Make a Cheery Birthday Card Using Fireworks! Shimmery Sprays

2021-Aug-Neva-Fireworks!-Bday-card-step7

By Neva Cole –

In today’s card making tutorial, I will show you how to use your Fireworks! Shimmery Spray inks in different ways rather than just spraying them!  All of the blooming sunflowers during my travels were the inspiration for this late summer birthday card.  It is very cool that sunflower heads follow the sun throughout the day, and they are always bright and cheery!

Skill:  Intermediate

Time:  1.5 hours

Directions:

2021-Aug-Neva-Fireworks!-Bday-card-Step1

Step 1

Stamp sunflower image in Delicata Golden Glitz and heat emboss with Iridescent Embossing Powder.  The Delicata Golden Glitz is one of the brightest gold inks, and works best for a sunflower.  Die cut with an electronic die cut machine, or fussy cut with scissors.

2021-Aug-Neva-Fireworks!-Bday-card-Step2
Step 2

Use a brush tip Fantastix to color in the center of the sunflower with Delicata Black Shimmer.

2021-Aug-Neva-Fireworks!-Bday-card-Step3

Step 3

Shake the Fireworks! spray until all of the shimmer is mixed in.  When the spray sits for awhile, the shimmer settles to the bottom and can be seen as a thin layer through the bottle.  Remove the spray lid and tap a bit of Fireworks! on your work mat from the end of the plastic tube.  Use a fine tip paint brush to paint the sunflowers a beautiful iridescent Dandelion Yellow.  Yellow ink is one of the more difficult inks to use, and this method solves that dilemma!

2021-Aug-Neva-Fireworks!-Bday-card-Step4

Step 4

Stamp the leaf image in Brilliance Pearlescent Ivy and heat emboss with Iridescent Embossing Powder.  Using embossing powder helps maintain the original ink color of the image while painting over with Fireworks! spray.  It also allows you to color inside the lines much more easily! Use a fine point paint brush to add Fireworks! in Bamboo Leaves.  Die cut or fussy cut the leaves.

2021-Aug-Neva-Fireworks!-Bday-card-Step5

Step 5

To get a finer sprinkling of more carefully located drops of Fireworks!, use the same paint brush and gently tap over the card stock to create a fine splatter pattern.  When using the spray nozzle, the color is denser on the cardstock.  Finish the edges by inking with an ink blusher and Brilliance Pearlescent Ivy.

2021-Aug-Neva-Fireworks!-Bday-card-Step6

Step 6

Edge the base card with an ink blusher and Delicata Golden Glitz.  Using inks throughout the card allows for perfect coordination.

2021-Aug-Neva-Fireworks!-Bday-card-step7

Step 7

Position the leaves and sunflowers on the card front to determine the location for the sentiment.  Stamp the sentiment in Brilliance Pearlescent Ivy and heat emboss with Iridescent embossing powder.  Adhere the layers of the card together.  The card front and leaves are adhered with Tear-It! Tape, and the sunflowers are adhered with thin dimensional foam adhesive.

Art Supplies

Imagine
Other
  • Auntie Amy Sunflower image
  • Heartfelt Creations Bold Leaf stamp
  • Technique Tuesday Large Birthday sentiment stamp
  • Fine point paint brush

Learn to Make a Colorful Hummingbird Birthday Card

2021-Jul-Neva-Hummingbird-Birthday-Card

By Neva Cole 

In today’s card making tutorial, I will show you how to make a multi-colored layered birthday cards using a plethora of great Imagine inks.  Hummingbirds can be iridescent, so Encore! Ultimate Metallic, Delicata, and Brilliance inks are used to create a beautiful hummer.  Ombre-hued Kaleidacolor inks are used to create the frame and background.

