Tag Archives: Sheer Shimmer

Walking In A Winter Wonderland Card

Posted on by

By Anna Escalada York

Today’s card is a winter card featuring some of the new VersaFine Clair colors.

Skill: Intermediate
Time: 2 hours

Directions:

Step 1:

Watercolor smoosh a die cut watercolor paper panel with three sprays sprayed onto a piece of acetate packaging: Summer Sky and Paris Dusk Fireworks! Shimmery Craft Spray as well as Sparkle Sheer Shimmer Craft Spray.

(I accidentally smudged the upper edge of the panel with some yellow ink during the process, but planned on covering the color in the next few steps.)

After the sprays dried, the upper left corner of the panel was stamped with Very Peri VersaFine Clair Ink using a woodblock rubber stamp. The ink was then heat embossed with clear Mboss powder.

Step 2:

Color small pieces of watercolor paper (or in my case watercolor paper scraps) with a variety of greens: Spruce and Grass Green VersaFine Clair ink and New Sprout Fireworks! Shimmery Craft Spray. The scrap on the left was sprayed multiple times with the Fireworks! Spray and set aside to dry; the two straps on the right were pressed directly into the two ink pads until the whole scrap was colored with the ink. While there was a small space on the dark green tree (on the lower right in this picture) left uncolored, I knew that it would be covered up in the next few steps.)

After all of the papers had dried, I die cut the three small pieces of watercolor paper with three different tree dies.

Step 3:

Color three more scraps of watercolor paper with Pear Tart Memento Double Marker and Emerald Fabrico Dual Marker. After the markers had dried, these three scraps were die cut with three more tree die cuts.

Step 4:

The layers of the dies were glued together. Then Sparkle Sheer Shimmer Craft Spray was sprayed onto more acetate packaging and used to paint sparkle onto the trees.

Step 5:

Ink blend the edges of the panel with Neptune VersaColor Ink until it reaches the saturation of color desired. Heat emboss with more of the clear Mboss powder.

Step 6:

Glue the three die cut trees onto the panel. Splatter with gold watercolor.

Step 7:

Stamp the sentiment on a piece of watercolor paper with Spruce VersaFine Clair Ink and heat emboss with clear Mboss powder. Trim the paper with a paper trimmer. Distress the edges with a pair of scissors. Then press the edges of the sentiment strip into the Grass Green VersaFine Clair Ink pad. After the ink dried, paint the edges with more of the gold watercolor. Set aside to dry.

Step 8:

Spray New Sprout Fireworks! Shimmery Craft Spray directly onto an embossing folder. Place a die cut watercolor panel into the embossing folder and run it through a die cutting machine. Set the panel aside to dry.

Step 9:

Distress the edges of the panel with scissors. Run the edges of the panel through the Spruce VersaFine Clair ink pad to add ink directly to the edges. Then ink blend the edges with more of the Spruce VersaFine Clair Ink pad using a sponge dauber.

Step 10:

Watercolor the embossed panel with more of the gold watercolor and allow to dry.

Step 11:

Add a strip of black and white polka dotted washi tape onto the green panel. (The washi tape I used is very wide, so I ripped it into a thinner strip before attaching it to the card panel.)

Glue the smaller (blue) panel onto the larger, green panel at an angle. Glue star sequins onto the blue panel. Finally, glue the whole thing onto an A2-sized white card base.

