How to Draw the Eiffel Tower in Paris with Washi Tape

by Jennifer Vanderbeek

How to Draw the Eiffel Tower in Paris with Washi Tape

Whether you are able to travel this summer or are staying home, you can create this fun canvas commemorating one of the world’s most recognized landmarks –The Eiffel Tower in Paris, France. After altering our canvas with tissue and Creative Medium, we’ll mask out or elements with washi tape and add layers of Delicata for a burnished patina. Once you’ve got the hang of it, try out more famous places that you’ve visited or only dreamed about.

Supplies

Imagine
Other
  • 10 x 10 Canvas
  • Tissue Paper
  • Paint Brush
  • Plastic Cup
  • Washi Tape in 3 widths

Create a High Contrast Card with Gold Embossing

by Martha Lucia Gomez

Create a High Contrast Card with Gold Embossing

The color challenge for July is Golden Glow and I immediately thought of Gold Embossing! I was so excited because I love Clean and Simple cards and I think using gold as your main color allows for a clean and simple design that is still sure to wow the recipient. While my card is in the style of CAS it is a bit of an advanced technique as it actually has three layers of paper! If you are looking for a beautiful design to create for a special occasion this White and Gold theme is an elegant combination. Enjoy!

Skill: Advanced
Time: 1 hour

Directions


Step 1

With masking tape create a border on the bottom of your card base. The width of the border depends on the size of the die cut letters that you want to use. In my project, I created a 1 inch border because the size of my die cuts is Jumbo. Ink the masked area directly with the VersaMark Inkpad. Cover the inked area with Gold Embossing Powder and melt the powder with the heat tool.


Step 2

Set the card base aside. Use large die letters to cut the letters “H” and “I” for the greeting. Align the letters over the card border and mask the lower portion with masking tape to match the card base border. (I used the same piece of masking tape for step one and two.)


Step 3

Cut a piece of whisper white cardstock to match the same area that is still white on the card base. In my sample, the card is a standard size, so my top layering piece is 5.5″ x 3.25″. Leaving the masking tape attached to the front side, apply On Point Glue on the back of the letters, above the masked area only. Paste the letters onto the separate layer aligning the masked area to the lower edge of your cardstock layer.


Step 4

Stamp a floral image on the left corner of the top cardstock piece with VersaMark and emboss with Gold Embossing Powder. Add a fun foam white layer behind the decorated layer and tape over the card base aligning the gold borders.

 

Supplies

Imagine
Other
  • Masking Tape
  • Altenew – Persian Motifs Stamp Set
  • Stampin’ Up – Large Letters Framelits
  • Big Shot Die Cutting Machine
  • Heat tool
  • Cardstock – White
  • MISTI Stamping Tool, Stamparatus or acrylic block

Learn How to Craft Your Own Dominos Pieces

by Kyriakos Pachadiroglou

Learn How to Craft Your Own Dominos Pieces

Today’s tutorial is a great summer fun project with a dominos game that can be played by everyone in the family. Having a lot of spare canvas wooden wedges, I decided it was time to alter them in domino pieces, a bit different from the usual ones, giving a distinct way when lining them while playing. Colored with bright Fireworks colors that give a fun summer mood and make them easy to spot when you are at the beach playing on the sand. The dots on domino pieces are made with Radiant Neon Amplify colors and heat set to add volume. A quick and easy fabric pouch colored with Fireworks keeps them safe and easy to take them with you.

Skill: Beginner
Time: 1 hour (40 min without sanding)

Directions


Step 1

Sand the canvas wooden wedges on a piece of sandpaper. This is an optional step as it will make the surface smoother.


Step 2

Color 10 wooden wedges with the Fireworks Bahama Blue color on all sides.


Step 3

Continue by coloring the rest of wooden wedges, split in half, with the Fireworks! Shimmery Craft Spray in Danube Blue and Lilac Posies colors. Let them dry well.


Step 4

Use the Radiant Neon Amplify in White and Electric Yellow colors to make the dots of the numbers on the wedges on half of the wedge. Every number from 0 (blank, no dot) to 6 needs to have a piece with these numbers placed on the other half. If it is a blank half with one dot on the other half, a blank half with two dots and so on. Make sure that you don’t repeat the same piece as you move on to numbers when you to start marking the 1 number (one dot) you will already have the piece with the blank or zero made. Please google “dominos pieces” for a visual guide if you need additional help.


