Learn How To Make Your Own Beads Using Light Weight Clay

by Kyriakos Pachadiroglou

Make bead pearls out of lightweight clay to use in jewelry pieces. The pearls have a marble-like effect that was made using the Radiant Neon Electric Coral ink pad and the help of Imagine Craft Mat. The intense of the coral color can lighter or darker by allowing the clay to absorb the relative amount of ink when it is rolled on the Craft Mat.

Skill: Beginner
Time: 45 minutes + drying time

Directions


Step 1

Heavily stamp with the Radiant Neon in Electric Coral ink pad on Imagine’s Craft Mat.


Step 2

Roll on the inked surface a piece of lightweight clay formed into cord-like shape. Form a ball/large pearl in your palms. Continue making more large pearls.


Step 3

When you finish forming the pearls, and before the clay dries, use a piercing tool to open holes through the pearls. Make sure that they are well opened to allow easy access to the cord.


Step 4

When the clay dries, pass the pearls and the metallic beads in alternate order on the waxed cord. Add end clasps and lobster hook at the ends of the cord.


Step 5

For the earrings pass a bead and a pearl in flat head jewelry pin and using the round nose pliers attached on the earring hook.

Supplies

Imagine
Other
  • Lightweight clay
  • Jump rings, lobster hook
  • Earring hooks
  • Metallic beads
  • Waxed cord
  • Piercing tool
  • Pliers

Learn How To Make A New Years Eve Necklace And Earrings

by Kyriakos Pachadirolgou

The leaf shape of the new Dewlet dies to inspire me to create a piece of jewelry everyone can make. Combining two different colors of metallic sheets, a gold one and a silver using SHEET Metal from Imagine, you can shape a shiny but still elegant necklace with a matching set of earrings. This project would make excellent New Years Eve celebration jewelry.

Skill: Advanced
Time: 1 hour

Directions


Step 1

Cut leaves from the SHEET Metal ATC cards and the gold colored aluminum foil. For this set, you will need 10 pieces for the necklace and 2 pieces for each earring.


Step 2

Lay the leaves on a flat surface, place them in the desired design and take a photo to follow the shape later.


Step 3

Use the round shape embossing tool and press into the leaves to create a hammered look.


Step 4

Set a small piece of Tear It! Tape on the back side of each leaf and add a drop of jewelry glue. This step will keep the leaves together in order to proceed to the next one and allow time for the jewelry glue to dry well.


Step 5

To set the waxed cord you can either punch holes and use jump rings or you can just glue it to the back of the leaves. The second option gives a more a steady result on the form of the necklace.


Step 6

To make the earrings, attach two leaves together, punch a hole and place the earring hook.

Supplies

Imagine
Other
  • Gold color aluminum foil
  • Jewelry glue
  • Waxed cord
  • Earring hooks
  • Jewelry end hooks/claps
  • Round embossing tool
  • Die cutting machine

See How to Make Earrings with Rinea Foil

by Kyriakos Pachadiroglou

See How to Make Earrings with Rinea Foil

To be a star yourself, you need extra star shine in your jewelry! Crafting a pair of supersize star shape earrings is easy with Imagine Sheet Metal and the Starstruck foiled paper from Rinea. The Sheet Metal star frames that are created with dies, keep inside the double-sided foiled paper that shows on both sides of the earrings with no extra work. Tear It Tape is a great tool to attach the metal pieces and the paper together. A liquid glue that may leak on in the center. To gift the star shape earrings, create a small pocket with more Rinea foil paper and a small sentiment stamped with VersaFine Clair ink. See how I did it! 

Skill: Advanced
Time: 40 minutes

Directions

Imagine's Sheet Metal using a 2.5-inch and a 1.75-inch star dies
Step 1

Die cut four star-shaped frames from Imagine’s Sheet Metal using a 2.5-inch and a 1.75-inch star dies.

Die cut 2 Rinea foil paper stars
Step 2

Die cut 2 Rinea foil paper stars using a 2-inch wide star frame.

Tear It Tape around the Sheet Metal star frame
Step 3

Place Tear It Tape around the Sheet Metal star frame on the back side of it.

Rinea foil paper star
Step 4

Set the Rinea foil paper star. It will leave space around it so you can easily glue the second-star frame.

Punch a small hole and add a large jump ring and an earring hook
Step 5

Punch a small hole and add a large jump ring and an earring hook. Repeat on the second earring.

