Hello friends and fellow crafters, LeeAnn here with a treat bag for Valentine’s Day that I created using vellum, cardstock, a stamp, a couple dies and some eat embossing.
Good morning! I have a new tutorial for you using the beautiful Silver Metallic Creative Medium. It is the perfect medium to add dimension to your cards, scrapbooks, journals or any paper craft! Today I am creating a Valentine’s Day card for you so let’s get started!
Skill Level: Medium
Time to Complete: 1.5 hour
Directions:
Step 1
Cut, score and fold a piece of red card stock to create an A2 top-folding card base. Die-cut a piece of white card stock using the scalloped rectangle from the Gina K Design’s Master Layout 4 die set. Cut a piece of black card stock to roughly 4.25” x 5.5”
Step 2
Tape your stencil to the black card panel. Using and Imagine Crafts Spatula and the Silver Metallic Creative Medium, swipe the medium over the entire panel. Remove and clean your stencil and allow panel to dry. Once dry cut the panel to 3 3/8” x 4.5”.
Step 3
Using the Lacy Layered Heart Die from Kat Scrappiness cut 2 white hearts, 1 red and use the solid heart die to cut a heart from black card stock. Now we will emboss one of the white hearts. Cover the heart with VersaMark watermark ink and then sprinkle with your choice of embossing powder. I used WOW Antique Silver Powder. After heat embossing I glued the two white panels together with On Point. The using Imagine Craft Mixed Media Brush I blended some Versafine Clair Nocturne Ink around the edges. Then offset the red heart and glue it on. This was then glued to the center of the black, solid heart.
Step 4
From the same red card stock cut three of the word LOVE from the Kat Scrappiness I Love You Sentiment w/Shadow. I cut the shadow from vellum. I spritzed the word LOVE with Sheer Shimmer Craft Spray in Silver. Cut the I and the YOU from black card stock and the shadows from white. Glue these together.
Step 5
I also cut a few hearts using the die from Concord & 9th’s Sweet Summer die set and the red card stock. I covered them with Glossy Accents and used them as embellishments. For assembly I glued the main heart towards the top of the stenciled panel. the words were glued directly to the heart. For any of the sentiment that hung over the edge, I added a small piece of foam tape. Foam tape was added to the entire panel and then adhered to the red card base.
Thank you so much for stopping by and checking out this tutorial. I hope you have an amazing crafty day and a wonderful Valentine’s Day!
Hello there! Today’s tutorial is about texture without dimensions. Do you know that you can create a flat card with these two ingredients and just one type of ink? Well, the Delicata is the ink that can bring you these possibilities and more. I decided to make this card using two colors of Delicata, Ruby Red and Rose Gold.
Skill: Beginning
Time: 45 minutes
Directions:
Step 1:
Take a piece of white smooth cardstock and solid stamps to create your design. In my sample, I am using hearts in different sizes and the Love Sentiment. First, ink the sentiment using the Ruby Red Delicata Ink. The Delicata is a pigment ink that dries within minutes on porous papers and never loses the luster. You can also obtain a Metallic touch with it if you don’t emboss the stamped images.
Step 2:
If you want to obtain more texture and coverage, you can stamp the same image several times. In my sample, I stamped it three times.
Step 3:
To complete the sentiment, you can stamp a complement using the same ink or other ink. On this sample, I used VersaFine Clair Nocturne. On it, you can notice the different textures of both inks and the soft color of the Delicata.
Step 4:
Now is the time to create more texture. This time, I used Rose Gold Delicata Ink to create it and hearts in different sizes. I stamped them randomly on the upper part of the card. Using a stamping tool, you can create different tones with the same ink and color, depending of the times that you stamp your image.
Step 5:
After finalizing the stamping process, I decided to embellish the card with a few loops of red twine. I used a dot of On Point Glue to secure just the knot.
Step 6:
Due to the dimension created with the twine, I pasted the decorated layer over a red card base using crafty foam tape. And voila, my soft and textured Valentine’s Card is ready!
Thanks for stopping by and don’t forget that you can explore more textures with other colors of Delicata Ink.
Hello Friends! Katy here and today I am using a variety of products to create this Love You card.
In today’s video tutorial I do some ink blending with VersaFine Clair Verdant and Warm Breeze. I haven’t used these two colors for ink blending before and they blended really well and the colors coordinate perfectly together. I used a heart stencil with VersaFine Clair Paradise to blend over the ink blended panel and then added some Sheer Shimmer Stix in Frost for a bit of shimmer. I also pulled out some irRESISTible Spray in Paris Dusk and Silver to create some splatter. I finished the panel off by die cutting the words love and you with some metallic blue cardstock. Check out the video to see the process in action. I hope you enjoy and thanks for stopping by.
Hello! Kathy here, creating art for Imagine Crafts! Today’s project is a treat/gift card holder for Valentine’s Day but it is also about ADHESIVES! Adhesives aren’t the focus on most tutorials so let’s change that today.
.Skill Level: Easy
Time to complete: 1 Hour
Directions:
Step 1
Cut 3 pieces of a layering weight, white card stock to 4” x 11”. This will be enough for three holders. You don’t need a heavy weight card stock as we will be scoring, folding and adding a layer of patterned paper.
Step 2
Cut 3 panels of patterned paper to 3.5” x 10.5”. I had this fabulous patterned paper from Kat Scrappiness in my stash which is perfect for Valentine’s Day!
Step 3
Here is where the adhesive comes in! You will attach the patterned paper panels to the white card stock. The Tear It! Tape from Imagine Crafts is SO easy to use. It is a strong double-sided adhesive AND you don’t need to reach for your scissors every time you want a piece. Just tear it! It tears so easy! We will also be using the On Point Glue and I will give you a tip in a second. The On Point Glue comes in a small bottle with a micro tip. The cap of the bottle has a built in pin that fits in the micro tip when you close the cap so it never gets clogged! No more losing those pins!
Step 4
Add your Tear It! Tape to the back of all four panels on all sides. Here’s a tip, pull up only a bit of each back and a bit of On Point Glue to the exposed area. Then flip the panel over and align to your white card panel. This allows some wiggle room for you to align the panels perfectly! Once the patterned panel is aligned press down the areas of exposed adhesive and then gently pull the backing paper off from each side.
Step 5
Now it’s time to score and fold. You will score as indicated above and fold in the manner shown.
Step 6
Now it’s time to add a little decoration! I used a heart die and coordinating stamps. I stamped using VersaColor Cardinal ink. For the sentiment I used VersaFine Clair Nocturne Ink. Foam tape was added to the lower half of the heart. The reason for this is so the flap of the holder can tuck under the heart. I also added foam tape to the sentiment, adding a bit more dimension to the design. These were SO easy to create and you could change up the design for ANY occasion. I haven’t put anything inside yet. A gift card fit perfectly inside, just add some temporary adhesive to the back of the gift card. You can also adhere a small cellophane bag filled with small treats and adhere it or add a bit of temporary adhesive to the back of a fun-size candy bar! Perfect for Valentine’s Day and Halloween!
I hope you enjoy this card and the tutorial. Thanks for stopping by I appreciate all of you! Please head over to the Imagine Crafts website to see all the beautiful products. Here is the link IMAGINE CRAFTS.
Imagine Blog 