Hello friends! It’s Ceal here. Today I am sharing ho I made this legendary Father’s Day card.
Skill Level: Intermediate Time: 45 minutes
Directions:
Gather your supplies. You will need a stencil, Father’s Day themed stamp set, stencil, coordinating dies, Misti or other stamp positioner, three colors of blue ink, a green and brown ink.
Step 1: Place stencil on grip mat inside the Misti. Blend a light color of blue ink in the top third of the stencil.
Step 2: Blend a medium color of blue ink in the middle third of the stencil.
Step 3: Blend a dark color of blue on the bottom third of the stencil.
Step 4: Using green and brown ink, stamp the trees inside the stencil.
Step 5: Stamp the sasquatch and sentiments in black ink. Cut out the sasquatch with the coordinating die and the sentiments with a trimmer.
Step 6: Adhere the panel to a card base and pop up the sasquatch using foam tape and then add sentiments.
Hi everyone! It’s Jessica here. Today’s project is inspired by the Pantone color of this year – Mocha Mousse. It is such a warm, rich shade that is perfect for a coffee card! I decided to compare the different brown and earthy tones in the VersaFine Clair ink line as well. There are many options to choose from, and each is special on its own.
Step 1: Today I will be using an acrylic stamp set from iCrafter. It is called Latte Coffee and has several sets of coffee cup images. Since the image outlines are superfine, I chose VersaFine Clair inks to stamp with to ensure crisp, clean images. I typically stamp the outline images with Nocturne (the black color of this ink line). However, when I was experimenting with the colors, I found that Fallen Leaves is a great alternative. The dark brown color adds more warmth than black and complements the other earthy tones well. I love VersaFine Clair inks and use them very regularly, but Fallen Leaves was probably the one I reach for the least. I think I will start using it to stamp outline images from now on!
Step 2: I used Sand Dune to stamp the first latte art image. This is one of the newer VersaFine Clair colors. I am really happy that they added a lighter earth shade to this collection.
Step 3: For the second latte art stamp, I used Pinecone. This is also a rich, dark brown color. It is just a bit lighter than Fallen Leaves.
Step 4: I used Acorn for the bottom coffee image with the swirl. It is a great middle-tone that completes the brown color gradient.
Step 5: Today’s card is simple and beginner-friendly with easy layered stamping. However, you could also add a little flair by embossing the front panel of the card base. Embossing folders are easy to use and add such a great wow factor to your project. The one I am using today is called Brick & Mortar. I think it reminds me of the walls of a cute coffee shop!
Step 6: Finally, I stamped this super cute sentiment with Sand Dune, and that completes today’s coffee card!
As a mom of a teen and tween, I wanted to make a snarky piece of home decor that would make them smile. So I decided to make a pretty piece of art that I was going to put up in our dining room.
Skill: Intermediate Time: 3 hours
Directions:
Step 1: Paint a thin layer of white gesso onto a 5” by 7” medium density fiberboard (MDF) panel.
Step 2: Glue a ripped piece of text-based patterned paper onto the left side of the panel, making sure that the paper doesn’t go off the side of the fiberboard panel. Then paint over the whole panel again with more white gesso.
Step 3: Stamp a long, floral image onto white watercolor paper with Nocturne VersaFine Clair ink and then heat emboss it with clear embossing powder. Then color the main branch and ribs of the leaves with Northern Pine Memento Dual Marker and the flowers with Lady Bug Memento Dual Marker.
Step 4: Die cut the long, floral image. Spray Cottage Ivy Fireworks! Shimmery Craft Spray onto a piece of scrap acetate packaging and watercolor paint the leaves and edges of the floral image green, making sure to blend the darker marker color with the lighter spray. Set aside to dry.
Step 5: Add texture to the fireboard panel. Use some of the remaining Cottage Ivy Fireworks! Shimmery Craft Spray mixed with more white gesso to create a light green paint. Paint the center part of the fireboard panel with the light green paint. Then watercolor smoosh more of the Cottage Ivy Fireworks! Shimmery Craft Spray (without any gesso) onto the panel to add texture. After the spray and paint have dried, press Celestial Copper Delicata Ink through a circular stencil overlapping the patterned paper. Then press the Celestial Copper Delicata Ink pad around the edges of the panel.
Step 6: Stamp a large butterfly on another piece of watercolor paper using Nocturne VersaFine Clair ink and heat emboss with more clear embossing powder. Then spray Lilac Posies Fireworks! Shimmery Craft Spray onto more scrap acetate packaging and watercolor spray the butterfly. Spray the whole thing with Sparkle Sheer Shimmer Craft Spray, which forces the Lilac Posies spray to diffuse outside of the butterfly’s outline. After the spray dried, die cut the butterfly with the corresponding die. Finally, paint the butterfly a second time with more of the Lilac Posies Fireworks! Shimmery Craft Spray to deepen the color. Set aside to dry.
Step 7: Return to the background panel. Attach two types of washi tape to the left side of the panel–small pieces of black and white dotted washi tape and a white piece of washi tape that comes die cut in a lacy geometric pattern.
Then stamp a sentiment on the lower right part of the panel with more Nocturne VersaFine Clair in and heat emboss with more clear embossing powder.
Step 8: Using a small musical note stamp, partially stamp the panel multiple times with Spuce VersaFine Clair ink.
