Make a Quick Batch of Halloween Cards with a Few Fun Techniques

2021-Oct-Neva-PumpkinCard

By Neva Cole –

In today’s tutorial I will show you how to put together a quick set of Halloween cards ready to send out.  Ink resist and coloring with Fantastix and Kaleidacolor pads makes for quick images to place on a card.  The background is another Kaleidacolor brayered onto glossy cardstock.

Skill:  Intermediate

Time:  1.5 hours

Directions:

2021-Oct-Neva-PumpkinCard2

Step 1

Stamp pumpkin images in VersaFine Clair three times each on white cardstock. VersaFine Clair is a perfect ink for this technique as there is no smear when coloring over with other dye based inks.

2021-Oct-Neva-PumpkinCard3
Step 2

Stamp pumpkin carving in Radiant Neon Electric Yellow and heat emboss with Iridescent Embossing Powder.

2021-Oct-Neva-PumpkinCard4

Step 3

Fussy cut or die cut pumpkins.  Use a Fantastix brush tip to color pumpkins using ink from Kaleidacolor Desert Heat and Cappuccino Delight.  The spectrum of colors allows a quick selection to shade different areas of the pumpkins.  Use a paper towel or soft cloth and remove ink from the embossed area so the images pop.

2021-Oct-Neva-PumpkinCard5

Step 4

Stamp sentiment on glossy cardstock in Radiant Neon Electric Yellow and heat emboss with Iridescent Embossing Powder.

2021-Oct-Neva-PumpkinCard6

Step 5

Use a soft rubber brayer to ink cardstock with Kaleidacolor in Vineyard.  Remove ink from the embossed area with a paper towel or soft cloth.

2021-Oct-Neva-PumpkinCard7

Step 6

Die cut 4 bats from black cardstock. Use Radiant Neon Amplify! in white to add big white eyes. The Amplify! was not heated.

Step 6

Die cut four fence die cuts from black cardstock.  (Not shown.)

2021-Oct-Neva-PumpkinCard8

Step 8

Adhere background to A2 grey card base with Tear It! Tape. Adhere the fence and bat die cuts with On Point Glue.  Adhere center pumpkin with Tear It! Tape.  Adhere side pumpkins with dimensional foam adhesive.

Art Supplies

Imagine
Other
  • Joy Clair Trick or Treat Stamps
  • Heidi Grace Designs Halloween Stamps
  • Echo Park Going Batty Die
  • Heartfelt Creations Lattice Flourish Gateway Die
  • Rubber Brayer
  • Dimensional Foam Adhesive
  • Brother Scan-N-Cut

Learn How to Make a Fall Thank You Card

2021-Sept-Neva-FallThanks

By Neva Cole –

In today’s card making tutorial, I will show you how to create a Fall themed “Thanks” card using three different inks. The Autumn colors are vibrant and blend well with kraft card stock and burlap ribbon.  I hope this card inspires you to think of all things pumpkin spice and apple cider as we head into fall!

Skill:  Intermediate

Time:  1.5 hours

Directions:

2021-Sept-Neva-FallThanks-Step1ab2021-Sept-Neva-FallThanks-Step1c

Step 1

Spritz white cardstock with Fireworks! Lady Bug, Tangelo, and Dandelion.  I like to start with the darkest color first working to the lighter color to fill in the last areas of white.  Set aside to dry.

2021-Sept-Neva-FallThanks-Step2
Step 2

Use Memento Peanut Brittle and Rich Cocoa ink pads and press directly on the cardstock. This creates a splotchy look.

2021-Sept-Neva-FallThanks-Step3

Step 3

Die cut the Fireworks! colored cardstock with Skeleton Leaves dies.  Cut an outline to back the leaves either by hand or with an electronic die cutting machine.  Adhere the layers together with On Point Glue.  Small dots in the thicker areas of the leaves works best.

2021-Sept-Neva-FallThanks-Step4

Step 4

Die cut one “Thanks” sentiment from the Fireworks! colored cardstock and three from white cardstock.  Layer together with On Point Glue to create a dimensional sentiment.  To avoid glue from leaking out from between the layers, use small dots of glue on the outside edges.