5x5 piece of cardstock
Step 6

Score a 5×5 piece of cardstock at the lower 2-inch mark, place Tear It Tape on the short sides and fold to make a pocket.

Rinea foil, place Tear It Tape and glue on the folded side
Step 7

Cut a 1×5 inch piece of Rinea foil, place Tear It Tape and glue on the folded side.


Step 8

Punch two hole on the main card, leaving 1 ½ in from each side.

Stamp the "Wish" sentiment stamp with VersaFine Clair Purple Delight ink
Step 9

Stamp the “Wish” sentiment stamp with VersaFine Clair Purple Delight ink and cut along.


Step 10

Set a star of Sheet Metal that previously removed to make the frame and the “Wish” stamped paper cutting on the front of the card using Tear It Tape.

make a set of star earrings with a matching wish gift card

Supplies

Imagine
Other
  • Rinea – Starstruck Violet foiled paper
  • 5 x 5 white cardstock
  • Star shape dies
  • Die cutting machine
  • Jump rings and earring hooks
  • Hole punch
  • Crackerbox & Suzy – Wish stamp

Make an Easy Fabric Necklace with All-Purpose Ink

by Kyriakos Pachadiroglou

Make an Easy Fabric Necklace with All-Purpose Ink

Make your own fabric cords necklace colored with All-Purpose Ink. The fabric creates a distressed look while the square metal piece creates a modern look. The added shine will catch the eye with a piece of Sheet Metal that works a buckle to hold the fabric stripes and connects them with the wax cord of the rest of the necklace. This is a super fun craft project but also will make a beautiful gift or fashion statement!

Skill: Advanced
Time: 1 hour

Directions


Step 1

On a 14 inch-long piece of fabric mark triangles with a base of 1 ½ in. Cut 3 of them.


Step 2

Color the stripes with the All-Purpose Ink and a medium paintbrush making large strokes. No need to fully cover the fabric. Let the paint dries or use a heat tool. Iron the fabric to set the paint.


Step 3

Use a sponge dauber and the Memento Luxe in Rhubarb stalk to make a deeper red shade, fading the lightness of the red paint. Iron the fabric to set the ink.


Step 4

Using a thin stick start wrapping the fabric stripe, beginning of the base. Use fabric glue on the edge to set it and move further. Continue with all three.


Step 5

Cut in half a Sheet Metal ATC card and punch the corners with a round corner punch.


Step 6

Use a metallic ruler or something steady and thin to nicely fold in half the Sheet Metal piece.


Step 7

Glue the wider edges of the fabric cords between the Sheet Metal piece, making sure that they don’t reach the deep end of it.


Step 8

Loosely braid the fabric cords at the beginning of them. Attach a flat jewelry end cap on the other side (at this point you can trim to the desired length).


Step 9

Pass through the Sheet Metal piece 4 pieces of a waxed black cord 4 inches in length. Add a cap and lobster lock and you are finished.

For more tips on jewelry making please see Kyriakos’ tutorial.

Supplies

Imagine
Other
  • Lightweight cotton fabric
  • Fabric glue
  • Round corner punch
  • Metallic ruler
  • Jewelry supplies – end caps, lobster locks
  • 1mm black waxed cord

How to Create a Metal Stamped Look with Creative Medium

by Jennifer Vanderbeek

How to Create a Metal Stamped Look with Creative Medium in Silver and Gold

I’ve been pondering puzzle pieces lately—as a craft medium and metaphor for life. Somewhere along the mental stroll, I was reminded of the old Girl Scouts song “Make New Friends” which goes

Make new friends
But keep the old
One as silver
And the other gold

Today’s project was inspired by the way friends fit into our lives like puzzle pieces, the song, and the best friend necklaces I swapped with those close to me back in the day. Metallic silver and gold Creative Mediums and letter stamps were a perfect combination to turn a couple puzzle pieces into jewelry charms.

