Design a Clean and Simple Happy Thanksgiving Card

By Helen Gullett

Hello crafty friends!
Today, I would like to share how to make this clean-and-simple (CAS) Happy Thanksgiving card. It is easy and quick to make for mass-production handmade cards.
Let’s get crafting!

Skill: Beginner
Time: 15-20 minutes

Direction:

Step 1
We are going to stamp directly on top of an A2 card base (4.25 inch x 5.5 inch card).
Start by stamping the texture background on the card with VersaFine Clair Sand Dune ink pad.

Step 2
Next, stamp another texture stamp (on this one I used dots) randomly on the card using VersaFine Clair Portobello ink pad.

Step 3
This step we are going to blend the ink colors on the stamp by adding lighter ink first then darker ink using sponge daubers, and then stamping it on the card.

First, add the VersFine Clair Cheerful ink randomly on the leaf stamp, then add some of the VersaFine Clair Summertime ink, and then add some of the VersaFine Clair Red Tulip ink. Using sponge daubers is the best way adding the ink that will make the ink blending well directly on the stamp.

Stamp inked leaf image on the card as soon as you are done. Using VersaFine Clair inks are great for this technique because they have longer drying time.

Step 4
On a piece of white cardstock, stamp the sentiment and frame using VersaFine Clair Portobello ink pad. Dry the stamped image with a craft heat gun.
Fussy cut the stamped image with scissors around the frame.

Step 5
Add some of the Tear It! Tape on the back of the sentiment and then add some of the burlap twine on it, wrap around to make it  look like a simple wreath. Press the burlap twine firmly on the tape.
Add a small piece of white fun foam and then add some of the Tear It! Tape on it.
Add the sentiment on the card.

Isn’t that quick and easy to make this CAS Thanksgiving card? It looks simple yet has some layers and texture on it. I hope you will give it a try.

Thank you for stopping by our blog today. Have a fabulous day!

Craft Supplies

Imagine Crafts:

Others:

  • Fall Colors Stamp Set (Precious Remembrance Stamps)
  • Neenah Solar White Cardstock 80 lb
  • Burlap Twine
  • Stamping Blocks
  • Micro-tip scissors
  • Paper trimmer
  • Bone folder

Let’s Make Elegant Holiday Cards

By Ceil Pritchett

Hello Crafty Friends. Today, I am sharing how to add dimension to your card using diecuts and VersaFine Clair Inks.

Skill Level: Beginner to Intermediate
Time: 30 to 45 Minutes

Directions:

Step 1:
Gather your supplies. You will need several colors of ink, a stencil, a background cover plate, and die cuts for your stenciled image. You will also need VersaMark ink and some clear embossing powder.

Step 2:
Using a grip mat or another sticky mat, lay your panel on the mat and cover with the stencil. Use several colors of ink to color the snowflake. Repeat this process 3 times.

Step 3:
Using the coordinating die, cut out all of the snowflakes you colored along with 6 others out of a heavyweight cardstock. Add the ones cut out of the heavyweight cardstock to the colored ones. This will give you dimension for the snowflakes and will still go through the mail without extra postage.

Step 4:
Stamp the sentiment in purple ink and emboss it with clear powder. For my sample I decided to go with embossing it with silver powder on purple cardstock.

Create a background by using a cover plate die.

Assemble your card.

I created a second card with the left-over pieces.

Craft Supplies:

Imagine products:
VersaFine Clair – Bali Blue, Warm Breeze, Lilac Bloom and Very Peri
VersaMark
On Point Glue

Other products:
Neenah Classic Crest Solar White 120lb – CutCardStock
Neenah Classic Crest Solar White 80lb – CutCardStock
Stardream Silver Metallic 105lb – CutCardStock
Radiating Snowflake Stencil – PinkFresh Studio
Radiating Snowflake Die – PinkFresh Studio
Holiday Greeting Sentiments – PinkFresh Studio
Cover plate die – PinkFresh Studio
Merry Die –  Kristina Werner C9

Make a Ouija Board Halloween Card with VersaFine Clair Inks

By Kathi Rerek

Halloween is the time of the year when the veil is the thinnest and people seek out spooky experiences. Here’s a card with NO stamping that uses both the old and new VersaFine Clair Inks with stencils and die-cuts!

