Make a Cheery Birthday Card Using Fireworks! Shimmery Sprays

2021-Aug-Neva-Fireworks!-Bday-card-step7

By Neva Cole –

In today’s card making tutorial, I will show you how to use your Fireworks! Shimmery Spray inks in different ways rather than just spraying them!  All of the blooming sunflowers during my travels were the inspiration for this late summer birthday card.  It is very cool that sunflower heads follow the sun throughout the day, and they are always bright and cheery!

Skill:  Intermediate

Time:  1.5 hours

Directions:

2021-Aug-Neva-Fireworks!-Bday-card-Step1

Step 1

Stamp sunflower image in Delicata Golden Glitz and heat emboss with Iridescent Embossing Powder.  The Delicata Golden Glitz is one of the brightest gold inks, and works best for a sunflower.  Die cut with an electronic die cut machine, or fussy cut with scissors.

2021-Aug-Neva-Fireworks!-Bday-card-Step2
Step 2

Use a brush tip Fantastix to color in the center of the sunflower with Delicata Black Shimmer.

2021-Aug-Neva-Fireworks!-Bday-card-Step3

Step 3

Shake the Fireworks! spray until all of the shimmer is mixed in.  When the spray sits for awhile, the shimmer settles to the bottom and can be seen as a thin layer through the bottle.  Remove the spray lid and tap a bit of Fireworks! on your work mat from the end of the plastic tube.  Use a fine tip paint brush to paint the sunflowers a beautiful iridescent Dandelion Yellow.  Yellow ink is one of the more difficult inks to use, and this method solves that dilemma!

2021-Aug-Neva-Fireworks!-Bday-card-Step4

Step 4

Stamp the leaf image in Brilliance Pearlescent Ivy and heat emboss with Iridescent Embossing Powder.  Using embossing powder helps maintain the original ink color of the image while painting over with Fireworks! spray.  It also allows you to color inside the lines much more easily! Use a fine point paint brush to add Fireworks! in Bamboo Leaves.  Die cut or fussy cut the leaves.

2021-Aug-Neva-Fireworks!-Bday-card-Step5

Step 5

To get a finer sprinkling of more carefully located drops of Fireworks!, use the same paint brush and gently tap over the card stock to create a fine splatter pattern.  When using the spray nozzle, the color is denser on the cardstock.  Finish the edges by inking with an ink blusher and Brilliance Pearlescent Ivy.

2021-Aug-Neva-Fireworks!-Bday-card-Step6

Step 6

Edge the base card with an ink blusher and Delicata Golden Glitz.  Using inks throughout the card allows for perfect coordination.

2021-Aug-Neva-Fireworks!-Bday-card-step7

Step 7

Position the leaves and sunflowers on the card front to determine the location for the sentiment.  Stamp the sentiment in Brilliance Pearlescent Ivy and heat emboss with Iridescent embossing powder.  Adhere the layers of the card together.  The card front and leaves are adhered with Tear-It! Tape, and the sunflowers are adhered with thin dimensional foam adhesive.

Art Supplies

Imagine
Other
  • Auntie Amy Sunflower image
  • Heartfelt Creations Bold Leaf stamp
  • Technique Tuesday Large Birthday sentiment stamp
  • Fine point paint brush

Make a Beautiful Pink Embossed Card

2021-aug-kyriakos-pink-wish-card-900-wm

By Kyriakos Pachadiroglou

– Stamp with Radiant Neon ink and partially cover with Mboss embossing powder to make a flourish background on a denim color paper. Add layers with the same design, stamped with VersaFine CLAIR inks on white card stock.

 

Skill: Beginner

Time: 1 Hour

 

Directions:

2021-aug-kyriakos-pink-wish-card-step1

Step 1

On a 4.5×6 inch piece of the denim color paper stamp the poppy pattern with the Radiant Neon ink. Ink the stamp well and press it firmly on the paper holding it for a few seconds on the paper pressed.

 

2021-aug-kyriakos-pink-wish-card-step2

Step 2

Sprinkle Mboss Metallic Berry embossing powder (don’t fully cover the pattern), remove the excess and heat set.

 

2021-aug-kyriakos-pink-wish-card-step3

Step 3

On a 3×4 ¼ inch piece of white card stock, stamp with the VersaFine CLAIR Purple delight positioning the design to the middle left on the paper. Stamp with VersaFine Charming Pink on a second piece of paper and cut along the poppy flower.

 

2021-aug-kyriakos-pink-wish-card-step4

Step 4

Stamp a wish sentiment with VersaFine Nocturne and tear the paper on all sides.

 

2021-aug-kyriakos-pink-wish-card-step5
Step 5

Set the stamped card stocks on a card base with Tear It! Tape and add a layer of it vertically on the left side to set the white satin ribbon. Repeat horizontally for the pink one.

 

2021-aug-kyriakos-pink-wish-card-step6
Step 6

Add foam tape to the back of the flower and set it on the card.

