Tag Archives: card making

Add Watercoloring to Your Cards with Memento Inks

Posted on by

by Kassy Tousignant

Handmade card featuring Waffle Flowers Let Love Grow stamps and Tsukneko's Memento inks.

The super adorable Waffle Flower stamps are perfect for coloring in with Memento ink! I love that I can create a simple, fun card with minimal supplies and have something adorable to give away. I used a little bit of Memento in Grape Jelly in both of my images and then found a matching piece of amethyst glitter cardstock to pull the whole thing together!

Skill: Intermediate
Time: 30 minutes

Directions

Supplies

Imagine
Other
  • Waffle Flower – Let Love Grow stamp set
  • Cardstock – white, glitter
  • Waterbrush
  • Foam adhesive

The most exciting part about the collaboration with Waffle Flower? You can WIN prizes! To enter all you need to do is subscribe to both Imagine and Waffle Flower’s YouTube channels and comment on the videos published this month using both of our products! (One comment per video per person.) Two lucky winners will win $50 gift certificates – one from each sponsor. Winners will be announced at the end of the month.

Add Dimension to a Single Stamp with Layers

Posted on by

by Roni Johnson

Amethyst is a lovely stone found in nature that’s color ranges from a deep rich purple to a smokey gray with all the sparkle and shimmer of diamonds. That is our color of the month and it is also the color scheme I used to create this triple layer card using Waffle Flower’s lovely Bouquet Builder 3 and a MISTI stamp positioner.


Skill: Intermediate
Time: 30 minutes


Directions


Step 1

Cut 3 cardstock panels from white cardstock using the following dimensions: 4 ¾” X 6.25”, 2.5” x 4.5”, 1.5” x 3.5”. Place the largest panel in the stamp positioner and center the large flower bouquet stamp in the center of the paper. Close the lid to pick up the stamp. Ink the stamp with Morning Mist VersaFine Clair ink; press the image onto the cardstock. Remove this panel from the stamping tool, leaving the stamp in place.

Step 2

Insert the 2nd panel into the positioning tool using the grid as a guide for proper placement. Ink the stamp with Electric Purple Radiant Neon ink and close the lid to stamp the image onto the second panel. Remove this panel from the positioning tool.

Step 3

Position the smallest panel into the positioning tool again using the grid as a guide for placement. Ink the stamp with Fantasia VersaFine Clair ink and stamp the image onto the third and last panel.

Step 4


Sprinkle Sparkle Mboss embossing powder over all three images; shake off excess and return the excess to the pouch. Heat each panel to melt the embossing powder.

Step 5


Mat each panel on a piece of coordinating cardstock with an 1/8” margin on each side.

Step 6


Stamp the sentiment onto a piece of scrap cardstock using VersaFine Clair Nocturne ink. Trim the excess cardstock and mat on a piece of black cardstock.

Step 7


Mount the largest panel onto a black card base. Adhere the other two panels over the first panel, aligning the image properly each time. Add a few Waffle Flower Stardust Enamel Dots to the card.

Step 8


Affix the sentiment to the card using double stick foam tape.

Just look at that sparkle and shine created by the Sparkle Mboss embossing powder. Simply lovely and it captures the essence of a real amethyst.

We hope you enjoyed our kick-off project in our collaboration with Waffle Flower. The most exciting part? You can WIN prizes! To enter all you need to do is subscribe to both Imagine and Waffle Flower’s YouTube channels and comment on the videos published this month using both of our products! (One comment per video per person.) Two lucky winners will win $50 gift certificates – one from each sponsor.


Supplies


Imagine
Other
  • Waffle Flower – Bouquet Builder 3, Stardust Enamel Dots
  • Cardstock – white, 2 shades of purple, black
  • My Sweet Petunia – MISTI Stamp Positioning Tool
  • Double Stick Foam Tape

Learn How to Add just a Pop of Color to an Elegant Card

Posted on by

by Lori Warren

Adding just a pop of color added to a black and white project can be very dramatic. When you use Rinea Foil Paper as that pop of color, it not only adds drama, it adds a level of elegance as well.  Black cardstock, Snowflake StazOn Pigment ink and Rinea Foiled paper are the perfect combination for drama and elegance!

Skill: Intermediate
Time: 45 minutes

Directions

Step 1

Accordion fold a color piece of Rinea foil paper – I chose this bright pink color.

Step 2

Emboss that piece of foil paper using an embossing folder.

Step 3

Die cut gold foil paper medallions using 3D Impresslits Embossing Folder.

Step 4

Stamp floral images and saying onto black card front with StazOn Pigment in Snowflake.

Step 5

Stamp floral images onto smaller strip of black cardstock.

Step 6

Layer strip of stamped cardstock over piece of embossed foil paper and adhere to card front; adhere foil medallion.

Step 7

Background options 2; randomly stamp floral images onto black card front.

Step 8

Stamp floral images onto smaller strip of black cardstock

Step 9

Mount a square piece embossed foil paper to black foil paper; adhere to card.  Adhere stamped strip of cardstock and foil medallion over the squares.

