Create a Copper and Teal Father’s Day Steampunk Card

by Iris Rodriguez

Create a Copper and Teal Father's Day Steampunk Card

Mother’s Day is right around the corner, but I thought I’d get a head start on a steampunk/industrial Father’s Day card. Depending on the mom – it could be for either! These projects are always fun because you get to make things look grungy and metallic with inks, embossing powders and embellishments. By altering corrugated cardboard with different craft inks, you can transform scraps into a cool background. See how I made it!

Skill: Intermediate
Time: 1.5 hours

Directions


Step 1

Select a piece of corrugated cardboard.


Step 2

Spray Ink Potion No. 9 onto the corrugated cardboard. This helps the ink spread evenly and reduces harsh spray splotches. Spray Walnut Ink on the corrugated cardboard randomly. The ink will seep into the crevices. This imitates a timeworn metal look. To remove ink from the crevices use a dry brush to lift up the ink, then dry onto a paper towel. Dry paper.


Step 3

Rip the top and bottom edges.


Step 4

Ink the corrugated cardboard with Champagne Delicata and Turquoise Gem VersaMagic inks on the raised surface. The Turquoise Gem ink imitates a patina look while the Champagne ink imitates bits of metal shining through. Dry paper.


Step 5

Ink the edges with the Rich Cocoa Memento Luxe ink. Dry paper


Step 6

Ink gears with VersaMark ink, add Imagine’s Embossing Powder in Gold and heat set. Repeat this step using the Celestial Copper and Silver embossing powders.


Step 7

To vary the look of the gears, create a patina and copper gear. Ink the gear with Turquoise Gem VersaMagic ink.


Step 8

Add Imagine’s Embossing Powder in Copper on random areas.


Step 9

Add Imagine’s Embossing powder in Clear to the rest of gear and heat set


Step 10

Ink the card’s edges with Turquoise Gem VersaMagic Ink. Dry paper. Ink small areas randomly with the Celestial Copper Delicata ink.


Step 11

Adhere corrugated cardboard front to the card.


Step 12

Adhere nailheads, studs, and gears. Stamp a “Happy Father’s Day” sentiment and cut out into a rectangle shape. Add small metal studs on the four corners of the sentiment card and mount to the front of the card. Essentially the card is finished at this point but you can continue to add little details to make it your own! Happy grungy cardmaking!

Supplies

Imagine
Other
  • Cardstock
  • Corrugated cardboard
  • Creative Embellishments – Chipboard Gears (1, 1.25. 1.5 inches); ‘Loose Parts’ set
  • Nailhead and stud metal embellishments
  • Happy Father’s Day sentiment stamp

Color of the Month for May is Lime!

Color of the Month for May is Lime!

The Color of the Month for May is Lime. We are excited about this color challenge because we have a couple of bright green color swatches in the Tsukineko brands such as VersaFine Clair in Verdant, Brilliance in Pearlescent Lime, and All-Purpose Ink in Green Apple that are wonderful inks for your crafting projects. We think this Lime color is a fresh color to bring in the summer vibes. Create craft projects with floral images, picnic and food images or elements in a simple scrapbook layout.

Another fun feature of the Month of May is Project Swap! We wanted to do a different kind of art challenge and for this month. We matched up two of our artists and had them switch tutorials and create each other’s work or ideas. It has been a real treat to see the fun interaction between our team members and we are excited to publish the results.

Here is a sneak peek of a Couple of Swapped Projects!

Another event to look forward to in May is a Blog Hop!

We have teamed up with Precious Remembrance Shop for a Blog Hop on May 16th – 17th! So stay tuned for the details!

Create a Fun and Fabulous Summertime Flamingo Card

by Kyriakos Pachadiroglou

Create a Fun and Fabulous Summertime Flamingo Card with VersaMagic inkpads

It is almost Summer! It is time to start looking ahead for calming moments in warm weather, summer colors and holiday memories. In today’s cardmaking project, evoke the spirit of summer with this flamingo theme “chill” card. Keeping the whiteness of the paper as the basic background color, I emphasize the pastel colors and give a bright outcome on the card. The VersaMagic inkpads allow the metallic wire and beads to show even more by giving a chalk effect on all surfaces.

