paper. Heat set.

Step 6:

Fussy-cut both cats.

Step 7:

Smoosh London Fog Memento Ink onto a craft mat. Mist with water. Use a fine paintbrush to color the cats’ fur. Clean the ink off of the craft mat and the paint brush.

Repeat the above steps with Rose Bud Memento Ink to color the cheeks, nose, and ears. Bamboo Leaves Memento Ink for their eyes and the fish body, and Bahama Blue Memento Ink for the bird and the fish head and tail.

Step 8:

Position the corner flourish of the stencil on the upper right corner of the background panel. Secure with tape on the reverse.

Use a Sponge Dauber to apply London Fog Memento Ink over the stencil onto the panel.

Remove the stencil. Clean and dry it thoroughly.

Flip the stencil, position the corner flourish of the stencil on the upper left of the background panel. Secure with tape on the reverse.

Use a Sponge Dauber to apply London Fog Memento Ink over the stencil onto the panel.

Remove the stencil. Use a Sponge Dauber to edge the panel with London Fog Memento ink.

Step 9:

Use On Point Glue to secure the cats to the background panel as shown.

Step 10:

Create a 7” x 5” card from white cardstock. Apply London Fog Memento Ink around the edges of the white cardstock.

Step 11:

Use Tear It! Tape to adhere the panel to the inked card.

Craft Supplies:

Imagine Crafts :

Other Supplies:

Bristol Paper by Strathmore
Solar White Classic Crest Cardstock by Neenah Papers
Cat Capers Clear Stamp Set by Funky Fossil Designs
Pawsome Hearts Stencil by Funky Fossil Designs
Life Is Better With Cats Stencil by Stamperia
PS190 Stencil by ScrapCozy for PaperArtsy
Stamping Platform
Heat Gun by EK Success

Let’s Make a Gel Print Cat Card

Posted on July 27, 2023 by Imagine

By Kathi F. Rerek

Using a Gel Press with VersaFine Clair inks is a great way to create a quick background.

Skill Level: Beginner to Intermediate

Time: 1 hour

Directions:

Step 1.

Use a 2” brayer to apply Paradise VersaFine Clair ink to the top part of a 4” round gel press. Clean the brayer, then use to apply Green Oasis VersaFine Clair Ink to the bottom of the gel press.

Press a 6” x 4.25” piece of mixed media paper onto the gel press and pull the print. I actually used a leftover panel from a previous gel print session that was not successful.

Step 2:

Mist the print with with 91% Isopropyl Alcohol.

Use Fantastix to apply Verdant VersaFine Clair Ink to even out the green area of the print and then apply Rain Forest VersaFine Clair Ink to add dimension.

Step 3:

Use paper towel to gently dab the sky and grassy areas of the print with Purell to further blend the ink.

Heat set.

Step 4:

Use magnets to secure the image panel to the base of a stamping platform.

Position the stretching cat stamp from the The Furieux/Caffeinated Cats Unmounted Stamp Set facedown so that its paws are on the grass.

Ink the stamp with Nocturne VersaFine Clair Ink and stamp. Re-ink and stamp again if needed. Remove the stamp and heat set the panel.

Step 5:

The left paws were stamped slightly above the grass, so I used Fantastix and Green Oasis VersaFine Clair Ink to add a tuft of grass under his floating paws and to add detail to the lawn.

Step 6:

Use a Sponge Dauber to apply Pearlescent Sky Blue Brilliance Ink around the image circle, leaving a bit of a halo effect around the circle.

Step 7:

Tape the image panel to the back of the Pawprint Stencil so that the smallest paw prints run horizontally across the top of the image panel.

Use Sponge Daubers to apply Pearlescent Sky Blue and Mediterranean Blue Brilliance Inks over the stencil onto the image panel.

Remove and clean the stencil, then repeat the steps above to stencil the small paw prints across the bottom of the image panel.

Lift the stencil and use the Sponge Dauber to edge the panel with Mediterranean Blue Brilliance Ink. Heat set the panel.

Step 8:

Use a Sponge Dauber to apply Pearlescent Sky Blue Brilliance Ink to a strip of white cardstock. Heat set.

Secure the cardstock strip to the base of a stamping platform. Position the “You talking’ to me?” sentiment from the Whatchamacallit Unmounted Stamp Set facedown on the strip.

Ink the stamp with Nocturne VersaFine Clair Ink and stamp. Heat set.

Use scissors or a die-cut to cut the sentiment and edge it with Mediterranean Blue Brilliance Ink. Heat set.

Step 9:

Cut a piece of white cardstock to 9” x 6.25”, score at 4.5”, and fold to form a 4.5” x 6.25” card.

Use a Sponge Dauber to apply Mediterranean Blue Brilliance Ink around the the edges of the card. Heat Set.

Step 10:

Use Tear It! Tape to secure the image panel to the card front.

Step 11:

After looking at the finished card,I decided that the card needed a larger sentiment up at the top left.

Secure the entire card with magnets to the base of a stamping platform. Position the “Hello” stamp from the Holiday Quotes. Unmounted Stamp Set facedown on the upper left. Use Nocturne VersaMark Ink to stamp the sentiment. Heat set.

Supplies used:

Imagine:

Other Supplies:

140 lb. Mixed Media Paper by Strathmore
Solar White Classic Crest Cardstock by Neenah Papers
The Furieux/Caffeinated Cats Unmounted Stamp Set 127 by Katzelkraft
Whatchamacallit Unmounted Stamp Set 276 by Katzelkraft
Holiday Quotes Unmounted Stamp Set 207 by Katzelkraft
4” Circle Gel Press
Paw Prints 6×6 Stencil by KaiserCraft
Lemon Yellow Zig Clear Color Real Brush Marker by Kuretake
91% Isopropyl Alcohol
Purell
Stamping Platform
Heat Gun by EK Success

How to Make a Lunar Cat Greeting Card

Posted on October 26, 2021 by Imagine

2021-oct-kyriakos-moon-cat-card-700-wm

By Kyriakos Pachadiroglou –

Create a dark sky background by blending MEMENTO inks on white card stock and adding details with sprinkles of All-Purpose ink White and Wisteria colors. Use the On Point glue to set little rhinestones and the Tear It! Tape to attach the background to a card base.

Skill: Beginner

Time: 1 Hour

Directions:

2021-oct-kyriakos-moon-cat-card-step1

Step 1

Cut a 4x6in piece of heavy card stock and using a jumbo Sponge Dauber heavily distress it with the MEMENTO Paris Dusk ink pad.

2021-oct-kyriakos-moon-cat-card-step2

Step 2

Repeat with the MEMENTO Grape Jelly ink pad.

2021-oct-kyriakos-moon-cat-card-step3

Step 3

Use a small Sponge Dauber to add more detail with VersaColor Indigo ink pad.

2021-oct-kyriakos-moon-cat-card-step4

Step 4

Sprinkle All-Purpose White and Wisteria inks on the card piece and let it dry.

Step 5

Cut a 3 /14″ circle and color with VersaFine CLAIR Golden Meadow, while pressing the Sponge Dauber a bit on some place creating spots imitating the moon surface.