Category Archives: DIY

Make an Easy Fabric Necklace with All-Purpose Ink

Posted on by

by Kyriakos Pachadiroglou

Make an Easy Fabric Necklace with All-Purpose Ink

Make your own fabric cords necklace colored with All-Purpose Ink. The fabric creates a distressed look while the square metal piece creates a modern look. The added shine will catch the eye with a piece of Sheet Metal that works a buckle to hold the fabric stripes and connects them with the wax cord of the rest of the necklace. This is a super fun craft project but also will make a beautiful gift or fashion statement!

Skill: Advanced
Time: 1 hour

Directions


Step 1

On a 14 inch-long piece of fabric mark triangles with a base of 1 ½ in. Cut 3 of them.


Step 2

Color the stripes with the All-Purpose Ink and a medium paintbrush making large strokes. No need to fully cover the fabric. Let the paint dries or use a heat tool. Iron the fabric to set the paint.


Step 3

Use a sponge dauber and the Memento Luxe in Rhubarb stalk to make a deeper red shade, fading the lightness of the red paint. Iron the fabric to set the ink.


Step 4

Using a thin stick start wrapping the fabric stripe, beginning of the base. Use fabric glue on the edge to set it and move further. Continue with all three.


Step 5

Cut in half a Sheet Metal ATC card and punch the corners with a round corner punch.


Step 6

Use a metallic ruler or something steady and thin to nicely fold in half the Sheet Metal piece.


Step 7

Glue the wider edges of the fabric cords between the Sheet Metal piece, making sure that they don’t reach the deep end of it.


Step 8

Loosely braid the fabric cords at the beginning of them. Attach a flat jewelry end cap on the other side (at this point you can trim to the desired length).


Step 9

Pass through the Sheet Metal piece 4 pieces of a waxed black cord 4 inches in length. Add a cap and lobster lock and you are finished.

For more tips on jewelry making please see Kyriakos’ tutorial.

Supplies

Imagine
Other
  • Lightweight cotton fabric
  • Fabric glue
  • Round corner punch
  • Metallic ruler
  • Jewelry supplies – end caps, lobster locks
  • 1mm black waxed cord

See How to Make Rose Petal Using Creative Medium

Posted on by

by Kyriakos Pachadiroglou

See How to Make Rose Petal Using Creative Medium

Working with the Creative Medium on some of my crafting projects, I noticed how it shows when it gets dry on the craft mat. Combining the nonstick feature of Imagine’s Craft Mat with the elasticity of the Creative Medium, I thought it could create a new kind of project–rose petals! Leaving a thick coat of the Creative Medium on the Craft Mat, it gives you a material for dimensional creation. The roses crafted with it can be part of the decoration on a festive table, attached on gift boxes, gifted as they are, or be an inspiration to use on various craft projects. The Creative Medium can be also mixed with different inks to make multiple colors of flowers.

Skill: Advance
Time: 1 hour + drying time

Directions


Step 1

Use a palette knife to lay a thick layer of Creative Medium on the Craft Mat making circles. Let the Creative Medium dry well. For each rose, you will need 7 circles to create the petals.


Step 2

When the Creative Medium dries, remove the circles and start rolling one to make the center of the rose.


Step 3

Continue by attaching more circles forming them to petals. Note that you may need to trim around a bit the circles if the Creative Medium is not spread nicely on the craft mat.


Step 4

While you attach more petals, bend the edges a bit and hold them to keep the shape of the petal. The Creative Medium is sticky enough to keep the petals together with no need of extra glue.


Step 5

Press the branches on the VersaMark inkpad, cover with Imagine’s Embossing Powder in Gold and heat set.


Step 6

Cut small pieces of the florist brown tape and trim the edges to form triangles.


Step 7

Press lightly the branch in the rose, secure with hot glue and cover with the trimmed tape. Add more tape around them for a better presentation.


Step 8

Color the fabric roses with the VersaFine Clair Chanti ink pad and then distress them with the irRESISTible Pico Embellisher in Gold. When they dry, glue them on the branches.

 

Supplies

Imagine
Other
  • Thin branches
  • Faux/fabric rose leaves
  • Florist brown tape
  • Scissors
  • Hot glue gun

Learn to Make Cute Backgrounds Using VersaMagic Ink

Posted on by

by Arjita Sepaha Singh

Learn to Make Cute Backgrounds Using VersaMagic Ink

Today, I used a few tiny stamps from a Gina K stamp set and VersaMagic Inks to create a super cute pastel background for a Happy Fall handmade card. This papercraft project can be done using any inks you have in your collection. I used the VersaMagic since I really like the chalky soft appearance it gives.

Skill: Beginner
Time: 30 minutes

Directions

Supplies

Imagine
Other
  • Xpress It smooth card stock
  • Acrylic Blocks
  • Gina K Designs – stamp
  • Whimsy Stamps – Scallop Die
  • Die cut machine

Make Magic With This Merry Christmas Gift Tag

Posted on by

by Jowilna Nolte

Make Magic With This Merry Christmas Gift Tag

Every year I make loads of Christmas cards, but this year I am creating tags for friends and family. A handmade tag is a quick and crafty alternative to attach to a gift and even packets of freshly baked biscuits. The tag is often underestimated but this will become my go-to way of adding a quick thank you to gifts – quick and easy to make with loads of impact.