Skill: Beginner
Time: 1 hour

Directions

VersaMagic DewDrop in Thatched Straw and Key Lime
Step 1

Emboss a 4 x 6-inch piece of white cardstock with the stripes embossing folder and lightly color with the VersaMagic DewDrop in Thatched Straw and Key Lime.


Step 2

Use a BrushStix to mix and color the flamingo plywood shape with the VersaMagic DewDrop in Red Magic and Thatched Straw.


Step 3

Continue by coloring the paper flowers with VersaMagic in Red Magic and Thatched Straw.

VersaMagic DewDrop Key Lime and the Fabrico Marker. Use a stylus to shape the leaves into a more realistic look.
Step 4

Die cut leaves from white and kraft cardstocks and decorate them with the VersaMagic DewDrop Key Lime and the Fabrico Marker. Use a stylus to shape the leaves into a more realistic look.

Color the "chill" wooden element with VersaMagic Red Magic.
Step 5

Color the “chill” wooden element with VersaMagic Red Magic.


Step 6

Make circles with the jewelry wire and glue them in the 4 x 6-inch card with a glue gun.


Step 7

Continue with the rest of the embellishments and using either the glue gun or Tear It Tape. Lightly ink the edge of the card panel with VersaMagic in Red Magic to match the flowers. Mount the 4 x 6-inch piece on the front of a 5 x 7 card base.

Supplies

Imagine
Other
  • 5 x 7 white card
  • Cardstock – white, kraft
  • Plywood embellishments
  • Paper flowers
  • Jewelry beads
  • Jewelry wire
  • Glue gun
  • Embossing folder – stripes
  • Sizzix – Leaves, Garden dies
  • Embossing machine

Make a Card with VersaMagic Mango Madness

by Iris Rodriguez

Make a Card with VersaMagic Mango Madness. cardmaking tutorial. Spring time blooming flowers theme.

This month’s color at Imagine is Mango. Do you like mangoes? They are delicious. I like plain mangoes, mango juice, even mango in my summer salads. After creating today’s project, I can add to my list of mango appreciation VersaMagic Ink in Mango Madness. As I started using this beautiful color, I soon realized I could not stop at just coloring my tree; I also colored white paper flowers and a butterfly with this ink as well. You could say I had a Madness for this Mango Ink.

Skill: Intermediate
Time: 1.5 hours

Directions


Step 1

Spray the paper with water. Spray with Fireworks Shimmery Craft Spray in Summer Sky. Dry paper.


Step 2

Ink the paper with VersaMagic in Aegean Blue, Thatched Straw and Memento Luxe in Wedding Dress using the Sponge Dauber, Inkblusher, and Smudgee.


Step 3

Using a Sponge Dauber ink through the flowering tree stencil with the VersaMagic in Mango Madness. Emboss using Clear Embossing Powder. Place the stencil over the image again and ink through the stencil with the VersaMagic in Mango Madness. Emboss the image with the Sparkle Embossing Powder.


Step 4

Ink a scrap piece of watercolor paper on one side ink with VersaMagic in Thatched Straw and the other half ink the VersaMagic in Mango Madness. Emboss both colors using the Clear Embossing Powder. Punch out the butterfly with each ink color.


Step 5

Layer one butterfly over the other, adhere together with On Point Glue. Stamp the word “hello” on a piece of paper, cut a tag shape around the sentiment. Punch a hole in the center. Tie a piece of embroidery thread on the butterfly and tag.


Step 6

Ink VersaMagic in Thatched Straw on the Craft Mat, spray water and dip paper flowers in it, ensuring to completely color the flowers. Dry the flowers.


Step 7

Ink VersaMagic in Mango Madness on the flowers. Glue the flowers, butterfly, and tag onto the tree background using On Point Glue. For the yellow background paper, cut a piece of paper a little bigger than the main card, and ink the out edges with VersaMagic in Thatched Straw. Assemble the card by mounting the flowering tree stencil card panel to the yellow background card base.

I hope you are mad about this month’s color the way I was and give this project a try.