Art Supplies

Imagine

• Fabrico Dual Marker – Emerald
• Fireworks! Shimmery Craft Spray – New Sprout, Paris Dusk, Summer Sky
• Mboss – Clear
• Memento Dual Marker – Pear Tart
• Sheer Shimmer Craft Spray – Sparkle
• VersaColor Ink – Neptune
• VersaFine Clair ink – Grass Green, Spruce Versa, Very Peri Sponge
• Sponge Dauber

Other
• Altenew – die set – Tree Mix
• Gina Marie Designs – die set – Big and Little Chain Rectangles
• Gina Marie Designs – die set – Pleated Lace Rectangles
• Hero Arts – woodblock stamp – Stunning Snowflakes (retired)
• Kat Scrappiness – sequins – Winter Wonderland mix
• Kuretake – watercolors – Starry Colors
• Sizzix – embossing folder – Jeweled Snowflakes (664489)
• Stampers Anonymous – stamp set – Cozy Christmas
• Watercolor paper
• Die cutting machine Paint brush
• Paper trimmer
• Scissors
• Glue

Quick & Easy Christmas Cards using Ornament Punches

Posted on by

By Jessica Lin

Skill Level: Beginner
Time: 30 minutes

Hi everyone, it’s Jessica here. Quick & easy cards are so fun to make, and they are perfect for holiday mass production too! I made several versions today using some punches, and I hope you’ll enjoy this quick tutorial.

Step 1:
Use Stampin’ Up!’s Gleaming Ornaments punches with patterned paper to create the christmas ornaments. Each ornament needs two pieces; one unscored and one scored in the middle.

Step 2:
Apply On Point Glue onto the folded crease (backside of the patterned paper) and adhere to the unscored punch piece. Hold in place for 20-30 seconds while the glue dries.

Step 3:
Prepare 3 pieces of cardstock and adhere them together with Tear It Tape. The largest size measures 2 3/4‘’ x 4 1/4‘’, the medium size measures 2 5/8‘’ x 4 1/8‘’, and the small size 2 1/2‘’ x 4’’.

Step 4:
Attach a piece of gold thread to the back of the ornament with Tear It Tape, and adhere to the layered background. Attach the other end of the gold thread to the back of the green cardstock layer.

Step 5:
Adhere tiny bows to the top of the ornaments with glue dots.

Step 6:
Stamp the sentiment on black cardstock using StazOn Pigment ink. Adhere both the sentiment strip and the layered panel to the card base with Tear It Tape.

Step 7:
For the second version of the christmas card, I used the negative pieces from the punches and layered red, embossed cardstock underneath. Generously apply the Sheer Shimmer Stix in sparkle to add additional shimmer.

Step 8:
Adhered the patterned paper pieces onto the card base and stamp the sentiment using VersaFine Clair Nocturne ink. For a finishing touch, splatter on gold acrylic paint with a paint brush.

Imagine Supplies:

Other Supplies:

  • Stampin’ Up! – Punch – Gleaming Ornaments Punch Pack
  • Stampin’ Up! – Stamps – A Wish for Everything
  • We R – Tool – Precision Press
  • Gold thread
  • Thin red ribbon
  • Glue Dot
  • White, green, red, black cardstock

Watercolor with VersaMagic, Brilliance and Delicata Ink Pads

Posted on by

By Jessica Lin

Skill: Beginner
Time: 45 minutes

Hi everyone! It’s Jessica here and welcome back to another card tutorial. Thanksgiving is coming up and I love to make cards to express my gratitude! Today I’m also watercoloring with various ink pads from the VersaMagic, Brilliance and Delicata ink lines. Let’s begin!

Step 1: Stamp the critter images from The Greeting Farm Wood Friends stamp set with VersaFine Clair Nocturne ink. This is my favorite black ink for stamping and it’s perfect for watercoloring.

Step 2: Color the images with VersaMagic inks. I used Gingerbread, Pumpkin Spice and Wheat for the deer, and to add some shimmer and shine, I watercolored a layer of Celestial Copper from the Delicata ink line. For the squirrel, I used Sahara Sand and Jumbo Java as the base color and added Cosmic Copper Brilliance ink as an accent. VersaMagic, Delicata, and Brilliance ink pads are all pigment inks and I love that you can mix and match the colors for maximum creativity. For the final touch, I added small amounts of Pink Grapefruit to create their rosy cheeks.