Skill:  Intermediate

Time:  2 hours

Directions:

2021-Jul-Neva-Hummingbird-Birthday-Card-Step1

Step 1

Stamp Hummingbird outline image and flower outline image in Encore! Ultimate Metallic Green.  Using a stamp positioner will allow more precise placement while stamping layers.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step2
Step 2

Stamp next layer of Hummingbird in Encore! Ultimate Metallic Honeydew and the stem of the flower in Delicata Emerald Green.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step3

Step 3

Stamp next layer of Hummingbird and flower stem in Encore! Ultimate Metallic Green.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step4

Step 4

Stamp throat of Hummingbird in Brilliance Pearlescent Purple.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step5

Step 5

Use a Memento Dual Tip Marker in Tuxedo Black to color eye.  Die cut with matching Frame Cut.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step6

Step 6

Stamp the layers of the flower with Versa Color Heliotrope, Violet, and Orange.  Die-cut with matching Frame Cut.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step7

Step 7

Trim cardstock to 3 1/2″ x 8 1/2″.  Use a foam brayer to ink the cardstock with Kaleidacolor in Fresh Greens.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step8

Step 8

Die-cut Foliage Frame.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step9

Step 9

Trim cardstock to 7 1/8” x 8 ½” and fold in half.  Use a foam brayer to ink the cardstock with Kaleidacolor in Blue Breeze.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step10

Step 10

Place Foliage frame over blue background to determine position for sentiment.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step11

Step 11

Stamp sentiment in the darkest color from the Kaleidacolor Blue Breeze ink pad.  It is easiest to do this with the pad expanded to get just the end inked section of the Kaleidacolor pad.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step12

Step 12

Adhere layers of card together.  The Foliage frame is adhered with thin dimensional foam adhesive. The upper and lower flowers are adhered with On Point Glue, and the middle flower to thin dimension foam adhesive.  The hummingbird is adhered with thicker dimensional foam adhesive.

Art Supplies

Imagine
Other
  • Hero Arts Color Layering Hummingbird & Frame Cuts
  • Kat Scrappiness Slimline Card Foliage Frame
  • Sponge brayer
  • Dimensional Foam Adhesive
  • Stamp positioner

Learn How to Make a Textured Metallic Wedding Card

2021-Jun-Neva-Metallic-Wedding-Card_blog

By Neva Cole 

In today’s card making tutorial, I will show you how to make a Textured Metallic Wedding Card using VersaMark, Delicata, and Embossing Powder.  This is a stunning card to make for a bride and groom as they celebrate their wedding day.

Skill:  Intermediate

Time:  2 hours

Directions:

2021-Jun-Neva-Metallic-Wedding-Card-Step1

Step 1

This technique involves inking the FLAT side of an embossing folder for either 2-D or 3-D folder.  This folder is 3-D with both indentations and slight protrusions.  Ink the folder well using a brayer and VersaMark ink.  Place white cardstock in folder and pressure emboss.

2021-Jun-Neva-Metallic-Wedding-Card-Step2
Step 2

Sprinkle liberally with Black Embossing Powder and heat the card from below with a heat embossing gun.  Allow cardstock to cool.

2021-Jun-Neva-Metallic-Wedding-Card-Step3

Step 3

Lightly rub Delicata Golden Glitz over the surface of the cardstock.  The high areas will pick up the ink.  This creates a great three dimension look of black, white, and gold.  Trim the finished panel to 4” x 5 ½”.

2021-Jun-Neva-Metallic-Wedding-Card-Step4

Step 4

Stamp “Mr.” & “Mrs.” in Delicata Golden Glitz and heat emboss with Iridescent Embossing Powder.  Fussy cut the banners with scissors

2021-Jun-Neva-Metallic-Wedding-Card-Step5

Step 5

Die cut four “Congratulations” die cuts from white cardstock with Spellbinders Phrase Set One.  Use an ink dauber to color the top die cut then heat emboss with Iridescent Embossing Powder.  Use very small dots of On Point glue around the letters of the die cut to glue the layers together.

2021-Jun-Neva-Metallic-Wedding-Card-Step6

Step 6

Trim a strip of black cardstock to 7/8″ x 4″.  Stamp with a background stars stamp in Delicata Silvery Shimmer and heat emboss with Silver Embossing Powder.  Once cool add shine with Sheer Shimmer Stix in Sparkle.