Supplies

Imagine
Other
  • Puzzle Pieces
  • Wooden Spoon
  • Sticky Dots
  • Paint Brush
  • Darice – Heat Tool
  • Contact USA – Letter Stamps
  • Cornstarch
  • Craft knife
  • Jewelry findings
  • Satin cord or ribbon

Tips and Tricks: Crafting on a Budget

by Roni Johnson

Tips and Tricks: Crafting on a Budget

Crafting can get pricey! If you are spending too much on crafting and it is taking some of the joy out of it then we are sharing some easy ways to scale back but still engage in a great crafting routine. There are lots of articles out there about crafting on a budget and most of them discuss the same list of common sense ideas…

  • Price shop
  • Clip Coupons (IRL or web)
  • Shop at Dollar Stores or Thrift Stores
  • Upcycle/Recycle various items
  • Search web for ideas/patterns

These general ideas are nice and they are a good start but I want to give you some specific ideas and tips to help you save not only money but something more valuable…your time.

Buy Unmounted Rubber Stamps

Unmounted stamps can cost as much as 50-80% less than traditional wood mounted stamps, take up less space and are easy to store and use. To use unmounted rubber stamps, apply Tack ‘N Peel to your acrylic blocks. This is a clear reusable cling sheet that has a protective liner sheet that can be used over and over. Once it has been affixed to the acrylic block it is very simple to use, remove the clear liner sheet; position the stamp on the block as desired, ink and stamp. When you are finished stamping simply peel the rubber stamp off the block and replace the liner. If the Tack ‘N Peel loses its “sticky” quality simply wash with water and let it dry. After it is dry it will once again be ready to use.

Make your own Texture Stamps and Stencils

This is a fun and easy task when you stop and look around your home. You’ll be surprised at how many items can be turned into a usable texture for all sorts of crafts. For example, lace, food netting, cheesecloth can all be used as a stamp or stencil. Foam food trays can be carved to create stamps, bubble wrap, rubber bands, fibers, leaves, coins can all be turned into stamps by sticking them to an acrylic block. Pencils tips are great for the bokeh technique, kitchen utensils, game pieces, tools, feathers, flowers, and more can also be put to use. You only have to take a moment and look around to see what you have on hand that will create fun and new stamps or stencils for your art.

Clearly Embossed

Let’s face it there are hundreds if not thousands of colors and brands of embossing powders on the market. You could easily spend a small fortune collecting the various embossing powders available today. A great option is clear embossing powder; the original ink color will shine through and match your project perfectly. No need to sort through jar after jar trying to find the right color to match your project and no more storing all of those little jars either! Tip: Did you know you can turn virtually any dye ink into an emboss-able image? Press your stamp onto a VersaMark ink pad then onto a dye ink pad and then stamp the image. The image can now be embossed because of the VersaMark ink. This works particularly well with a clean VersaMark ink pad for lighter colors and I keep an old grungy VersaMark for darker colors.

Make Pattern Papers

Let’s face it, most of us have more pattern paper to last us the rest of our lives so instead of buying yet another sheet, pack or collection, break out your stamps and make your own pattern! It’s easy; all you need is a sheet of plain cardstock, ink and complimenting stamps. All sorts of designs can be achieved quickly and easily. Give it a try, you’ll be surprised how quickly it is to make. Making a pattern doesn’t have to be perfect…if you make a stamping mistake, look at it as an opportunity to embellish!

Coloring Pages as Art

There are thousands of beautiful coloring sheets up for grabs on the internet free for your personal use. These coloring pages are great because they can be re-sized to fit your particular project and they can be used for backgrounds as well as the main focal point. You can choose to print the images on the appropriate paper to fit your particular use and mediums you would like to incorporate be it plain cardstock, bristol cardstock, watercolor paper, mixed media paper and more. The uses are limitless.

No More Waste

To eliminate wasting various mediums by keeping a supply of plain tags or A2 size blank cardstock panels handy when you are creating. Use these spare pieces to pick up excess medium from your work surface and tools. You may choose to pick up mediums once or several times depending on your preference. These tags and panels can then be used to create one of a kind artwork in a snap. All of the hard work has already been done. Simply pop on the main image and/or sentiment and your set to go. Instant card or tag for whatever your need.

Multiples

When you’re making a card or gift be sure to work in multiples! By doing so you will cut down on waste and left-over scraps. If you use a quarter sheet of cardstock rather than pitch the extra or place it in the never-ending scrap basket make two or three similar cards to help use up all of the extra bits. Rather than having a basket full of scraps that you might or might not use you’ll end up with a basket of finished cards, tags, ATC’s, etc. that can be used in a moment’s notice.

No matter how you structure you crafting habits and budget you will find there are several ways to keep costs at a minimum. Thank you for stopping by the Imagine Blog!

Supplies

Imagine