 

 

Art Supplies:

Imagine

VersaFine CLAIR – Charming Pink, Purple Delight, Nocturne

Radiant Neon – Electric Coral

Mboss – Metallic Berry

Tear It! Tape

 

Other

Card stock – white and denim color

Card base

Foam tape

Penny Black – Poppy pattern stamp

White and pink ribbons

Heat tool

 

 

Make a Beautiful Heart-Shaped Plywood Ornament

2021-aug-kyriakos-stamp-on-plywood-600-wm

By Kyriakos Pachadiroglou

Make a distressed heart-shaped plywood ornament with Walnut Inks. Color with Memento inks for a smooth result and decorate with stamps and StazOn inks for a sharp and bleedless design.

 

Skill: Beginner

Time: 1 Hour

 

Directions:

2021-aug-kyriakos-stamp-on-plywood-step1

Step 1

Paint the plywood shape with All-Purpose White ink color. Let it dry well.

 

2021-aug-kyriakos-stamp-on-plywood-step2

Step 2

Sprinkle drops of the Walnut Ink Eucalyptus, add very few Walnut Ink Crystals and spray with water to dilute further. Dry well.

 

2021-aug-kyriakos-stamp-on-plywood-step3

Step 3

Use a Sponge Dauber to smoothly add color with Memento Rich Cocoa and Pear Tart ink pads.

 

2021-aug-kyriakos-stamp-on-plywood-step4

Step 4

Stamp the foliage first with the Memento Bamboo leaves and then stamp on top, slightly offsetting to the first design, with StazOn Olive Green.

 

2021-aug-kyriakos-stamp-on-plywood-step5
Step 5

Stamp butterflies with StazOn Fuchsia pink and Royal Purple ink pads.

 

2021-aug-kyriakos-stamp-on-plywood-step6
Step 6

Add a sentiment with StazOn Jet Black.

 

2021-aug-kyriakos-stamp-on-plywood-step7

Step 7

Cut 12″ long pieces of the cotton ribbon and spay with the Walnut Inks Eucalyptus, Lilac and Cherry Blossom. Let them dry.

 

2021-aug-kyriakos-stamp-on-plywood-step8

Step 7

Tie the cotton ribbons on the heart shape.

 

Art Supplies:

Imagine

All-Purpose Ink – White

Walnut Ink – Eucalyptus, Lilac, Cherry Blossom

Memento – Pear Tart, Rich cocoa, Bamboo Leaves

StazOn – Olive Green, Fuchsia Pink, Royal Purple, Jet Black

Sponge Daubers

 

Other

Plywood Heart Shape

Kaisercraft – Tigerlily Stamps

½” Cotton Ribbon

 

 

Make a Colorful Card Perfect for Advancing to the Next Grade

2021_Jul_JowilnaNolte_School_1

By Jowilna Nolte 

– I dream in color literally. This was the case the other night when I dreamt about some alcohol ink that wasn’t alcohol ink. And so experimenting started. I used my VersaFine Clair ink pads on Yupo paper. Now technically this will never dry but here is the trick how to create that gorgeous look.

Skill Level: Beginner/Intermediate

Time: 30 minutes

Directions:

2021_Jul_JowilnaNolte_School_step1

Step 1

gorgeous colorful card perfect for advancing to the next grade.

2021_Jul_JowilnaNolte_School_step2
Step 2

I used 200gsm Yupo paper in white. Swipe the first color of ink across the paper once or twice depending on how wide you would like your strip.

2021_Jul_JowilnaNolte_School_step3

Step 3

Now continue with the second and third color of ink.

2021_Jul_JowilnaNolte_School_step4

Step 4

While the ink is still nice and wet use your blending solution and add quite a bit of it onto the ink. Let it sit for a while and then swirl the paper around to mix the colors a bit.

TIP: I also added some into a misting bottle and sprayed the inks to create small little drops of texture on it.

2021_Jul_JowilnaNolte_School_step5
Step 5

Leave to dry. I left mine to dry for a while and still had some thicker areas where the ink pooled that stayed tacky, so I simply used a clear sealant and sprayed that over the paper and left it again. It dried nicely and now all I have to do is use this gorgeous Faux alcohol ink piece of a project.

Trim your panel to fit onto the front of a folded card and adhere the panel using Tear It! Tape.

Add a vinyl decal and stamped sentiment, then finish off your card with a few scattered diamante. And in a few minutes you created this gorgeous colorful card perfect for advancing to the next grade.

