Tag Archives: stamping tutorial

Let’s Make a Coffee-Themed Card

Posted on by

By Anna Escalada York

– As a high school teacher, having cards with a snarky-edge ready to go for a coworker having a wild day is a must, and coffee-themed cards are great to have in your stash because they are always appreciated. So as I get ready to go back to school, I can tuck this away for someone who may need a smile.

Skill: Intermediate
Time: 2.0 hours

Directions:

Step 1:
Rub a Love Letter Memento ink pad onto a piece of watercolor paper. (The paper was a little rough, so additional color will be added later.)

Step 2:
After die cutting the colored watercolor paper, use a Poppy Red Fabrico marker to fix any areas that weren’t colored with the ink pad.Then spray the die cuts with Silver Sheer Shimmer Craft Spray.

(Later, a third die cut was made to better fit the card. This was made in the same way.)

Step 3:
Die cut a piece of watercolor paper with the second-largest die from an A2-sized background die set. Then spray Rose Gold Sheer Shimmer Craft Spray into a coffee-themed embossing folder and emboss the watercolor panel. Allow the spray to dry.

Step 4:
Ink blend the edges of the embossed watercolor background panel with Champagne Delicata ink using a sponge dauber.

Step 5:
Before gluing the die cuts, I pressed the center coffee cup into the Ruby Red Delicata ink pad to change the color of that cup just a little. Glue all three die cuts down and trim the edges with scissors.

Step 6:
Ink blend a piece of patterned paper with more of the Ruby Red Delicata ink using a sponge dauber.

Step 7:
Die cut the ink blended patterned paper with the largest die from the A2-sized background die set. Then press both Ruby Red and Bark Brown Shimmer Delicata ink onto acetate packaging and spraying with water and splatter both panels with the red and brown watercolor. Ater the splatter dries, glue the two panels together.

Step 8:
Stamp the sentiment with Glamorous VersaFine Clair ink and heat emboss with clear embossing powder.

Step 9:
Die the inside of the coffee cups (the coffee) out of watercolor paper with the same coffee cup die three times and then spray them all with Potter’s Clay Fireworks! Craft Spray.

Step 10:
Ink blend the edges of all three coffee dies with Dark Brown Shimmer Delicata ink with an ink dauber. Then glue the three small brown die cuts into the three coffee cups on the cardbase.

Step 11:
Press the edges of the sentiment into the Ruby Red Delicata ink pad and then heat emboss the edges with clear embossing powder. Then assemble the card by attaching the sentiment onto the lower right corner of the upper card panel with foam tape and glue sequins onto the card.

Finally, glue the whole thing onto an A2-sized white cardbase.

Art Supplies

Imagine
• Delicata ink – Champagne
• Delicata ink – Dark Brown Shimmer
• Delicata ink – Ruby Red
• Fabrico Dual Marker – Poppy Red
• Fireworks! Shimmery Craft Spray – Potter’s Clay
• Memento Ink – Love Letter
• Sheer Shimmer Craft Spray – Rose Gold
• Sheer Shimmer Craft Spray – Silver
• VersaFine Clair ink – Glamorous
• Sponge Daubers

Other
• Altenew – foam tape
• Catherine Pooler – sequin mix – Manhattan
• Pink and Main – die set – Notched Corners
• Riley and Company – die set – Coffee Heartbeat
• Sizzix – embossing folder – Coffee by Tim Holtz
• A2-sized white card base
• Clear Embossing Powder
• Watercolor paper
• Patterned paper
• Thin paint brush
• Die cutting machine
• Scissors
• Glue

“You’re the Coffee to my Morning” Card

Posted on by

By Katy Ingram

Hello Friends! Katy here with another quick project. I love trying new things with my inks and in this video I realized something great about using VersaFine Clair Inks with my BetterPress System and Shimmer Cardstock, you know the one that has a coating and is very smooth.

