Hey everybody! It’s Ceal, here. Today I am sharing a card using a technique that I am calling “faux watercolor” because the end result look like it was water colored to me.
Skill: Beginner Time: 30 minutes
Directions:
Start by gathering your supplies. You will need a A2 card base, a white panel, a panel of tidepool cardstock, several colors of VersaMagic ink, VersaFine Clair Pinecone ink, Memento Tangelo ink, sponge daubers and an embossing folder.
Step 1: Make a dry run of the embossing folder through the die cutting machine.
Step 2: This looks like a hot mess, but I promise it gets better. Using a sponge dauber, color the leaves as desired using VersaMagic inks.
Step 3: Lock the embossed panel back into the folder and generously ink up the debossed side with a dark brown ink. Close the folder and run it through the die cutting machine.
Step 4: Glue the panel down on the card base and add a sentiment. I used a happy birthday die cut.
It’s summer and the roses are in full bloom. Let’s make a Rose Postage Card with VersaMagic and Delicata Inks!
Skill Level: Intermediate Time: 1.5 hours
Directions:
Step 1: Use the Postage Collage die to cut Desert Storm cardstock.
Steps 2A and 2B: Place a magnetic panel onto the cardstock panel. Use temporary adhesive to secure the Rose Postage Collage die-cut to a piece of scrap paper. Use magnets and low-tack tape to secure the first Rose Postage Collage Stencil to the die-cut. Use a Sponge Dauber to apply Pink Grapefruit VersaMagic Ink over the stencil onto the die-cut (2A). Use another Sponge Dauber to apply Mango Madness VersaMagic Ink over the stencil onto the die-cut, blending the ink as you go (2B).
Keep the Postage-Collage Die-cut panel in place. Remove the stencil and clean. Heat set the collage panel.
Steps 3A and 3B: Use magnets and low-tack tape to secure the second Rose Postage Collage Stencil to the Postage Collage die-cut. Use a Sponge Dauber to apply Tea Leaves VersaMagic Ink over the stencil onto the die-cut (3A). Use another Sponge Dauber to apply Aloe Vera VersaMagic Ink over the stencil onto the die-cut, blending the ink as you go (3B). Keep the Postage-Collage Die-cut panel in place. Remove the stencil and clean. Heat set the collage panel.
Steps 4A & 4B: Move the Postage Collage Die-cut panel to the base of a stamping platform. Secure with magnets. Position the postmark, cancellation, cost, and “forever” stamps from the Postage Collage Stamp Set facedown on the panel. Press the platform’s lid onto the back of the stamp, lift, ink the stamps with Morning Mist VersaFine Clair Ink, and stamp (4A). I re-inked and stamped some of the stamps with Nocturne VersaFine Clair Ink to add visual weight.
I decided that I wanted to add the words “With Love” from the second Postage Collage Stencil and that I wanted to add more stamped postage items to the collage.
Step 5: Move the Rose Postage Collage Die-cut back onto the magnet panel and secure the second Postage Collage Stencil with magnets and low-tack tape overtop. Re-use the Sponge Dauber from Step 2A to apply Pink Grapefruit VersaMagic Ink over the “With Love” words on the stencil onto the Postage Collage Die-cut panel. When done, lift the stencil, clean it, then heat set the Postage Collage Die-cut panel.
Step 6: Place the Postage Collage Die-cut Panel again onto the base of a stamping platform and secure it with magnets. Place additional postage stamps from Postage Collage Stamp set facedown on the image panel. Press the platform’s lid onto the back of the stamp, lift, ink the stamps with Morning Mist VersaFine Clair Ink, and stamp. When done, remove the Postage Collage Die-cut Panel and heat set.
Step 7: Move the Rose Postage Collage Die-cut panel back to the large magnet panel. Use magnets and low-tack tape to secure the third Postage Collage Stencil to the Postage Collage Die-cut panel. Use a Sponge Dauber to apply Golden Glitz Delicata Ink over the stencil onto the Postage Collage Die-cut panel.
Step 8: Use the pouncy tool to apply Golden Glitz Delicata Ink randomly over the Postage Collage Die-cut panel. Heat set the panel and set it aside.
Steps 9A and 9B: Cut a piece of Desert Storm cardstock to 5.5” x 4.25”. Use temporary adhesive to secure this panel to a piece of scrap paper. Use magnets and low-tack tape to secure the first Postage Collage Stencil to the die-cut. Use a Sponge Dauber to apply Pink Grapefruit VersaMagic Ink over the stencil onto the die-cut (9A). Remove the first stencil and heat set the panel.
Use magnets and low-tack tape to secure the second Postage Collage Stencil to the panel. Use a Sponge Dauber to apply Mango Madness VersaMagic Ink over the stencil onto the die-cut (9B). Remove the stencil and heat set the panel.
Step 10: Use the pouncy tool to apply Golden Glitz Delicata Ink all over the panel. Heat set.
Step 11: Use Tear-It! Tape to adhere the Postage Collage Die-cut panel to the 5.5” x 4.25” panel, then use to adhere the panel to an A2 card cut from the same cardstock.