2021-Jun-Neva-Metallic-Wedding-Card-Step7

Step 7

Trim cardstock to 4 1/2″ x 11″ and fold in half for a top fold card.  Using and ink dauber add Delicata Golden Glitz ink around the outer 1/4″ of the card base.

2021-Jun-Neva-Metallic-Wedding-Card-Step8

Step 8

Stamp the sentiment inside the card with Delicata Black Shimmer and heat emboss with Iridescent Embossing Powder.

2021-Jun-Neva-Metallic-Wedding-Card-Step9

Step 9

Adhere card layers together with TearIt Tape, and adhere die cut with On Point Glue.  The small little dot (tittle) of the letter “i” is replaced with a small gold adhesive rhinestone.  The original tittle was too small to layer together.

Art Supplies

Imagine

• VersaMark

• Embossing Powder – Black, Iridescent, Silver

• Delicata – Golden Glitz, Silvery Shimmer, Black Shimmer

• Sheer Shimmer Stix -Sparkle

• On Point Glue

• Sponge Daubers

• Tear-It! Tape

Other

• Sizzix- 3-D Textured Impressions by Georgia Evans Star Fall

• Hampton Art-Bride and Groom Stamp Set

• Spellbinders-Phrase Set One-Congratulations

• Neato Stuff-Background cube stamp stars

• Brayer

• Scissors

• Gold adhesive rhinestone

Make a Star-Spangled Independence Day Card

2021-jun-kyriakos-celebrate-card-main-wm-900

By Kyriakos Pachadiroglou

Celebrate Independence Day with an easy to make Kraft paper card, using Walnut Inks and adding some shimmer with Delicata inks.

 

Skill: Beginner

Time: 30 Minutes

 

Directions:

2021-jun-kyriakos-celebrate-card-step1

Step 1

Damp the Jumbo Daubers with the Walnut Inks and press them to the edges of a 4×6 inch white card stock to create a thick line.

 

2021-jun-kyriakos-celebrate-card-step2

Step 2

Use a large Stipple Brush to add strike shimmering color from the Delicata ink pads, Sapphire Blue and Ruby Red on the above lines.

 

2021-jun-kyriakos-celebrate-card-step3

Step 3

Cut a star from a piece of Kraft card stock and stamp stars with the VersaColor White ink pad.

 

2021-jun-kyriakos-celebrate-card-step4

Step 4

Cut 5 inch long pieces of the gingham ribbons and add Tear It! Tape.

 

2021-jun-kyriakos-celebrate-card-step5
Step 5

Place the ribbons to form an X shape and stamp upon them with the VersaFine CLAIR Nocturne ink pad and the Sunshine stamp.

 

2021-jun-kyriakos-celebrate-card-step6
Step 6

Stamp the “CELEBRATE” sentiment with the VersaFine CLAIR Nocturne, cut around and place it on a bit larger Kraft color paper cutting.

 

2021-jun-kyriakos-celebrate-card-step7

Step 7

Set the sentiment with Tear It! Tape and then on a card base.

 

Art Supplies:

Imagine

Walnut Ink – Cherry Blossom, Cornflower

VersaColor – White

VersaFine CLAIR – Nocturne

Delicata – Sapphire Blue, Ruby Red

Stipple Brush

Jumbo Daubers

Tear It! Tape

 

Other

Card stock

Gingham ribbon – blue, red

Darkroom door stamp – Sunshine

Star stamp

Celebrate stamp

How to Make a Mother’s Day Card

2021_April2_JN_Mothersdaycard_1

By Jowilna Nolte 

I am not one for a traditional Mother’s Day Card – although the message inside may be one of gratitude, on the outside it can reflect something personal as well.

Instead of doing the usual thing I combined some fun stamping and inking with a vinyl heart and a little stamped sentiment that will mean the world to my mom.

“FRESH START” is my prayer for her this Mother’s Day – the beginning of so much more than just being a mother.