Supplies

Imagine
Other
  • Watercolor paper – 12 x 9 inches Cold Press, 300 GSM – 140 lbs
  • Deco Arts – Flowered Tree stencil
  • Paper flowers
  • Martha Stewart – Butterfly paper punch
  • Paper hole punch – 1/16 inch

Watch a Video Tutorial on How to Watercolor a Beautiful Yellow Rose

by Arjita Sepaha Singh

Do you have a friend who you would like to show appreciation? Water coloring stamped images is my favorite cardmaking style and I am always on a hunt for new mediums to use for the water colored effect. In this video, I used Altenew stamps, Gold embossing, and Fireworks Shimmery Craft Sprays to create this beautiful yellow rose friendship card and it turned out very pretty. This is a great crafting project for a best friend gift or to show someone you care.

Supplies

Imagine
Other
  • My Sweet Petunia – Misti Stamping Tool
  • Powder tool
  • Heat gun
  • Watercolor paper
  • Altenew – Floral Stamp set

Helpful Tips and Tricks: How to Take Amazing Photos of Craft Projects

by Martha Lucia Gomez

Helpful Tips and Tricks: How to Take Amazing Photos of Craft Projects

With the ever-growing popularity of social media platforms, particularly Instagram, crafters have been talking about how to take better photos of our projects. Since not all of us are professional photographers, and we don’t all have “the perfect tools”, I would like to talk about how to take great photos of your work without having to be a pro-photographer.

Style your photos creatively

These are important elements to focus on when taking a photo of a project:

  • the backdrop or background
  • main focus – which is always your project
  • props or supporting elements to make the focus shine
  • the camera

Backgrounds

With clear and simple photos you need to have a neutral base or background, like white, grey, ecru, cream or even brown tones like wood. Since most of us don’t have professional lighting, set your background up where it is in natural light, and make sure it is a large enough base to place your card or project. Try using dark colors in the background to help the project colors pop.

You can set up your background so that your project can be laid flat or standing up. I find that I can capture more details by taking photos of my cards flat on a surface with the camera located directly above it. Also, if you have a small space to take your photos, this option is perfect because it requires less space and can make it easier to incorporate other elements.

With flat photos, remember your backdrop is the most important part. If you are creative you don’t need to buy expensive elements, you can use everyday household items and surfaces as the background. The most important thing is to keep in mind the colors and textures. A brightly colored element next to your project can round out the scene and support the focal point, but being able to use it as the background will be trickier, tho can work on occasion.

You can use wood surfaces, floor boards, ceramic tiles or designer textured papers, as well as other supplies to add some depth to the photos. You can also use elements like designed plates, which can be easily found in home decor stores. My favorite is HomeGoods because I can buy just one plate, placemat or napkin. Neutral colored fat quarters found at the fabric store is another cheap option.

Supplies or Photo Props

With staging photos, it is nice to add a few elements alongside your card or project—but these cannot compete with the main focus object i.e. your crafting project. You can use many items as photo props. I use a lot of flowers and greenery, my favorites are made of silicone because the fabric flowers don’t look real to me. But definitely, my favorites photo props are the craft supplies. Supplies like inks, stamps, stencils, color pencils or markers, and die cuts are perfect elements to support your project. Extra embellishments like buttons, sequins, washi tape and twines are also great, but always be careful with the color combinations. My suggestion is to start with the neutral items first that won’t compete with your project. If you still aren’t finding what you like, just look around your home and you might find gorgeous elements that you can borrow for a few minutes as part of your photo.

Camera

With today’s technology, you really don’t need to have a professional camera. Cell phones like the iPhone or Samsung make it possible to take amazing photos. To make them work best, use natural light source and keep an eye out for any shadows across your photo. Also, think about a good angle to take the photo. Always start by making your lens parallel to the project front, and then play with the angle from there. My last helpful hint is very simple but important: always clean the lens of your camera or phone before taking the photos. Because we touch our phones so often it is easy for the lens to become dirty.

I hope you found these tips useful. Just remember to stay open to learning new ideas and most importantly have fun! Thank you for stopping by the Imagine blog and don’t forget to share!