Hi everyone! Summer is finally here and I’m so excited for the sunny weather! What reminds you of summer? I think of pools, ice cream and acai bowls, which is the inspiration for today’s card. Most of my creations are more advanced with lots of tools and techniques, but I thought today I would do a simple card with just stamps and inks.
Skill: Beginner Time: 30 minutes
Directions:
Step 1: I’m using two stamp sets today: Sweet Strawberry and Berry Blessings. I stamped the fruit outline images with VersaFine Clair ink in Nocturne. This is my favorite black ink! Today’s card is a smaller notecard style so I’m stamping on a 6’’ x 6’’ square piece cardstock. I am also trying out a new rotating stamping technique on the We R stamp platform. This is such a fun tool to use to create your own patterned backgrounds. I placed the stamps within the 3’’ x 3’’ grid and rotated the plate 4 times with 90 degrees each time. If you don’t have this particular stamping tool, you could stamp the outlines freehand as well.
Step 2: I then stamped the layering images with these VersaFine Clair inks. I love the bright, bold colors, especially for a summertime themed card.
Step 3: To keep the sentiment simple, I used StazOn Pigment ink in Snowflake and stamped it on black cardstock. For a more vibrant look, you could heat emboss with white embossing powder. But the StazOn Pigment ink is a great alternative for beginners with just inks and stamps in their stash. I adhered some sequins with On Point glue as some finishing touches, and a simple summer notecard is complete! Thanks so much for stopping by and I hope you enjoyed this quick project.
In today’s post, I am sharing a fun, summer card that features some bold colors!
Skill: Intermediate Time: 1 hour
Directions:
Step 1 Color a piece of acetate packaging with both Cottage Ivy Memento marker and Emerald Fabrico marker and then spraying the acetate with water. Press the acetate onto a piece of watercolor paper multiple times, moving the acetate around so add green color around the watercolor paper. Allow the water to dry.
Step 2 Die cut the watercolor smooshed paper with a circular die cut. Add a small dot of Pink Ultimate Pigment Pigment Refill into the raised areas of an embossing powder, and then spray the embossing folder with Sparkle Sheer Shimmer Craft Spray to both help the watercolor paper stay moist (so it won’t tear) while embossing, and to help dilute the condensed pink refill ink. Then sandwich the watercolor paper into the embossing powder and run it through a die cutting machine. After the watercolor paper has dried, ink blend the edge of the circular die cut with Pink VersaColor pigment ink.
Step 3 Die cut another piece of watercolor paper with a slightly larger circular die. Directly press the Pink VersaColor Pigment ink pad onto the watercolor paper. Optional step: Heat emboss the ink with clear embossing powder.
Step 4 (and 4.5) Stamp an image onto watercolor paper with a nature scene with Nocturne VersaFine Clair ink. Heat emboss with clear embossing powder. Using a variety of media to watercolor the image: Celestial Copper Delicata Ink pad mixed with water to color the rocks, Emerald Fabrico marker mixed with water to color the frog and leaves, Bahama Blue Fireworks! Spray to color the sky and water, and Pink Ultimate Pigment Ink Refill to color the flower petals. Finally, color the centers of the flowers with a Dandelion Memento marker.
Step 5 Watercolor smoosh some of the leftover inks from the last step to watercolor smoosh a piece of watercolor paper and then spray the whole thing with Sparkle Sheer Shimmer Craft Spray. Use some additional color to stamp a text stamp in my stash to add a little interest onto the panel by pressing the stamp into the acetate instead of an ink pad. Repeat the process a few times until you like the amount of extra interest that is added. After everything dried, die cut the watercolor panel.
Step 6 Glue the two circular die cuts (the embossed panel and the larger pink die cut circle) and then glue it onto the watercolor background panel. After the glue dried, the whole thing was die cut again to trim the circular die cuts. The edges were ink blended with more Pink VersaColor Pigment ink. Splatters of the remaining Bahama Blue Fireworks! Spray from the acetate packaging were added to the panel as well.
Step 7 Stamp a sentiment with Nocturne VersaFine Clair ink.
Optional step: Heat emboss with clear embossing powder.
Step 8: Die cut sparkly white paper with a slightly larger rectangular die. Glue the main (frog) stamped and die cut image onto the top panel, glue the matte (sparkly larger panel) behind the top panel and then glue everything onto an A2-sized white card base. Glue sequins to the card base.
It’s summer, which makes me want to go to the beach to cool off in the ocean and pretend I’m a mermaid. Let’s make a card that fulfills those dreams using inks, stencils, and stamps!
Skill Level: Intermediate Time: 1.5 hours
Instructions:
Step 1: Use a craft knife to cut a piece of Low-tack tape in a curved pattern. Place the tape at the bottom of a 5.5” x 8.5” piece of white cardstock (no photo).
Lightly apply Bahama Blue Memento Ink to the white area of the cardstock.
