Make a Card with VersaMagic Mango Madness

by Iris Rodriguez

Make a Card with VersaMagic Mango Madness. cardmaking tutorial. Spring time blooming flowers theme.

This month’s color at Imagine is Mango. Do you like mangoes? They are delicious. I like plain mangoes, mango juice, even mango in my summer salads. After creating today’s project, I can add to my list of mango appreciation VersaMagic Ink in Mango Madness. As I started using this beautiful color, I soon realized I could not stop at just coloring my tree; I also colored white paper flowers and a butterfly with this ink as well. You could say I had a Madness for this Mango Ink.

Skill: Intermediate
Time: 1.5 hours

Directions


Step 1

Spray the paper with water. Spray with Fireworks Shimmery Craft Spray in Summer Sky. Dry paper.


Step 2

Ink the paper with VersaMagic in Aegean Blue, Thatched Straw and Memento Luxe in Wedding Dress using the Sponge Dauber, Inkblusher, and Smudgee.


Step 3

Using a Sponge Dauber ink through the flowering tree stencil with the VersaMagic in Mango Madness. Emboss using Clear Embossing Powder. Place the stencil over the image again and ink through the stencil with the VersaMagic in Mango Madness. Emboss the image with the Sparkle Embossing Powder.


Step 4

Ink a scrap piece of watercolor paper on one side ink with VersaMagic in Thatched Straw and the other half ink the VersaMagic in Mango Madness. Emboss both colors using the Clear Embossing Powder. Punch out the butterfly with each ink color.


Step 5

Layer one butterfly over the other, adhere together with On Point Glue. Stamp the word “hello” on a piece of paper, cut a tag shape around the sentiment. Punch a hole in the center. Tie a piece of embroidery thread on the butterfly and tag.


Step 6

Ink VersaMagic in Thatched Straw on the Craft Mat, spray water and dip paper flowers in it, ensuring to completely color the flowers. Dry the flowers.


Step 7

Ink VersaMagic in Mango Madness on the flowers. Glue the flowers, butterfly, and tag onto the tree background using On Point Glue. For the yellow background paper, cut a piece of paper a little bigger than the main card, and ink the out edges with VersaMagic in Thatched Straw. Assemble the card by mounting the flowering tree stencil card panel to the yellow background card base.

I hope you are mad about this month’s color the way I was and give this project a try.

Supplies

Imagine
Other
  • Watercolor paper – 12 x 9 inches Cold Press, 300 GSM – 140 lbs
  • Deco Arts – Flowered Tree stencil
  • Paper flowers
  • Martha Stewart – Butterfly paper punch
  • Paper hole punch – 1/16 inch

Watch a Video Tutorial on How to Watercolor a Beautiful Yellow Rose

by Arjita Sepaha Singh

Do you have a friend who you would like to show appreciation? Water coloring stamped images is my favorite cardmaking style and I am always on a hunt for new mediums to use for the water colored effect. In this video, I used Altenew stamps, Gold embossing, and Fireworks Shimmery Craft Sprays to create this beautiful yellow rose friendship card and it turned out very pretty. This is a great crafting project for a best friend gift or to show someone you care.

Supplies

Imagine
Other
  • My Sweet Petunia – Misti Stamping Tool
  • Powder tool
  • Heat gun
  • Watercolor paper
  • Altenew – Floral Stamp set

Helpful Tips and Tricks: How to Take Amazing Photos of Craft Projects

by Martha Lucia Gomez

Helpful Tips and Tricks: How to Take Amazing Photos of Craft Projects

With the ever-growing popularity of social media platforms, particularly Instagram, crafters have been talking about how to take better photos of our projects. Since not all of us are professional photographers, and we don’t all have “the perfect tools”, I would like to talk about how to take great photos of your work without having to be a pro-photographer.

Style your photos creatively

These are important elements to focus on when taking a photo of a project:

  • the backdrop or background
  • main focus – which is always your project
  • props or supporting elements to make the focus shine
  • the camera

Backgrounds

With clear and simple photos you need to have a neutral base or background, like white, grey, ecru, cream or even brown tones like wood. Since most of us don’t have professional lighting, set your background up where it is in natural light, and make sure it is a large enough base to place your card or project. Try using dark colors in the background to help the project colors pop.