Skill: Intermediate
Time: 1 hour

Directions


Step 1

Use a Jumbo dauber and ink the background of a tag using Rhubarb Stalk Memento ink.


Step 2

On the right edge of your tag use Memento Luxe ink in Rhubarb Stalk and add some darker shaded edges on your tag.


Step 3

On a sheet of smooth white cardstock mist Summer Sky Fireworks Spray. Use a soft paint brush and brush the ink across the cardstock.


Step 4

While the Summer Sky ink is still wet, use Lilac Posies and splatter ink over the base. Concentrate on certain areas more to get lots of ink in certain areas. Leave to dry.


Step 5

Once dry use VersaFine Clair Nocturne ink and stamp Christmas Bauble. Cut out and ink the edges.


Step 6

Use VersaFine Clair ink and stamp a Christmas sentiment repeatedly onto the colored tag.


Step 7

Use at least 3 colors of Fireworks Spray to add splats to the background and leave to dry or heat set using a heat gun.


Step 8

Adhere the stamped bauble, flowers and themed embellishments to finish off your tag. As an alternative layer two stamped baubles on top of each other using foam tape.

 

Supplies

Imagine
Other
  • Cardstock – White
  • Tag
  • Kaisercraft – stamp set
  • Little Birdie – Flowers
  • Charms
  • Bakers twine

Learn to Make a Pendant from Clay

Posted on by

by Iris Rodriguez

Learn to Make a Pendant from Clay

Making your own jewelry can be so rewarding. You get to make fun and exciting creations, express yourself and make a statement. Making beads out of polymer clay is a great way to get started or simply experiment and see if you like it. The beads can be stamped, colored, and even embossed. For this project, I made a round, dome-shaped bead, stamped it and embossed with silver embossing powder.

Skill: Intermediate
Time: 30 minutes + baking time according to clay manufacturer instructions

Directions


Step 1

Set out your mat. Ceramic, glass or special mats like Polyform’s Sculpey Make ‘N Bake Mat surfaces work best when working with clay.


Step 2

Begin by conditioning the clay with a clay roller, or pasta machine. When first taking the clay out of the package, roll the clay a few times in order to soften it. If it cracks when running it through the pasta machine or roller; this means that it’s not conditioned. So continue to condition. If using a pasta machine, roll one sheet of clay to the third thickest setting. If using a roller, aim for 1/16 inch thickness. Place stamp over the clay, press firmly into the clay with your fingers or clay roller.


Step 3

Remove stamp. Ensure you get a deep indentation so that you have good dimension.


Step 4

Using the Premo Sculpey Circle cutters, cut out the clay. Use the second largest cutter from the set.


Step 5

Prepare the pendant for baking. In order to get a dome shape, place the clay over a rounded object, like a burned out light bulb or the round edge of a ceramic bowl. Bake the clay according to the manufacturer’s instructions on the package.


Step 6

While the clay is baking, prepare the bail. Using the Premo Sculpey Circle cutters, cut out a circle. Use the second smallest cutter from the set. Then use the smallest cutter and cut out tiny slices off on opposite sides of each other.


Step 7

After the clay cures, roll out a small sheet of clay to the 4th thickest setting in the pasta machine. Spread a little bit of liquid clay on the back of the bead. The liquid clay adheres the clay to each other. Adhere the newly rolled out sheet of clay. Cut out the excess with a precision knife. Texture the back. This is in case, the bead flips while you are wearing it and it will still look fabulous. Add a couple of drops of liquid clay to the bail and adhere to the bead. Before doing so, lay down a piece of wire, so that it bakes with an opening. This is where the cord will go through. Bake the bead according to the manufacturer’s instructions on the package.


Step 8

Ink the raised areas with the VersaMark ink. Add embossing powder in Silver. The clay tends to attract the embossing powder so it will want to go into the non-inked area. Use a liner brush to remove the embossing powder from the crevices.


Step 9

Heat set the embossing powder, just like you would on paper. The clay will tend to get a little soft with the heat. Let cool off, do not touch and risk distorting it. The clay will harden again. Seal the bead with Sculpey Gloss Glaze. It is very important to seal the clay. It protects the embossing powder and clay. Add the leather or cotton cord and clasp. Now you have a necklace to add to your wardrobe.

Supplies

Imagine
Other
  • Polyform – Sculpey Souffle Clay in Poppy Seed, Gloss Glaze, Graduated Cutter Circle Set
  • Lightbulb
  • Rubber Stamp
  • Leather or Cotton Cord
  • Jewelry Hardware: jump ring, clasp, needle nose pliers
  • Ceramic tile, crafting glass, or Sculpey Work ‘N Bake Clay Mat

Use a Plaid Stencil for a Mixed Media Christmas Card

Posted on by

by Kassy Tousignant 

Use a Plaid Stencil for a Mixed Media Christmas Card

It’s never too early to start making Christmas cards! How about making them mixed media style?! Imagine makes so many wondering mixed media products that work great on canvas layouts and cards alike. In this project, I use Fireworks Craft Spray and a plaid stencil to create multiple Holiday backgrounds at once.

Skill: Advanced
Time: 1 hour

Directions

Supplies

Imagine
Other
  • Liquitex – Flexible modeling paste
  • Prima – Heavy body gel, flower
  • Cardstock – white
  • Gold thread
  • 49 & Market – flower
  • My Minds Eye – brads and embellishments
  • Christmas patterned paper
  • Echo Park – plaid stencil
  • Stampin Up – dimensionals