Skill Level: Intermediate
Time: 1.5 hours

Instructions:

Step 1:
Use a Sponge Dauber to apply Sand Dune VersaFine Clair ink to a piece of white cardstock.

Step 2:
Use low-tack tape to secure the inked cardstock to the back of a wood-grain stencil. Use a sponge dauber to apply Sand Dune VersaFine Clair over the stencil onto the cardstock to create a subtle wood grained look. Remove the stencil and heat set the cardstock.

Steps 3A through 3E:
Use low-tack tape to secure the image panel to the back of the Ouija Board Stencil. Different colors of VersaFine Clair Inks and Moonlight White Brilliance ink will be applied to various areas of the stencil. I ended up adding Starlite Silver over the Moonlight White to add more contrast. Sorry there’s no photo.

Place Post-It Notes to protect areas of the stencil and keep a paper towel at hand to wipe excess ink off of the stencil to avoid unwanted ink transfer.

Use a Sponge Dauber to apply Cheerful VersaFine Clair to the sun area of the stencil. Use a Sponge Dauber to apply Moonlight White Brilliance Ink to the moon and the clouds area of the stencil (3A).

Use Sponge Daubers to apply Grass Green and Strawberry VersaFine Clair Inks to the “Yes” and “No” words on the stencil (3B)

Use Sponge Daubers to apply Purple Delight and Monarch VersaFine Clair Inks to the the alphabet on the stencil (3C). Remember to use a paper towel to wipe away excess ink.

Use a Sponge Dauber to apply Summertime VersaFine Clair Ink to the numbers on the stencil (3D).

Use Fantastix to apply Lilac Bloom, Bali Blue, Summertime, and Cheerful VersaFine Inks to the stars on the stencil (3E)

Remove the stencil and thoroughly heat set the image panel.

Step 4:
Use a Sponge Dauber to apply Lilac Bloom VersaFine Clair Ink to a piece of Mixed Media paper to create the background panel. Heat set.

Steps 5A and 5B:
Use low-tack tape to secure the Lilac Bloom inked paper to the back of the Dynamic Stencil.

Use a Sponge Dauber to apply Purple Delight VersaFine Clair Ink randomly over the stencil (5A) onto the background panel. Use a separate Sponge Dauber to apply Monarch VersaFine Clair Ink over the the rest of the stencil (5B) onto the background panel.  Remove the stencil and heat set the panel.

Step 6:
Use the skeletal hand cutting die to cut three hands from white cardstock.

Use a Sponge Dauber to apply Wheat VersaMagic Ink to the edges of the hands, fingers, and wrist bones. You can use the pointed edge of the DewDrop Inkpad to reach between the fingers! When the bones are aged to your liking, heat set all three hands then set them aside.

Step 7:
Cut a piece of white cardstock to 5.25” x 3.875”. Use a Sponge Dauber to apply Summertime VersaFine Clair Ink to the outer .5” of the panel. Heat set. Use this panel to mat the Ouija Board Panel, then adhere the matted Ouija Board panel to the stenciled background panel. Sorry that there’s no photo.

Steps 8A and B:
Use a Sponge Dauber to apply Bali Blue VersaFine Clair Ink to a sentiment sticker (8A). Heat set.

Use a Flag Die to cut white cardstock. Use a Sponge Dauber to apply Lilac Bloom VersaFine Clair Ink to the die-cut. Heat set.

Adhere the sticker onto the die-cut flag. Set aside.

Step 9:
Press the plastic planchette facedown onto the Pumpkin StazOn Inkpad. Smoosh it around.Carefully remove and allow to dry.

Steps 10A and 10B:
Place dimensional foam adhesive to the back of all three skeletal hands. Fold all the fingers, except the index fingers, backwards at the second joint, and press them onto the adhesive foam. You can add a piece of Tear It! Tape over them to keep them in place. Use a Sponge Dauber to apply Sand Dune VersaFine Clair Ink to the backs of the fingers and the joints to further “age” them (10A).