Steps 2A & B: Place a magnetic page onto the craft mat. Use low-tack tape to secure the cardstock panel to the magnetic page. Use magnets and low-tack tape to secure the Currents Stencil to the cardstock panel. Use a Sponge Dauber to apply the lightest blue ink from the Kaleidacolor Blue Breeze Ink pad over the stencil onto the cardstock panel (2A). Randomly apply Teal Zeal Memento Ink over the stencil onto the cardstock to deepen the colors.
Step 3: Remove the stencil, then spritz the panel with 91% Isopropyl Alcohol to blend the inks and add white splatters and splotches.
Step 4: Remove the low-tack tape and replace with the negative part of the tape cut in Step 1. Sponge Desert Sand Memento Ink over the tape onto the image panel to create the sea floor. Remove the tape.
Step 5: Place the panel onto the base of a stamping platform and secure with magnets. Position the mermaid stamp from the Guinevere Clear Polymer Stamp Set so that it’s face down along the lower right side of the image panel. Press the platform’s lid onto the back of the stamp, lift, and ink the stamp with Nocturne VersaFine Clair Ink. Stamp. Re-ink and stamp again if necessary to attain a good impression.
Remove the panel and thoroughly heat set the ink.
Step 6: Use Copic markers to color the mermaid’s rocky throne. Usually I don’t use Copic markers with any ink other than Memento, but since I had duplicate markers, I gave it a shot and it worked! Sorry! No photos!
Step 7: Use Triplus pens to color the mermaid’s hair. Use Marine and Black Stardust Glitter Gel Pens to add detail the mermaid’s scales. The ink of both pens work well with most inks. Sorry! No photos again!
Steps 8A & B: Place the image panel back onto the base of the stamping platform and secure with magnets. Use low-tack tape to cover the top of the ocean floor to the left of the mermaid.
Position the mid-sized Skeleton Tree stamp from the Skeleton Tree Clear Stamp Set facedown on the top left. Press the lid of the platform onto the back of the stamp and lift. Ink the stamp with Summertime VersaFine Clair Ink and stamp (8A). Remove the tape.
Remove, clean and dry the stamp. Reposition the mid-sized Skeleton Tree stamp so that it’s facedown on the bottom left of the image panel. Position the smallest Skeleton Tree Stamp from the facedown on the bottom right of the image panel
Press the lid into the back of the stamps and lift. Ink both stamps with Summertime VersaFine Clair Ink and stamp (8B). Remove the stamps from the platform.
Step 9: Position the bubbles stamp from the Faerie Clear Polymer Stamp Set facedown on the image panel slightly above the mermaid’s outstretched hand. Press the lid into the back of the stamps and lift. Ink the stamp with Morning Mist VersaFine Clair Ink and stamp. Remove the panel from the platform. Heat set the panel.
Step 10: Place the image panel back onto the magnetic page. Use magnets and low-tack tape to secure the Sunshine Small Stencil over the image panel as shown. Sponge White Shimmer Delicata Ink over the stencil onto the image panel. Remove the panel and heat set.
Step 11: Use Tear-It! Tape to adhere the image panel to a black A2 card.
Today I am sharing a card that uses VersaFine Clair inks to create a dramatic sunset. You will need to gather the following supplies to recreate this card. I have them pictured below.
Skill: Advanced Time: 1 to 1 ½ hours
Directions:
Step 1: Cut the window die out of black cardstock.
Step 2: Using the large stamp in the layering stamp set, place it near the bottom of the panel and ink one third of the top portion with Cheerful ink. Next ink the middle portion with Pink VersaColor. The bottom portion should be inked with Charming Pink and Glamorous. The very edge of the stamp should be inked with Purple Delight. I also used a dauber to add purple delight to the bottom of the panel and later went over that with a Copic marker.
The next layer adds more definition to the sea. I inked it up with Pink VersaColor which turns orange when stamped over yellow.
The last layer is to stamp the reflection which I stamped in Cheerful (yellow) ink.
Step 3: I used a post it note to mask off the bottom portion so I could create the sky. To do this I used a dauber and blended Warm Breeze and Paradise ink and then added a little of the Fantasia ink to the top portion. I placed the panel back in the Misti and stamped the sky using Warm Breeze on the bottom portion of the stamp, Paradise in the middle and Fantasia on the very edge.
Step 4: Cut out a circle for the sun and ink blend Cheerful at the top, Charming Pink in the middle and Glamorous at the very bottom.
Step 5: Cut the panel into two pieces in order to layer them on an A2 panel.
Step 6: Adhere the sky panel to the top of the white A2 panel, add the sun and then add the sea panel so you overlap the sun and sky just a bit. You can see the white portion left in the photo above.
Step 7: Stamp a sentiment with VersaMark ink and emboss with white Mboss powder and then cut it out with the coordinating die and add to the front of the card.
Other Products • Neenah Solar White 110lb and 80lb cardstock • Pitch Black cardstock – Hero Arts • Color Layering Sunset Over Waves Bundle – Hero Arts • Tropical Foliage Window – Hero Arts
Imagine Blog 