Supplies

Imagine
Other
  • Rinea – Double sided foiled paper
  • Sizzix 3D Impresslits Embossing Folder – Medallion
  • Cuttlebug Embossing Folder – Spots n Dots
  • Hot off the Press – Botanical Blooms stamps
  • Black Cardstock
  • Scissors or paper trimmer

Create a Beautiful Wedding Dress Card with Heat Embossing on Rinea Foil

Posted on by

by Jessica Lin

Create a Beautiful Wedding Dress Card with Heat Embossing on Rinea Foil

Hey there, crafty friends! Today, I have an exciting wedding card project to share with you. I’m a big fan of stretching my craft supplies and finding new, creative ways to use them. In today’s video, I’m teaching how you can combine dry and wet embossing on Rinea Foil Paper to create a new technique! It’s simple, but there are no limits to what you can create because you can choose from a wide array of embossing folders and embossing powders. I hope you feel inspired to give this technique a try. If you liked it, be sure to leave a like or comment to let me know!

Skill: Advanced
Time: 1 hour

Supplies

Imagine
Other
  • Rinea Foil Variety Pack – Metallics
  • EK Success Anti-Static Powder Tool
  • Heat Gun
  • Stampin’ Up Wonderful Moments
  • We R Memory Keepers Next Level Embossing Folder – Bouquet
  • Stampin’ Up Embossing Folder – Country Floral
  • Cardstock – White, Navy, Jade

See How to Heat Emboss on Rinea Foil Paper

Posted on by

by Martha Lucia Gomez

Hi there, Martha Lucia here! Today I am featuring one of my favorite techniques, heat embossing over Foiled Paper. During this month the teams of Imagine and Rinea are working together to promote the combination of these brands. The base of my card is Sahara sand card stock and the second layer is Mocha/Gold Glossy Rinea Foil Paper. Let me share with you the entire process.

Skill: Intermediate
Time: 30 minutes

Directions


Step 1

Cut the base of your card. Mine is 4-1/4″x11″ with the score in 5-1/2″. Cut a second layer using your favorite color of Rinea Foiled Paper. Mine is Mocha/Gold Glossy. Select the embossing folder that you want to use. Mine is Tile Patterned from Darice. Ink a brayer with VersaMagic Cloud White or any pigment ink. The brayer will make the color uniform.


Step 2

Ink the de-bossing side of the folder with VersaMagic Cloud White or any other pigment ink. Rub the Rinea foiled paper with an anti-static bag or embossing buddy.


Step 3

Put the Rinea foiled paper inside of the inked embossing folder and pass it through your die cut machine.  Remove the embossed foiled paper and cover it with white embossing powder. Melt the powder with the heat tool, taking care of not burn your foiled paper.


Step 4

If you consider necessary to make a few retouches of the embossed layer, you can use the VersaMark pen and cover the area with the same color of embossing powder. In this case, white.


Step 5

Paste the embossed layer over the card base and finalize the decoration of your card. I decided to add a thick word die cut and for that, I cut several layers of the die-cut in card stock and one on Marigold Starstruck Rinea Foiled paper.  I am using the With Love Word Die from Lil’Inker Designs.


Step 6

Paste and stock all the word die cuts using On Point Glue.


Step 7

Paste the decorated word over your decorated card with glue dots.

Supplies

Imagine
Other
  • Rinea Foiled Paper – Mocha Gold Glossy, Marigold Starstruck
  • Cardstock
  • Darice – Embossing Folder Tile Pattern
  • Lil’Inker Designs – “With Love” die
  • Big Shot or Die Cutting Machine
  • Brayer

Repurpose Old Tea Bags into a Beautiful Garden Theme Card

Posted on by

by Iris Rodriguez

Repurpose Old Tea Bags into a Beautiful Garden Theme Card

Got tea? I do and I like to make and create with them in new ways such as these collaged garden-themed cards. I find teabags versatile, translucent and luminous. When colored with All-Purpose Inks, the color on the tea bags are intense, yet they maintain their delicate vintage look. I enjoyed making this crafting project—not only are you making cool cards, but you are upcycling your teabags too!

Skill Beginner
Time: 45 minutes

Directions


Step 1

Begin by cleaning out your teabags. Take them apart by removing the tiny staple or string. Rip open the seams. Take out the dried leaves by sloughing it off. Brush on watered-down All-Purpose inks. Allow the bag to dry naturally or use a heat tool to dry.


Step 2

Continue to paint more teabags using the various colors of All-Purpose Ink. Allow the bags to dry naturally or use a heat tool.


Step 3

Now that all the teabags are dry, make your collage pieces onto the main card.


Step 4

Tear pieces of the bags; ensuring to fit the card. Brush on Creative Medium on the backside


Step 5

Adhere teabag pieces onto to the main card continuing to paste with Creative Medium on the top. Use various colors to vary the look. In the above example, I used Rose Gold and Thyme (green).


Step 6

Stamp on the images using the Piano Black StazOn Pigment Ink. StazOn will stamp on top of the dried Creative Medium. Other water-based inks might take a long time to dry and would not stamp well on the Creative Medium (non-porous).


Step 7

Draw in the border with a pencil. Get creative with the border; add asemic writing, squiggly line, circles, or other doodles.


Close up of each card and the All-Purpose inks used with each one.

Supplies

Imagine

Other

  • Used tea bags
  • Cardstock – white
  • Stamps
  • Pencil
  • Paintbrush
  • Palette