This particular cardstock is very hard to stamp with any kind of pigment ink because it never really dries. However; using the Betterpress System and pressing the ink into the paper it’s like it forces the ink to absorb. The best part, no smudging!

I personally don’t make coffee themed cards regularly, but I know others do and I hope this gives you some inspiration if you are a coffee card maker.

Video has all the details. Thanks for watching.

Skill: Advanced
Time: 15 minutes

Art Supplies

Imagine Products

• VersaFine Clair: Pinecone and Acorn
• Delicata Ink-Rose Gold

Other Products Used

• Affiliate links used at no additional cost to you. Thank you for your support
• Kat Scrappiness Coffee Background Die https://ldli.co/e/p34dnm6
• Altenew Gilded Marble Press Plate https://ldli.co/e/p34dnm6
• Double Sided Adhesive 1/2 inch https://amzn.to/4m9cKlc
• Rose Gold Pearl Cardstock https://ldli.co/e/p34dnm6
• Letterpress Paper https://ldli.co/e/p34dnm6
• Betterpress System https://ldli.co/e/p34dnm6

“All I Need Today” Coffee Card

Posted on by

By Ceal Pritchett

Hello friends!
It’s Ceal, here. Today I am sharing a coffee card. This totally looks like me on a Monday morning.

Skill: Beginner
Time: 30 minutes

Directions:

Gather your supplies. You will need a coffee stamp, a sentiment set,  markers, dark brown ink and a stencil for the background.

Step 1:
Stamp the image and color it in with markers. I used Toffee Crunch and Desert Sand for her hair, Angel Pink and Lilac Posies for her outfit, Summery Sky for the coffee cup and Gray Flannel for the kitty.

Step 2:
Cut the panel down and add sentiment.

Step 3:
Cut a panel of Kraft cardstock to A2 size and use a dark brown (I used Fallen Leaves) to color in the stencil for the background. Add the background panel and the image panel to the card base. 

Supplies:

Imagine Supplies:
• Memento Markers
– Gray Flannel, Toffee Crunch, Desert Sand, Summer Sky, Angel Pink and Lilac Posies
• VersaFine Clair – Nocturne
• VersaFine Clair – Fallen Leaves
• On Point Glue

Other supplies:
• Coffee is not Enough Stamp Set – Unity Stamp Co
• Coffee Create Repeat Stamp set – Taylored Expressions
• Coffee Bean Flower Stencil – Ink On 3
• Rectangle dies – Hero Arts
• Grip mat – Simon Says Stamp

Stamp with Memento Luxe Create Custom Backgrounds 

Posted on by

By Jessica Lin

Skill: Beginner
Time: 30 min

Hi everyone! It’s Jessica here. Today I have a simple coffee card to share with you. I like to include die-cutting and embossing in a lot of my projects, but I thought today I would focus on the basics – stamping with just ink and paper.

Step 1:
Stamp the coffee stamps using Brilliance Coffee Bean and VersaFine Clair Warm Breeze ink pads. The stamp set I am using today is from Stampin Up’s Latte Love set, but you can use whatever coffee stamps you may have.

Step 2:
To create a simple, patterned background, try stamping the same image at various angles using Memento Luxe Wedding Dress ink pad. For a more subtle, tone-on-tone look, you could use VersaMark ink pad instead. These two ink pads are my favorite for stamping background patterns.

Step 3:
For the sentiment, I decided to use VersaFine Clair Pinecone since the VersaFine Clair ink pads are great at capturing fine details in sentiment stamps. I also fussy cut around the stamped image.

Step 4:
I added a bow using some twine I saved from previous gift packaging, and adhered both the sentiment and the latte images with foam tape. And that completes today’s coffee card! Thanks so much for stopping by, and I’ll see you in my next tutorial!

Imagine Supplies:

Other Supplies:

  • Stampin’ Up! – Stamps – Latte Love
  • Stampin’ Up! – Paper – Chocolate Chip cardstock
  • Foam Tape

Ink-Painted Sunflower Card using Brushstix

Posted on by

By Tracy Fear

Hello Friends! Tracy here and today I am delighted to share this tutorial about how to color with your inks and using Brushstix to get into those tiny places!