You can set up your background so that your project can be laid flat or standing up. I find that I can capture more details by taking photos of my cards flat on a surface with the camera located directly above it. Also, if you have a small space to take your photos, this option is perfect because it requires less space and can make it easier to incorporate other elements.

With flat photos, remember your backdrop is the most important part. If you are creative you don’t need to buy expensive elements, you can use everyday household items and surfaces as the background. The most important thing is to keep in mind the colors and textures. A brightly colored element next to your project can round out the scene and support the focal point, but being able to use it as the background will be trickier, tho can work on occasion.

You can use wood surfaces, floor boards, ceramic tiles or designer textured papers, as well as other supplies to add some depth to the photos. You can also use elements like designed plates, which can be easily found in home decor stores. My favorite is HomeGoods because I can buy just one plate, placemat or napkin. Neutral colored fat quarters found at the fabric store is another cheap option.

Supplies or Photo Props

With staging photos, it is nice to add a few elements alongside your card or project—but these cannot compete with the main focus object i.e. your crafting project. You can use many items as photo props. I use a lot of flowers and greenery, my favorites are made of silicone because the fabric flowers don’t look real to me. But definitely, my favorites photo props are the craft supplies. Supplies like inks, stamps, stencils, color pencils or markers, and die cuts are perfect elements to support your project. Extra embellishments like buttons, sequins, washi tape and twines are also great, but always be careful with the color combinations. My suggestion is to start with the neutral items first that won’t compete with your project. If you still aren’t finding what you like, just look around your home and you might find gorgeous elements that you can borrow for a few minutes as part of your photo.

Camera

With today’s technology, you really don’t need to have a professional camera. Cell phones like the iPhone or Samsung make it possible to take amazing photos. To make them work best, use natural light source and keep an eye out for any shadows across your photo. Also, think about a good angle to take the photo. Always start by making your lens parallel to the project front, and then play with the angle from there. My last helpful hint is very simple but important: always clean the lens of your camera or phone before taking the photos. Because we touch our phones so often it is easy for the lens to become dirty.

I hope you found these tips useful. Just remember to stay open to learning new ideas and most importantly have fun! Thank you for stopping by the Imagine blog and don’t forget to share!

Make a “Celebrate This Day” Card

by Jowilna Nolte

Every day is a gift! As a way to celebrate this notion, I created a handmade card with the theme “this day celebrate this life” to share this powerful message. See how to use layered ink to create a soft delicate effect with Tsukineko inkers. Create a beautiful effect on quick and easy cards using layered inks with a single stamp design. This effect is so easy but looks amazing against the yellow inked background, fitting right in with our color of the month–Mango. Take a look how I created this easy and effective stamped look.

Skill: Beginner
Time: 1 hour + dry time

Directions


Step 1

Create a watercolored style background using Tsukineko Dye Inkers in Golden Brown and Mustard. Add a few drops of both of the inkers onto your craft mat, mist or dilute with water and dip a piece of white cardstock into the ink. This ink is very dense and will coat the entire piece of cardstock. Leave to dry.


Step 2

Position the flower stamp and cardstock piece with the Misti Stamping Tool and stamp using VersaFine Clair in Pinecone.


Step 3

Clean the stamp and while keeping it in the same position, ink the image with VersaMagic Mango Madness. Stamp over the same image with the yellow to soften the brown ink color and create an additional layer.


Step 4

Stamp the sentiment “this day celebrate this life” overlapping the flower images using VersaFine Clair in Nocturne to make it stand out against the brown and yellow tones.


Step 5

Above is another version of this design. You can play with these ideas to create several cards. From here detail the design in your own style with brads, sequins, diamanté, and mount to the card base to finish the card.

Thank you for stopping by the Imagine blog and if you enjoyed this tutorial then please comment below or share on social media! 