Use On Point Glue to attach the Planchette so that it’s pointing at the “H” for Halloween. Apply On Point Glue to the back of index fingertips, remove the tape backing, and adhere the skeletal hands as shown (10B).

Step 11:
Create a 5” x 7” card from white textured cardstock. Use a Sponge Dauber to apply Monarch VersaFine Clair Ink to the outer .5” of the card. Heat set.

Step 12:
Use Tear It! Tape to adhere the layers of the card.

Finished Card

Imagine Crafts Supplies:

Other Supplies:

  • Bristol Paper by Strathmore
  • Avalanche Textured Cardstock by Bazzill Basics
  • Ouija Board 6×6 Stencil by Strumpet Stencils
  • Woodgrain Stencil by Prima Marketing
  • Dynamic Stencil by Lavinia Stamps
  • Skeletal Hand Cutting Die Source Unknown
  • Large Ouija Board Planchette by Retro Cafe Art
  • Low-Tack Tape
  • Post-It Notes by 3M

Winter Wedding Card Using New VersaFine Clair Inks

By Alison Heikkila

Hello! I’m Alison Heikkila. For my latest video for Imagine, we will be using some of the newest VersaFine Clair Ink colors along with a new BetterPress Plate from Yana Smakula and Spellbinders. The card was made with a Winter Wedding theme in mind, but you can change this to suit your needs.

Skill Level: Beginner-Intermediate
Time to Complete: 20-30 Minutes


*Some affiliate links are used in this post. That means that if you shop through these links, I may receive a small compensation, at no cost to you. 

Supplies:
Imagine:
Baby Pink VersaFine Clair Ink
Lilac Bloom VersaFine Clair Ink
Hawthorn Rose VersaFine Clair Ink
Spruce VersaFine Clair Ink
Twilight VersaFine Clair Ink
Pinecone VersaFine Clair Ink
Shady Lane VersaFine Clair Ink
Cheerful VersaFine Clair Ink
On Point Glue

Other:
Spellbinders: Festive Poinsettias BetterPress and Stencil Bundle
Spellbinders: Handwritten Sentiments Die Set
Spellbinders: BetterPress System
A Colorful Life Designs: Luminous Petticoat Pink Card Bling
Scrapbook.com: Artis Craft Glue
Accent Opaque: 100lb. White Cardstock

Create a Spooktacular Halloween Card with VersaFine Clair’s Latest Colors!

By Anna Escalada York

In today’s card, I used many of the new VersaFine Clair Ink colors to make another Halloween card.

Skill: Intermediate
Time: 1.5 hours

Directions:

Step 1:
Die cut leaves and stems out of watercolor paper. Ink blend the fern-y shaped leaf with Baby Pink VersaFine Clair ink and the individual leaves with Lilac Bloom VersaFine Clair ink. I pressed the stem die cut into the Sand Dune VersaFine Clair ink pad and the leaf cluster die cut into the Lilac Bloom VersaFine Clair ink pad. These were all set aside.

Step 2:
A sparkly piece of rose colored cardstock was die cut with a bow die cut.

Step 3:
Two bats and a crow were die cut out of watercolor paper. The crow die cut was pressed into the Portobello VersaFine Clair ink pad and the two bats were pressed into the Very Peri VersaFine Clair ink pad.

Step 4:
Press a die cut leaf cluster and boo sentiment die cuts into the Hawthorn Rose VersaFine Clair ink pad.

Not pictured: die cut a piece of sparkly white cardstock with the same boo sentiment. If desired, also die cut scrap cardstock twice with the same sentiment. Glue the sparkly white cardstock behind the boo sentiment so that the white sparkly cardstock peeks out on the side (like a shadow).

If adding the two layers of scrap cardstock layers behind the sentiment, trim the second o (the one on the right side) off both layers so that when it gets glued onto the wreath, it lays flat.

Step 5:
Die cut the wreath twice–once out of watercolor paper and once with more of the white sparkly cardstock. Spray the watercolor paper wreath with Angel Pink Fireworks! Shimmery Craft Spray and the white sparkly cardstock wreath with Rose Gold Sheer Shimmer Craft Spray. Set aside to dry.