Tracy

Skill: Intermediate
Time: 30 Minutes to 90 Minutes

Art Supplies

• Stamping Platform
• Glue
• Paint Brush
• White Paint
• Gold Splatter Paint
• Scene Stamp
• Small Blending Brushes

Imagine Products
• VersaFine Clair in Acorn
• Versamark Ink
• Memento Inks
– Tangelo
– Morocco
– Potter’s Clay
– Rubarb Stalk

• Versa Magic Inks
– Hint of Pesto
-Mango Madness
-Tea Leaves
-Jumbo Java
-Sea Breeze

• BrushStix

Other Products Used
• Sunflower Stamp from Blue Knight Rubber Stamps
• 120lb paper in white
• Misti tool
• PVA Adhesive 

ALTERNATIVE PRODUCTS THAT CAN BE USED TO RECREATE SOMETHING SIMILAR
Any Inks

Let’s Make a Welcome Card for a Teacher

Posted on by

By Anna Escalada York

As a veteran teacher in a local high school, I was excited to make a welcome card for the new culinary teacher at my high school. I decided that since I was making the card specifically for them, I would personalize it– using maroon (or as close as I could with the colors in my stash) and gray as the color scheme of the card as our school colors and use a cute new to me charcuterie-themed stamp set.

Skill: Intermediate
Time: 1.0 hour

Directions:

Step 1:
Stamp the large charcuterie stamp onto a piece of watercolor paper with Nocturne VersaFine Clair ink and heat emboss with clear embossing powder.

Step 2:
After die cutting the colored watercolor paper with the second-largest die from an A2-sized background die set, press the Midnight Black VersaMagic ink pad onto a piece of acetate packaging and then sprayed the ink with Frost Sheer Shimmer Craft Spray. Then press the acetate onto the watercolor panel. After everything dried, ink blend the edges of the panel with more of the Midnight Black VersaMagic ink using a sponge dauber.

Step 3:
Press the Rhubarb Stalk Memento ink pad onto the edges of a watercolor panel.

Step 4:
Die cut the panel with the largest die from the A2-sized background die set. Then press the Rhubarb Stalk Memento Ink pad onto another piece of acetate packaging and spray the acetate with more of the Frost Sheer Shimmer Craft Spray and then watercolor smooshed the Rhubarb Stalk-colored panel. Allow to dry.

Step 5:
Press more Rhubarb Stalk Memento Ink pad onto acetate packaging and spray the acetate with more of the Frost Sheer Shimmer Craft Spray and then watercolor smoosh the stamped gray and white charcuterie board stamped panel to add a hint of color to the card. Allow to dry.

Step 6:
Press Rhubarb Stalk Memento ink pad onto a small scrap of watercolor paper. Make sure the paper is fully colored. After the ink has dried, die cut the watercolor paper with the sentiment die. While die cutting, die cut two additional scraps of cardstock to create a-three layered die cut for dimension.

Step 7:
Assemble the card. Glue the two panels together. Then glue the three layers of the sentiment together and glue to the center of the card. Attach clear enamel dots onto the card (while they are hard to see on the photo, there are three on the lower left corner of the gray panel, and two on the upper right panel). Then glue everything onto an A2-sized white cardbase.

Art Supplies

Imagine
Memento Ink – Rhubarb Stalk
Sheer Shimmer Craft Spray – Frost
VersaFine Clair Ink – Nocturne
VersaMagic Ink – Midnight Black
Sponge Dauber

Other
Altenew – enamel dots –
Crystal Clear Enamel Dots
Colorado Craft Company – stamp set –
Charcuterie Board
Pink and Main – die set –
Notched Corners
Welcome sentiment die
Clear Embossing Powder
Watercolor paper
Die cutting machine
Glue