Supplies

Imagine
Other
  • White cardstock
  • Flower stamp
  • Altenew – “celebrate this life” stamp
  • Brad
  • Misti Stamping Tool
  • Sequins

See How to Create a Relaxing Sunset with VersaFine Clair

by Kyriakos Pachadiroglou

See How to Create a Relaxing Sunset with VersaFine Clair

Do you know someone who is overdue for a vacation? Perhaps they are not sure whether they deserve a break? Today’s project is a perfect encouragement card for such a person. This card brings a desire for summer vacations and relaxation that makes you want to be inside the scene with the warm colors and the sense of calmness it gives. It allows you to dream of the place of a tropical island or somewhere in Africa. The deep colors of VersaFine Clair ink pads make them ideal for vibrant shades on paper and Imagine’s Sheet Metal pieces. See how I made this card.

Skill: Intermediate
Time: 1 hour

Directions

 VersaFine Clair in Summertime. Sprinkle Imagine’s Embossing Powder in Clear
Step 1

Use a jumbo sponge dauber to color the Sheet metal circle with the VersaFine Clair in Summertime. Sprinkle Imagine’s Embossing Powder in Clear and heat set. Repeat the process a couple more times.

VersaFine Clair in Summertime and Golden Meadow inks
Step 2

Cover a 4 x 6 cardstock by laying and blending VersaFine Clair in Summertime and Golden Meadow inks with a jumbo sponge dauber. Use the VersaFine Clair in Pinecone for the lower part of the card.

VersaFine Clair in Pinecone
Step 3

Emboss the cardstock with the branches embossing folders only at the bottom of it and enhance with more VersaFine Clair in Pinecone.


Step 4

Die cut the beach hut and color with the VersaFine Clair in Pinecone and Summertime.


Step 5

Use the rest of the die cut paper as a stencil and with the help of a sponge dauber make huts on the cardstock.


Step 6

Press the palm plywood shape on the VersaFine Clair Pinecone and use it to stamp on the cardstock.


Step 7

Color the plywood shapes and the Icelandic moss with the VersaFine Clair in Pinecone.


Step 8

Cut small pieces of the Tear It Tape and set the Sheet metal circle.


Step 9

Glue the plywood shapes with the On Point Glue and use foam tape to keep the beach hut raised from the background. Place the cardstock on the front of a 5 x 7 card.

Supplies

Imagine
Other
  • 5 x 7 cardbase
  • Cardstock – White
  • Plywood embellishments – palm tree
  • Marianne Design – Beach hut die
  • Icelandic moss
  • Foam tape
  • Heat tool
  • Hot glue gun
  • Embossing machine and folder

Create a Sunny “Hello” Card for a Good Friend

by Elina Stromberg

Create a Sunny "Hello" Card for a Good Friend with Memento DewDrops

Our wonderful color of the month is ‘Mango’. That rich and warm yellow color took my mind right in the middle of sunny summer days, and that feeling inspired me to create a summer-themed flower card. Matter of fact—I made two card fronts on one go, but instead of creating two identical greeting cards I trimmed the other one into an ATC card. Love them both!

Skill: Beginner
Time: 45 minutes

Directions


Step 1

Stamp image on white paper with VersaMark. Heat emboss with Imagine’s Embossing Powder in Black.


Step 2

Apply the two shades of yellow inks in Memento on the background using a brayer. Start with the lighter color and add the darker yellow on top. Do not cover the entire background but ink the center of the card only.


Step 3

Using the Craft Mat as a palette, press ink on the craft mat. Pick up colors with a water brush, and paint the image.


Step 4

Cut stamped card front to size and mat on a white card base. Die-cut the “hello” sentiment twice, glue together with On Point Glue and attach to the card front.

Above is ATC version of this card in a vertical format and without the “hello” sentiment.

Supplies

Imagine
Other
  • Brayer
  • Stampendous – Cling Daisy Cluster Stamp
  • Sizzix – ‘Hello’ die
  • Cardstock – white, yellow, black
  • Water brush
  • Heat gun
  • Cardbase
  • Glue
  • Scissors