Art Supplies

Imagine

VersaFine Clair Paradise
VersaFine Clair Charming Pink
VersaFine Clair Summertime
VersaFine Clair Nocturne
Tear It! Tape
On Point Glue

Other

Yupo paper
Alcohol blending solution
Die-cut: Cricut
Gold vinyl: Cricut
Die-cut machine: Cricut Maker
Embellishments
Stamps: Joy Clair

Learn to Make a Colorful Hummingbird Birthday Card

2021-Jul-Neva-Hummingbird-Birthday-Card

By Neva Cole 

In today’s card making tutorial, I will show you how to make a multi-colored layered birthday cards using a plethora of great Imagine inks.  Hummingbirds can be iridescent, so Encore! Ultimate Metallic, Delicata, and Brilliance inks are used to create a beautiful hummer.  Ombre-hued Kaleidacolor inks are used to create the frame and background.

Skill:  Intermediate

Time:  2 hours

Directions:

2021-Jul-Neva-Hummingbird-Birthday-Card-Step1

Step 1

Stamp Hummingbird outline image and flower outline image in Encore! Ultimate Metallic Green.  Using a stamp positioner will allow more precise placement while stamping layers.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step2
Step 2

Stamp next layer of Hummingbird in Encore! Ultimate Metallic Honeydew and the stem of the flower in Delicata Emerald Green.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step3

Step 3

Stamp next layer of Hummingbird and flower stem in Encore! Ultimate Metallic Green.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step4

Step 4

Stamp throat of Hummingbird in Brilliance Pearlescent Purple.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step5

Step 5

Use a Memento Dual Tip Marker in Tuxedo Black to color eye.  Die cut with matching Frame Cut.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step6

Step 6

Stamp the layers of the flower with Versa Color Heliotrope, Violet, and Orange.  Die-cut with matching Frame Cut.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step7

Step 7

Trim cardstock to 3 1/2″ x 8 1/2″.  Use a foam brayer to ink the cardstock with Kaleidacolor in Fresh Greens.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step8

Step 8

Die-cut Foliage Frame.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step9

Step 9

Trim cardstock to 7 1/8” x 8 ½” and fold in half.  Use a foam brayer to ink the cardstock with Kaleidacolor in Blue Breeze.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step10

Step 10

Place Foliage frame over blue background to determine position for sentiment.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step11

Step 11

Stamp sentiment in the darkest color from the Kaleidacolor Blue Breeze ink pad.  It is easiest to do this with the pad expanded to get just the end inked section of the Kaleidacolor pad.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step12

Step 12

Adhere layers of card together.  The Foliage frame is adhered with thin dimensional foam adhesive. The upper and lower flowers are adhered with On Point Glue, and the middle flower to thin dimension foam adhesive.  The hummingbird is adhered with thicker dimensional foam adhesive.

Art Supplies

Imagine
Other
  • Hero Arts Color Layering Hummingbird & Frame Cuts
  • Kat Scrappiness Slimline Card Foliage Frame
  • Sponge brayer
  • Dimensional Foam Adhesive
  • Stamp positioner

How to Create a Fun and Colorful Birthday Card

2021_Jul_JowilnaNolte_Birthday_main

By Jowilna Nolte 

When I think of all my favorite inks I think of how well they can work together. There’s no better way to create interest than combining different types of inks together for some stunning effects and making easy striking cards.

For this card I simply used a single ink splat stamp and combined it with my favorite inks for a stunning end result.

Skill Level: Beginner

Time: 20 minutes

Directions:

2021_Jul_JowilnaNolte_Birthday_step1

Step 1

Combine VersaFine Clair and Memento Luxe inks in the same color to stamp layers. For my first color I combined the yellow inks – first stamping Golden Meadow VersaFine Clair and then on top I stamped Dandelion Memento Luxe.

All my stamping was done in a bit of a diagonal line.

2021_Jul_JowilnaNolte_Birthday_step2
Step 2

Repeat the process using Verdant VersaFine Clair and Pistachio Memento Luxe.

2021_Jul_JowilnaNolte_Birthday_step3

Step 3

Repeat the stamping using Warm Breeze VersaFine Clair and Teal Zeal Memento Luxe.

2021_Jul_JowilnaNolte_Birthday_step4

Step 4

Lastly combine the red by first stamping Glamorous VersaFine Clair and then finish off with Love Letter Memento Luxe ink.

Step 5

Trim your stamped panel to fit into a folded card base. Cut a vinyl holographic sentiment and adhere to your card. I off-set mine with a white die-cut piece for a shadow effect and dimension. Finish off with some diamante.

Art Supplies

Imagine

VersaFine Clair Full-size Inkpad Warm Breeze
VersaFine Clair Full-size Inkpad Golden Meadow
VersaFine Clair Full-size Inkpad Verdant
VersaFine Clair Full-size Inkpad Glamorous
VersaFine Clair Nocturne
Memento Luxe full-size inkpad Pistachio
Memento Luxe full-size inkpad Dandelion
Memento Luxe full-size inkpad Teal Zeal
Memento Luxe full-size inkpad Love Letter
Tear it! Tape
On Point glue

Other

White cardstock
Diamante
Die-cut: Cricut Maker
Holographic vinyl: Cricut