Step 3: I decided to use Stampin’ Up!’s Mossy Meadow cardstock as the cardbase since it’s a nice foresty color. I also stamped some geometric striped pattern with my VersaMark ink pad. Did you know that you could stamp with VersaMark as well? It’s known for being the best ink for heat embossing, but I also stamp with it quite often to create additional interest to the background.

Step 4: Then I spritzed on a layer of Sheer Shimmer Spray in Sparkle. I wish you could see the shimmer in real life! The photo does not do its justice. The shimmer is just so beautiful and it truly transformed this simple card base.

Step 5: Next, I die cut an oval panel as a frame for the little critters, and I die cut the Grateful sentiment from gold glitter cardstock as well.

Step 6: To make the sentiment stand out a little bit more, I die cut again using white cardstock and layered it underneath the gold one. This creates a subtle shadow effect. The On Point Glue has a fine tip nozzle that makes applying small amounts of glue so easy. If you work with intricate dies all the time, I recommend having this glue in your stash!

Step 7: Finally, I stamped the “For You” stamp in gold as well to complete the sentiment. Initially I picked the Brilliance Galaxy Gold ink pad as it is my go-to gold ink, but I realized that the tone is slightly too warm compared to the gold glitter cardstock I used. So I

re-stamped with Gold Encore ink instead. I have a close-up comparison below as well.

The picture on the top used Brilliance Galaxy Gold and the one below used Encore Gold. Brilliance Galaxy Gold is a really yellow, sunny kind of gold while Encore Gold shows a cooler tone. The finish is different between the two as well! Brilliance ink pads are shimmery and the Encore line is metallic.

Craft Supplies

Imagine Supplies:

Other Supplies:

  • The Greeting Farm – Stamps – Wood Friends
  • Lawn Fawn – Dies – Stitched Oval
  • Stamplorations – Dies – Grateful
  • Stampin’ Up! – Cardstock – Mossy Meadow
  • We R – Tool – Precision Press
  • DCVW – Cardstock – Gold Glitter
  • White and Watercolor cardstock

“Wishing You A Happy Birthday” Card

Posted on by

By Anna Escalada York

In today’s post, I am sharing a fun, summer card that features some bold colors!

Skill: Intermediate
Time: 1 hour

Directions:

Step 1
Color a piece of acetate packaging with both Cottage Ivy Memento marker and Emerald Fabrico
marker and then spraying the acetate with water. Press the acetate onto a piece of watercolor
paper multiple times, moving the acetate around so add green color around the watercolor
paper. Allow the water to dry.

Step 2
Die cut the watercolor smooshed paper with a circular die cut. Add a small dot of Pink Ultimate
Pigment Pigment Refill into the raised areas of an embossing powder, and then spray the
embossing folder with Sparkle Sheer Shimmer Craft Spray to both help the watercolor paper
stay moist (so it won’t tear) while embossing, and to help dilute the condensed pink refill ink.
Then sandwich the watercolor paper into the embossing powder and run it through a die cutting
machine.
After the watercolor paper has dried, ink blend the edge of the circular die cut with Pink
VersaColor pigment ink.

Step 3
Die cut another piece of watercolor paper with a slightly larger circular die. Directly press the
Pink VersaColor Pigment ink pad onto the watercolor paper.
Optional step: Heat emboss the ink with clear embossing powder.

Step 4 (and 4.5)
Stamp an image onto watercolor paper with a nature scene with Nocturne VersaFine Clair ink.
Heat emboss with clear embossing powder.
Using a variety of media to watercolor the image: Celestial Copper Delicata Ink pad mixed with
water to color the rocks, Emerald Fabrico marker mixed with water to color the frog and leaves,
Bahama Blue Fireworks! Spray to color the sky and water, and Pink Ultimate Pigment Ink Refill
to color the flower petals. Finally, color the centers of the flowers with a Dandelion Memento
marker.