Step 5

When finished, use your heat tool to make Radiant Neon Amplify puff.


Step 6

Cut a 12 x 14 inch piece of white cotton fabric and using an A4 page to cover a part of it, spray with Fireworks Bahama Blue. Move the page further, use the second one to cover the colored part and spray with the Fireworks in Lilac Posies. Finish with the Fireworks in Danube Blue covering the remaining fabric. Let it dry well.


Step 7

Hand sew sides to make the pouch. Use some satin ribbon to tie it.

Supplies

Imagine
Other
  • Canvas wooden wedges (28 pieces)
  • Sandpaper
  • Cotton fabric
  • Heat tool
  • A4 pages
  • Satin ribbon

Imagine Tips & Tricks: Use Masking Tape to Ink Letters

by Melissa Andrew

Imagine Tips & Tricks: Use Masking Tape to Ink Letters

When you are in the middle of a craft project that requires inking small die-cut pieces it can get messy! Today is a simple trick on how to keep those fingers clean when using your favorite Tsukineko Inks and masking tape!

Supplies

Imagine
Other
  • Low Adhesive Tape – Masking Tape
  • Alphabet die
  • Die Cut Machine

Color of Month for July is Golden Glow

Color of Month for July is Golden Glow

The Color of the Month for July is Golden Glow. We love gold and with summer in full gear, the golden glow of the summer sun shines down on all of us! We are reminded of golden fields of wheat, fun in the sun, vacations and wedding parties. With cardmaking and scrapbooking gold is an essential element to any crafter’s toolkit. Imagine and Tsukineko offers several products to help achieve the metallic shimmery shine such as Delicata in Golden Glitz, All-Purpose Ink in Vegas Gold, and don’t forget a Brilliance DewDrop in Galaxy Gold! In the meantime, we have a couple of sneak peeks of this months beautiful golden glow tutorials for you!

 

Here is a sneak peek of what we have in store for July!

Keep your eye out for this fun cardmaking tutorial by Jowilna Nolte

Such fun techniques to learn from this upcoming tutorial by Kyriakos Pachadiroglou

 

Product Recommendations for Gold

Delicata Inkpad – Golden Glitz

All-Purpose Ink – Vegas Gold

StazOn Studio Glaze – Gold

Brilliance DewDrop – Galaxy Gold

 

Use a Masking Technique to Make this Fabulous Card

by Elina Stromberg

Masking is one of my favorite stamping techniques for cardmaking. It’s a simple way to create a dimensional look and feel, without having to layer and collage fussy cut images. For this technique you don’t need any special supplies; a stamp set, stamping ink, a few sticky notes, and your scissors will be enough!

Skill: Beginner
Time: 30 minutes – 1 hour

Directions


Step 1

Stamp the hot air balloon and clouds on sticky note pages. If the sticky part is only on a portion of the page, make sure to place your stamping close to the paper’s sticky border. Cut out the images.


Step 2

Stamp the images you want to appear in front on your cardstock and place the fussy cut mask on top, then stamp the second layer. Use Memento in Tuxedo Black for stamping hot air balloons, and Memento in Summer Sky for the clouds. Leave the masks in place.


Step 3

Color the background using two shades of Memento, Summer Sky and Danube Blue, and a jumbo dauber. Sponge on a hint of white acrylic paint on the inked surface. Remove masks.


Step 4

Color the front mages with alcohol markers. Stamp sentiment text and the flying birds with black StazOn.


Step 5

Die-cut a tree-line from dark blue cardstock. Glue it on the bottom of the card. Trim card to size, mat on a piece of dark blue cardstock. Attach to white card base using double-sided tape.

Supplies

Imagine
Other
  • Joy Clair Stamp – ‘Fly With Me’ stamp set
  • Sticky Notes
  • Scissors
  • Sizzix – ‘Tree Line’ die
  • White acrylic paint
  • Alcohol markers
  • Double-sided Tape
  • Cardstock – dark blue, white
  • Card base – White