Step 9: Stamp the smaller butterfly twice with more Nocturne VersaFine Clair ink and heat emboss them with clear embossing powder. Then color them in with Lulu Lavender and Tangelo Memento Dual Markers (orange butterfly) and with Tangelo and Grape Jelly Memento Dual Markers (purple butterfly). Then spray both butterflies with Sparkle Sheer Shimmer Craft Spray. Once the spray had dried, die cut the butterflies with their corresponding die.
(In the final piece, only the orange butterfly colored with Tangelo and Lulu Lavender Memento Dual Markers was used.)
Step 10: Stamp part of the mountain outline stamp on the lower right part of the panel with more Nocturne VersaFine Clair ink and heat emboss with clear embossing powder. Then stamp part of the sun stamp with Summertime VersaFine Clair Ink.
Step 11: Spray around the sun with Cantaloupe Fireworks! Shimmery Craft Spray. Use a paintbrush or your finger to move dots of the Cantaloupe spray to make the spray less uniform and more organic.
Step 12: Glue the flowers and small butterfly onto the panel. Attach the larger butterfly to the panel with foam tape. If desired, the outer tips of the top wings can be given additional dimension with two layers of foam tape, forcing them to curve.
Other Altenew – die set – All Things Orange Altenew – stamp set – All Things Orange Altenew – foam tape – Instant Dimension Foam Tape Altenew – washi tape – Many Dots Art Alternatives – MDF Panel (5” x 7”) Golden – Gesso Semi-Opaque Acrylic Primer Ink Road Stamps – stamp set – Roadies 8 (sentiment stamp) Visible Image – die set – Antisocial Butterfly Visible Image – stamp set – Antisocial Butterfly Circular stencil Die cut washi tape Watercolor paper Vellum Pencil Paintbrush Die cutting machine Paint brush Scissors Glue Text-based patterned paper Clear embossing powder
Hello crafty friends! Today, I wanna share with you a fun technique to make a card for a mom. We are going to do some watercoloring with VersaColor ink pads and also heat-embossing technique. So… Let’s get some ink pads and watercoloring together!
Skill: Beginner Time: 15-20 minutes
Direction:
Step 1 Cut out a piece of watercolor cardstock (or mixed media paper would work, too) into a 4.25 inch x 5.5 inch card panel. Prep the background watercolor cardstock panel with some anti-static embossing powder. Then, stamp the music sheet background stamp with VersaMark ink pad randomly on it, and add some of the white opaque embossing powder. Heat the embossing powder with a craft heat gun.
Step 2 Dab some inks of the VersaColor Turquoise ink pad on the craft mat and then spray with some water. Smoosh the watercolor panel into the ink on the craft mat, dry the ink, and repeat the smooshing and drying the ink as needed.
Step 3 Add some ink splatter on the background panel with a fan paint brush, and dry it with a craft heat gun.
Step 4 Distress the edges of the background panel with a distress tool or you can use scissors for this distress technique.
Add the background panel to the card base with On Point Glue.
Step 5 Stamp the magnolia and leaf images on another piece of watercolor cardstock with the VersaFine Clair Nocturne using the stamping tool. Repeat the stamping if needed.
Add some of the clear embossing powder on the stamped images while the ink is still wet and then heat it with a craft heat gun.
Step 6 On the craft mat, dab some inks of the VersaColor Canary ink pad and VersaColor Turquoise ink pad, and then spray them with some water. And then, color the leaves and branches with the watercolor inks. Set aside to dry or dry it with a craft heat gun.
Step 7 Dab some of the ink of the VersaColor Pink ink pad on the craft mat and spray it with some water. Then, color the magnolia flowers and set aside to dry or dry it with a craft heat gun.
Step 8 When all the watercolor images dried well, fussy cut them with micro-tip scissors. Add them to the card with On Point Glue.
Step 9 Stamp the letters m-o-m on a piece of white cardstock with VersaFine Clair Nocturne. Dry the stamped word MOM with a craft heat gun and then fussy cut it with micro-tip scissors.
Step 10 On the white cardstock, stamp also the second sentiment with VersaFine Clair Nocturne, dry the ink with a craft heat gun, and then trim it into a sentiment label.
Step 11 Add the word MOM on the card with On Point Glue.
Cut out 3-4 strips of white cardstock smaller than the second sentiment label, add them on the back of the sentiment label with On Point Glue, this will add an extra dimension to the sentiment that is not as thick as foam tape. Add the sentiment to the card with On Point Glue.
Step 12 Final step, to add extra texture to the background by adding some white paint splatters. Mix a little bit of white acrylic paint with water on the craft mat, pick it up with a fan paint brush, and then splat some of the paint to the card.
Dry the splatter paint with a craft heat gun.
This simple mixed media card is done. I love how it turns out and hopefully you do, too. I like how VersaColor ink pads are not just for stamping but also work as a watercoloring medium.
Hello Friends! Tracy here and today I am excited to share this really easy galactic, out of this world background technique!
In today’s video tutorial I am sharing how I use some Memento, VersaMagic, Brilliance, and VersaFine Clair inks to create this stunning card along with a paint pen, a stencil from my stash and some holographic embossing powder!
Hello friends, Katy here and in today’s video tutorial, I’m going to show you how to add some gilding to your stamped images as well as how to add some texture to your silhouette stamps using a swiping technique. I will be using Memento inks and Brilliance Galaxy Gold for the gilding. This technique is so quick and I think you will like the end result. I created a thank you card for today, but as always you could put any sentiment you like on this design. Listed below are products I used in todays video including some Affiliate links at no additional cost to you. l thank you for using those links and supporting my work.
Imagine Blog 