Make a Fun Easter Card

Posted on March 25, 2026 by Imagine

By Ceal Pritchett

Hello crafty friends!

It’s Ceal, here. Today I am sharing how to make this cute Easter card. I love the elements to this card; the flowers are gorgeous, and the bunnies are super cute. You could leave off the eggs and easter sentiment and it becomes a spring card.

Skill: Intermediate to Advanced
Time: 45 Minutes

Directions:

Gather your supplies. To make this card you will need a stamp set that has bunnies, eggs and flowers, along with coordinating dies. Several colors of inks, some markers and a re-inker.

Step 1:
Stamp the flowers in a black ink. I used Memento Tuxedo Black

Step 2:
Color the flowers using the coordinating stencils. Stencil one is a light green. I used VersaMagic Tea Leaves

Step 2a
Stencil two is a darker green. I used VersaMagic Touch of Pesto

Step 2b:

Stencil three is a dark red. I used VersaMagic Red Magic.

Step 2c:
Stencil four is a peachy pink. I used VersaMagic Pink Grapfruit

Step 3:
Stamp the bunnies using a black ink. I used Memento Tuxedo Black.

Step 4:
Using the coordinating stencil color the bunnies a light brown. I used Memento Desert Sand.

Step 5:
Cut a panel of light blue cardstock 5.25 x 4. Using a paint brush and a re-inker splatter the panel with a light blue ink. I used Memento Summer Sky.

Step 6:
Stamp the eggs in colored inks. I used VersaMagic Mango Madness, Turquoise Gem and Pink Grapefruit.

Step 7:
Color in the eggs with markers. I used Memento markers in Dandelion, Summer Sky and Angel Pink

Step 8:
Cut out all the elements and arrange them as you wish on the blue panel, stamp the greeting on the panel and then finish the card by adhering the panel to the base.

Craft Supplies:

Imagine Products:

• VersaMagic Dew Drops
– Red Magic
– Pink Grapefruit
– Mango Madness
– Turquoise Gem
– Tea Leaves
– Hint of Pesto

• Memento Markers
– Dandelion
– Pink Angel
– Summer Sky

• Memento Ink Pad
– Desert Sand

• Sponge Daubers

Other Products:
• My Monthly Hero February 2026 Kit – Hero Arts
• Sentiment – My Favorite Things \\\\

Grunge Flowers Spring Card

Posted on March 28, 2024 by Imagine

By Kathi Rerek

Let’s experiment with Imagine’s fabulous Walnut Ink Sprays!

Skill Level: Intermediate
Time: 1 hour

Step 1:
Using a stamping platform, ink the Grunge Flower stamp with Nocturne VersaFine Clair ink and stamp. Re-ink and stamp again if necessary to attain a good. Impression. Stamp a second time onto repositionable sticker paper. Fussy-cut the sticker paper version to be used as a mask later.

Steps 2A and 2B :
Spray Cherry Blossom Walnut Ink into a small container (2A). Add water into a second container. Use a paint brush to watercolor the flowers’ petals, varying the intensity of the color by diluting the ink with water (2B). When done, wash and dry the containers.

Steps 3A and 3B:
Spray Lilac Walnut Ink and water into small containers (3A). Use a paint brush to watercolor the flowers centers, varying the intensity of the color by diluting the ink with water (3B). When done, wash and dry the containers

Steps 4A and 4B:
Spray Cherry Blossom and Lilac Walnut Inks into separate containers. Spray a small amount of Sparkle Sheer Shimmer Craft Spray into both containers and into a third container (4A). Use paint brushes to paint the circular elements of the stamped image with sparkly Walnut inks (4B).

Steps 5A and 5B:
Adhere the repositionable sticker masks from Step 1 atop the stamped and painted images. Smoosh Gold Sheer Shimmer Stix onto the craft mat (5A). Use a brush to apply over the masked images. Also use the applicator top to apply the shimmery gold ink directly to the image panel. Wipe the excess away with a paper towel (5B).