Skill Level: Beginner

Time: 30 minutes

Directions:

2021_April2_JN_MOthersdaycard_step1

Step 1
Combine VersaMagic Mango Madness with  Delicata Champagne to ink some chipboard hearts.

2021_April2_JN_Mothersdaycard_step2

Step 2
On a white smooth cardstock background, use the VersaMagic and ink the background. Combine the “direct to paper” method carefully blending the ink and then use a sponge dauber for achieve an ombre effect towards the top.

2021_April2_JN_Mothersdaycard_step3

Step 3

Stamp onto the background several times overlapping different stamp designs and VersaMagic ink. Then finishing off the top layer using Delicate White Shimmer to stamp the last layer. Look at that gorgeous shimmer.

2021_April2_JN_Mothersdaycard_step4

Step 4

Apply a layered vinyl heart, stamped sentiment and chipboard heart, as well as some embellishments.
Matt onto white cardstock layer and then onto a kraft card.

2021_April2_JN_Mothersdaycard_2

And just like that I created a heartfelt and meaningful Mother’s Day Card with lots of sparkle and shimmer – wishing my mom a bright future ahead.

Art Supplies

Imagine

VersaMagic Mango Madness
Delicata Whte Shimmer
Delicata Champagne
On Point Glue
Tear It! Tape

Other

• Smooth White Cardstock
• Stamps: Hero Arts, Carabelle, Altenew
• Vinyl: Cricut
• Embellishments

Create a Valentines Card with a Paper Airplane Theme

by Martha Lucia Gomez

Create a Valentines Card with a Paper Airplane Theme

Hello everyone! Today, I have a fun and creative stamping technique that you can use with all your clear stamps with symmetric form. This month we have prepared Valentine’s projects and of course, we are using the red color to enhance our passion for the inks.

Skill: Intermediate
Time: 1 hour

Directions


Step 1

To create this project, I am using the Pink Shimmer Delicata inkpad and Glamorous VersaFine Clair in combination with both sides of one single stamp from the stamp set Life’s a Breeze from Joy Clair. Yes, you read well – to create my card I used both sides of the stamp. Let me share it with you.


Step 2

First, I positioned the paper airplane stamp over the acrylic block. I adhered the stamping side over the block and let the backside be inked with the Delicata ink in Pink Shimmer. Then I stamped randomly the image over a piece of whisper white card stock, cleaned the stamp thoroughly and let the ink dry naturally. I love to use the Pink Shimmer Delicata Ink – the color is soft and shiny at the same time.


Step 3

When the ink was totally dry I turned the same paper airplane stamp in the normal way and inked it with VersaFine Clair Glamorous Ink. Like I used a symmetric image, stamp the image in the normal way was easy.


Step 4

After stamping all the comets, I covered the entire layer with Clear Embossing Powder and melted with the heat tool. Then I resized the layer and pasted over the red card base using dimensional or double-sided foam tape. To resize the image, I used a stitched rectangle die cut from Gina Marie Designs. Set the entire piece aside for a while.


Step 5

To decorate the background, take a piece of cardstock in any color and ink it directly with VersaFine Clair Glamorous inkpad. Cover the entire piece with Clear Embossing Powder and activate the powder with the heat tool.


Step 6

Take the embossed piece and cut with the dies that you want to use. On this card, I am using the new I Love You Shadow dies from Kat Scrappiness. These dies come with a mat and I cut them from a pink piece of card stock, pasted the layer with On Point Glue and then paste the letters over the decorated card base using dimensional or double-sided foam tape. This is a creative technique that you can explore with different types of stamps. The result is always different and if you mix and match the colors of ink you will love the effect.

Supplies

Imagine
Other
  • Cardstock: Real Red, Whisper White, Powder Pink
  • Acrylic Block
  • Die Cuts – Gina Marie Designs & Kat Scrappiness
  • Stamps – Life’s a Breeze by Joy Clair Stamps
  • Dimensionals or Double-sided foam tape