Step 6:
Die cut another piece of watercolor paper with a smaller panel die cut. Roughly ink blend the panel with more of the Lilac Bloom VersaFine Clair ink. Then swipe the panel with the ink pad in a variety of directions and the edges of the panel. Add Clear Mboss embossing powder to the edges fo the panel and heat emboss.

Step 7:
Add a piece of patterned washi tape to a piece of scrap cardstock and die cut with a larger panel die cut. (If you don’t have washi tape, use patterned paper or a colored piece of cardstock.)

Step 8:
Run the smaller card panel through the die cutting machine with the plate die to add some additional texture.

Step 9:
Glue all of the die cut elements together. Start with the two wreaths, with the pink layer underneath the rose gold sparkly wreath on the top, making sure they are off set. Then glue the leaves, the crow and the bats along the wreath. The bow is glued down on the lower left part of the wreath. Glue the wreath onto the purple panel. The sentiment was glued down next. Gle the whole panel onto the larger, washi tape panel. Then splatter the whole thing with more of the Rose Gold Sheer Shimmer Craft Spray. Let dry.

Step 10:
Glue the frame gems on the lower left and upper right parts of the panel.

Step 11:
Glue the whole thing onto an A2-sized gray cardbase.

Art Supplies

Imagine

Other

  • Crafty Meraki – Embellishments – Meraki Sparkle Clear
  • Gina Marie Designs – Die set – Big and Little Chain Rectangle die set
  • Simon Says Stamp – Die – Detail Swirls Plate wafer die
  • Sizzix and Tim Holtz – Die set – Vault Foliage Wreath Thinlits dies
  • Sizzix and Tim Holtz – Die set – Vault Gothic Portraits Thinlits dies
  • Sizzix – cardstock – Rose Gold Opulent Cardstock
  • Watercolor paper
  • White glittery cardstock
  • Die cutting machine
  • Paper Trimmer
  • Scissors

Make a Too Cute to Spook Halloween Card with VersaFine Clair

By Helen Gullett

Hello crafty friends! Today, we are going to make this Halloween theme card using color blending techniques with VersaFine Clair ink pads and stamping with Staz-On Pigment ink pad.
Let’s get crafting!

Skill: Intermediate
Time: 15-20 minutes

Direction:

Step 1

Cut out a piece of white cardstock into 4.25 inch x 5.5 inch.

Cut a piece of masking paper using 1 inch circle punch or any circle die. Peel off the backing of the masking paper and add it to the cardstock.

Start adding each color on the cardstock using a blending brush one by one. Colors I used for this background are VersaFine Clair: Medieval Blue, Monarch, Purple Delight, and Summertime. You can repeat adding colors until you are happy with the blended colors.

Step 2

Next step is randomly stamping the small star images on the background using the Snowflake Staz-On Pigment Ink Pad. This white pigment ink is opaque and the white ink sits on top of other colors.

Remove the masking paper of the cardstock.

Step 3

On another piece of white cardstock, stamp the bat outline stamp with VersaFine Clair Nocturne ink pad.

Put the bat solid stamp in the stamping block and add some VersaFine Clair Morning Mist ink pad on it, line up the bat solid stamp on top of the stamped bat image, and stamp.

Stamp the sentiment and banner image with VersaFine Clair Nocturne ink pad on a white cardstock.

Cut them with the matching die set, or fussy cut them with scissors.

Step 4

Add the background mat to the card base with some of the On Point Glue. Press firmly for a few seconds until the glue dries.

Add the bats and sentiment banner to the card with On Point Glue.

Optional, you can add some extra sequins to the card, or just leave as it is.

Step 5

For extra shimmer, I added some Sheer Shimmer Sparkle spray on the card with small flat brush.

Aren’t those bats too cute to spook? I hope this Halloween card can put a smile on your face, too. Thank you for stopping by our blog today. Have a fabulous day!

Craft Supplies

Imagine Crafts:

Others:

  • Happy Halloween Stamp Set and Die Set (retired)
  • Neenah Solar White Cardstock 80 lb
  • Sequins
  • Small flat brush
  • MISTI stamping tool
  • Stamping Blocks
  • Micro-tip scissors
  • 1 inch circle punch (or circle dies)
  • Paper trimmer
  • Die cutting Machine