Steps 6A and 6B:
Repeat Steps 4A and 4B to add more shimmery walnut ink to the containers (6A). Load a paint brush with the ink then tap the paint brush to splatter the image panel (6B). Repeat with the second color. I wanted more splatter, so I loaded a clean toothbrush with ink and splattered the panel even more. (No photo). Remove the masks and heat set the panel.

Step 7:
Use the smaller die from the Frayed Frames Die Set 26 to cut the image panel. Use the larger die from the same set to cut black cardstock. Use Tear-It! Tape to mat the image panel die-cut with the black die-cut. (Sorry! No photo).

Step 8:
Place the matted image panel into a stamping platform. Position the “Flower” Sentiment from the Grunge Flowers Stamp Set 2 facedown on the bottom right of the image panel. Press the platform’s lid onto the back of the stamp and lift. Ink the stamp with Nocturne VersaFine Clair Ink and stamp. Re-ink and stamp again if necessary to attain a good impression.

Step 9:
Remove the impute panel from the platform and place onto paper. Sprinkle Clear MBoss powder onto the stamped sentiment. Dump the excess back into the container. Heat set the sentiment.

Step 10:
Create an A2 card from purple cardstock. Use Tear-It! Tape to adhere the image panel to the card.

Craft Supplies

Imagine:

Other:

Watercolor Paper by Canson
Raven and Purple Cardstock by Bazzill Basics
Crafty Grunge Flowers Stamp Set 2 by Melina Dahl for That’s Crafty
Frayed Frames Die Set 26 by AALL and Create
Repositionable Sticker Paper by Avery
Curved Craft Scissors by Fiskar’s
Heat Gun
Misti Stamping Platform by My Sweet Petunia
Big Shot by Sizzix

Make a Happy Spring Card

Posted on March 26, 2024 by Imagine

By Ceil Pritchett

Hello crafty friends, today I am sharing a spring card using a couple of blending techniques, one with Fabrico markers and one with the VersaMagic Dew Drops.
I was so happy for spring to finally arrive. I live in the mountains and even though it is officially spring, sometimes we still get snow in April.

Skill: Intermediate to Advanced
Time: 45 minutes to an hour

Directions:

Step 1
Place a piece of white cardstock in the corner of a stamping platform and use Nocturne VersaFine Clair to add ink to the stamp.

Step 2
Stamp the image on a post-it note or masking paper using Nocturne VersaFine Claire ink, then fussy cut out the image.

Step 3
Color the image using Fabrico markers. You can blend the colors using a piece of acetate as shown in the picture. The green marker I used is Emerald. I created a lighter green by scribbling some green on the piece of acetate and then picked it up with the yellow marker, creating a yellow green color. I also created a lighter orange by scribbling orange on the piece of acetate and then picking it up with the yellow marker. This doesn’t in any way contaminate your markers, all you do after you finish blending is scribble on a regular piece of paper until you get the true color back.

Step 4
Using the mask you created earlier, cover the daffodil image that you colored and then add the stencil over it. You will also need to mask off the top portion of your panel as well to keep it clean while you ink blend over the stencil. I used three different colors of VersaMagic Dew drops to give the bricks a more realistic look. They are listed below. I love how well the VersaMagic chalk inks blend together.

Step 5
Remove the stencil and mask from the panel and cut it down to 3.78 xX 4.78

Step 6
Insert a piece of black cardstock into the corner of a stamping platform and use an anti-static tool to prep surface. Stamp the sentiment using VersaMark ink and heat emboss it with MBoss White Embossing Powder, then cut it out with the coordinating die.

Stamp the sentiment “happy” directly on the card front and add the embossed sentiment below it.

Step 7
Assemble your card by adhering the front panel to a black panel cut to 3.75 X 5 using On Point Glue and then adhering it to a card base cut to 4.25 X 11, scored at 5.5

I hop you will give these techniques a try. Thank you for stopping by our blog today. Until the next time, stay crafty!