Step 5
Watercolor smoosh some of the leftover inks from the last step to watercolor smoosh a piece of
watercolor paper and then spray the whole thing with Sparkle Sheer Shimmer Craft Spray. Use
some additional color to stamp a text stamp in my stash to add a little interest onto the panel by
pressing the stamp into the acetate instead of an ink pad. Repeat the process a few times until
you like the amount of extra interest that is added. After everything dried, die cut the watercolor
panel.

Step 6
Glue the two circular die cuts (the embossed panel and the larger pink die cut circle)
and then glue it onto the watercolor background panel. After the glue dried, the whole thing was
die cut again to trim the circular die cuts. The edges were ink blended with more Pink
VersaColor Pigment ink. Splatters of the remaining Bahama Blue Fireworks! Spray from the
acetate packaging were added to the panel as well.

Step 7
Stamp a sentiment with Nocturne VersaFine Clair ink.

Optional step: Heat emboss with clear embossing powder.

Step 8:
Die cut sparkly white paper with a slightly larger rectangular die. Glue the main (frog)
stamped and die cut image onto the top panel, glue the matte (sparkly larger panel) behind the
top panel and then glue everything onto an A2-sized white card base. Glue sequins to the card
base.

Art Supplies

Imagine

• Delicata Ink – Celestial Copper
• Fabrico Marker – Emerald
• Fireworks! Spray – Bahama Blue
• Memento Marker – Dandelion
• Memento Marker – Cottage Ivy
• Sheer Shimmer Craft Spray – Sparkle
• Ultimate Pigment Ink Refill – Pink
• VersaColor Pigment ink – Pink
• VersaFine Clair ink – Nocturne
• VersaMark Dazzle – Frost

Other
• Catherine Pooler Designs – Sequins – Milwaukee
• Gina K Designs – Dies – Master Layout 2 die set
• Hero Arts – Dies – Nesting Circles Infinity die set
• Penny Black – Stamp – Thanks, Thanks stamp (retired)
• Vicki Boutin – Embossing Folder – Let’s Wander (retired)
• Watercolor paper
• Clear embossing powder
• Scissors
• Glue

Clean and Simple Mother’s Day Card

Posted on by

By Helen Gullett

Hello crafty friends! Mother’s Day is coming up soon. Sending out a handmade card is a way to show your love to a lovely mother figure in your life. Today, I would like to share with you how to make this Mother’s Day CAS card using Imagine Crafts products and stamps.

Skill: Beginner
Time: 15-20 minutes

Direction:

Step 1
Cut a piece of watercolor paper into 6 inch x 5 inch size. This size fits on my stamping tool. Then, stamp the image on the watercolor paper with Versafine Onyx Black ink pad.

Step 2
Dab some of the Memento DewDrop Inks (Rose Bud, Bamboo Leaves, New Sprout, and Summer Sky) on the craft mat.

Add a couple drops of water from the waterbrush on the ink to turn it into watercolor paint. Pick up the ink with the waterbrush and paint the flower and vase.

Dry the painted image with a craft heat gun.

Step 3
On a piece of white cardstock, add some of the Lulu Lavender ink using the blending brush.
Build up the color from darker to lighter to create the gradient look on the background.

Step 4
Once done with adding color on the cardstock, lightly spray some of the Sparkle Sheer Shimmer Craft Spray. And then use a small flat brush, add some extra splatter on it for more texture.

Using a craft heat gun, dry the background panel.

Step 5
Fussy cut the flower with micro-tip scissors.
Optional: you can use a die if you use a stamp set that has a matching die set.

Step 6
Stamp the sentiment on a white cardstock using the VersaFine Clair Nocturne, dry the ink with a craft heat gun, and then cut it into a sentiment banner with scissors or paper cutter.

Step 7
Add the background panel on an A2 card base using the Tear It! Tape.
Add the flower and sentiment to the card using the On Point Glue.

That’s my project for today. Hopefully, you’ll like this project and give it a try. Thanks so much for stopping by our blog today. Have a wonderful day!