Supply List

Imagine Crafts:
VersaFine Clair – Nocturne
Fabrico Dual Marker -#112 Tangerine
Fabrico Dual Marker – #111 Lemon Yellow
Fabrico Dual Marker – #121 Emerald
VersaMagic Dew Drop – Red Magic
VersaMagic Dew Drop – Perfect Plumeria
VersaMagic Dew Drop – Jumbo Java
VersaMark Watermark Ink
MBoss White Embossing Powder
Sponge Daubers
On Point Glue

Other Products:
Daffodil Stamp Set + Dies – The Rabbit Hole Designs
Back Ally Stencil – The Rabbit Hole Designs
Teal Mini MISTI
Hero Arts Pitch Black Cardstock
Neenah Classic Solar White 120lb Cardstock – card base
Neenah Classic Solar White 80lb – Cardstock panel

Learn to Make a Textured Spring Card

Posted on April 4, 2023 by Imagine

By Martha Lucia Gomez

Hello there! Today’s tutorial is about texture with Fireworks and Embossing Powder! Do you know that you can create a splattered effect with the embossing powder? Let me share the project with you.

Skill: Beginning

Time: 60 minutes

Directions:

Step 1:

Take a selection of Fireworks! colors of your preference to create the first part of the splatter effect. First, spray a single color over your craft mat. Grab a piece of white smooth cardstock or any type of cardstock and press softly over the mat. Let the paper dry naturally or speed the process with the heat tool if you don’t want to wait a few minutes.

Repeat the above process with all the colors that you wanted to use on your background. In my sample, I used Potter’s Clay, Paris Dusk and Bamboo Leaves.

Step 2:

While the background is in drying process, you can work on the card base. Select a color of VersaFine Clair that coordinates with your background. Stamp lineal images over it. If you want, you can emboss it with clear embossing powder. In my sample, I used VersaFine Clair Shady Lane and don’t emboss de leaves.

Step 3:

In a separate piece of White Smooth Cardstock, I stamped a floral image with VersaFine Clair Glamorous and then covered it with Clear Embossing Powder. Additionally, with a tiny spoon or spatula, I sprinkle Gold Embossing Powder over the flowers and leaves, trying to keep the powder inside of the lines.

Step 4:

With a paint brush, I removed the excess of the powder around the borders of the flower and then, melted the powder with the heat tool.

As you may have noticed, to create the splattered effect, I didn’t use ink, just the powder.

Step 5:

To continue with the process, I resized the background layer in angle. Then, I die cut the floral image with a coordinated die. Additionally, I pasted all the pieces over the card base using crafty foam tape to add more

dimension to the card.

Step 6:

As final touch, stamp a sentiment in a different color and paste over the decorated card with crafty foam.

Thanks for stopping by and don’t forget that you can use different types of ink and embossing powders to create your own look!

Art Supplies:

Imagine:

Other:

Stamping Tool
Crafty Foam Tape.

Let’s Make Two Fun Plaid Backgrounds for Spring Cards

Posted on March 11, 2023 by Imagine

By Nancy May

Hey y’all. We are going to make two very different fun, bright Spring plaid backgrounds. One is very controlled, precise, and clean, stamped in VersaFine Clair inks with a fun color gradient; the other is much looser and more organic, hand painted with VersaColor inks for a more painterly look.

~Nancy

Skill: Beginner, Intermediate

Time: 30 -60 minutes

Art Supplies:

Imagine

• VersaFine Clair Ink Pad: Charming Pink, Cheerful, Summertime and Verdant

• VersaColor Dew Drop: Mango Madness, Pink Grapefruit, Red Magic and Tea Leaves

• Memento Ink Pad – Tuxedo Black

• Tear It! Tape

• Craft Mat

• On-Point Glue

Other

• Simon Says Stamp – clear Stamps – Spring Gnomes

• PinkFresh Studio – Cling Stamp – Diamond Plaid

• Creek Bank Creations – Dies – Stitched Rectangle

• Creek Bank Creations – Dies – Stitched Hearts

Birthday Greetings, A Kaleidacolor Project

Posted on May 31, 2021 by Imagine

By LeeAnn McKinney

HI there friends and fellow crafters, LeeAnn here with a fun inky project using Kaleidacolor Baby Powder Ink Pad, a Brayer and Gel Press. Sit back and relax as I make these 4 cards.