Craft Supplies

Imagine Crafts:

Others:

  • Altenew – Breeze Bouquet Stamp Set
  • Canson Watercolor Paper 140lb
  • Micro-tip Scissors
  • Fiskar paper trimmer
  • Acrylic stamping blocks
  • Small Round Waterbrush
  • Flat paint brush or fan brush
  • Oval Blending Brush
  • Craft Heat Gun
  • MISTI stamping tool

Let’s Make a Pantone Peach Fuzz Colored Card

Posted on by

By Anna Escalada York

In today’s blog post, I will show you how to incorporate sprays and markers to change or
enhance the color of colored cardstock to help you stretch your supplies.

Skill: Advanced
Time: 2 hours

Directions:

Step 1:
Color a piece of teal or green patterned paper with green markers–College Ivy Memento marker
and Emerald Fabrico marker.

Step 2:
Die cut the colored patterned paper to form the leaves of the flower die cut.
Optional step: Spray the colored patterned paper with Sparkle Shimmer Spray.

Step 3:
Spray a die cut panel of watercolor paper with Angel Pink and Cantaloupe Fireworks! Sprays.
After it dried, I sprayed both sprays again. This combination of the two colors almost achieved
the peach fuzz color.

Step 4:
Using a piece of peach cardstock, die cut the small flowers for the floral die cut three times.

Step 5:
Stamp Pink Shimmer Delicata ink onto the flowers using a stamp. (On the card, you can see a
little shine on the flowers, but it ins’t visible in pictures.)

Step 6:
Add Pink Shimmer and Gold Glitz Delicata Ink onto parts of a large background stamp. Make
sure to leave parts of the stamp uninked (such as the lower left corner of the stamp).
Optional step: Add holographic embossing powder onto the stamped image.

Step 7:
Use Tangelo and Morocco Memento markers to color a smaller stamp and repeatedly stamp
card base to add texture.

Step 8:
Die cut the main sentiment out of more of the peach colored cardstock and the shadow die out
of some peach patterned paper. Spray the sentiment with Sparkle Sheer Shimmer spray and
the shadow paper with Cantaloupe and Angel Pink Fireworks! sprays. After the sprays dry, glue
the two layers together.

Step 9:
Glue the floral die cut pieces together.

Step 10:
Create the matte layer of the card by die cutting a piece of orange patterned paper and then
spraying it with more of the Cantaloupe and Angel Pink Fireworks! Sprays and Sparkle Sheer
Shimmer spray to mute the bold orange color.

Step 11:
Glue the floral die cut and the sentiment onto the upper card base. Trim off the right edge of the
sentiment so that it doesn’t overhang the upper card panel. Then glue the matte (orange) panel
behind the upper panel.

Step 12:
Stamp the sub sentiments with by coloring them again with more Morocco Memento marker.
(The sub sentiments came in 3 parts “I am,” “you are” and “going through this.” Since the last
sentiment wouldn’t fit on the card without a little help, I performed “stamp surgery” where the
stamp was cut before stamping to create two smaller stamps. If you are uncomfortable with this,
you can mask part of the stamp and stamp the sentiment a couple of times if you are trying to
create something similar.)

Step 13:
Glue the card panel onto an A2-sized white card base and then glue a few rhinestones around
the flowers and the sentiment.

Art Supplies

Imagine:

Other:

  • Simon Says Stamp – die cuts – Fine Foxglove
  • Simon Says Stamp -stamp- Document It
  • Honey Bee Stamps – stamp – With Sympathy
  • Honey Bee Stamps – die cuts – With Sympathy
  • HAI Supply – gem embellishments – Crystalline Grapefruit
  • My Colors Cardstock – paper – Peach
  • Echo Park – paper – Easter Tweetings
  • Embossing powder in my stash
  • Patterned paper (orange and teal) in my stash
  • Watercolor paper
  • Scissors
  • Glue