2021-Sept-Neva-FallThanks-Step5

Step 5

Use a soft rubber brayer to ink cardstock trimmed to 4.74” x 5.75”.  Kaleidacolor in Autumn Leaves was used with the green portion in the middle and the light orange on either end of the cardstock.  Flip the cardstock to achieve this look.

2021-Sept-Neva-FallThanks-Step6

Step 6

Pressure emboss the cardstock with Basket Weave embossing folder.  Use a sanding block to remove color and allow the embossed design to pop.

2021-Sept-Neva-FallThanks-Step7

Step 7

Using Tear It! Tape, adhere your A7 kraft card base to background. Then tape the burlap ribbon. The Tear It! Tape, it’s translucent enough that it does not show through the burlap, and will hold the card together.  Adhere the “Thanks” sentiment and the leaves with On Point Glue.

Art Supplies

Imagine
Other
  • Sizzix Thinlets Skeleton Leaves
  • Spellbinders Phrase Set One
  • Darice Basket Weave embossing folder A7 size
  • Recollections A7 card Base
  • Burlap Ribbon
  • Sanding Block
  • Dimensional Foam Adhesive
  • Brother Scan-N-Cut

Make a Cheery Birthday Card Using Fireworks! Shimmery Sprays

2021-Aug-Neva-Fireworks!-Bday-card-step7

By Neva Cole –

In today’s card making tutorial, I will show you how to use your Fireworks! Shimmery Spray inks in different ways rather than just spraying them!  All of the blooming sunflowers during my travels were the inspiration for this late summer birthday card.  It is very cool that sunflower heads follow the sun throughout the day, and they are always bright and cheery!

Skill:  Intermediate

Time:  1.5 hours

Directions:

2021-Aug-Neva-Fireworks!-Bday-card-Step1

Step 1

Stamp sunflower image in Delicata Golden Glitz and heat emboss with Iridescent Embossing Powder.  The Delicata Golden Glitz is one of the brightest gold inks, and works best for a sunflower.  Die cut with an electronic die cut machine, or fussy cut with scissors.

2021-Aug-Neva-Fireworks!-Bday-card-Step2
Step 2

Use a brush tip Fantastix to color in the center of the sunflower with Delicata Black Shimmer.

2021-Aug-Neva-Fireworks!-Bday-card-Step3

Step 3

Shake the Fireworks! spray until all of the shimmer is mixed in.  When the spray sits for awhile, the shimmer settles to the bottom and can be seen as a thin layer through the bottle.  Remove the spray lid and tap a bit of Fireworks! on your work mat from the end of the plastic tube.  Use a fine tip paint brush to paint the sunflowers a beautiful iridescent Dandelion Yellow.  Yellow ink is one of the more difficult inks to use, and this method solves that dilemma!

2021-Aug-Neva-Fireworks!-Bday-card-Step4

Step 4

Stamp the leaf image in Brilliance Pearlescent Ivy and heat emboss with Iridescent Embossing Powder.  Using embossing powder helps maintain the original ink color of the image while painting over with Fireworks! spray.  It also allows you to color inside the lines much more easily! Use a fine point paint brush to add Fireworks! in Bamboo Leaves.  Die cut or fussy cut the leaves.

2021-Aug-Neva-Fireworks!-Bday-card-Step5

Step 5

To get a finer sprinkling of more carefully located drops of Fireworks!, use the same paint brush and gently tap over the card stock to create a fine splatter pattern.  When using the spray nozzle, the color is denser on the cardstock.  Finish the edges by inking with an ink blusher and Brilliance Pearlescent Ivy.

2021-Aug-Neva-Fireworks!-Bday-card-Step6

Step 6

Edge the base card with an ink blusher and Delicata Golden Glitz.  Using inks throughout the card allows for perfect coordination.

2021-Aug-Neva-Fireworks!-Bday-card-step7

Step 7

Position the leaves and sunflowers on the card front to determine the location for the sentiment.  Stamp the sentiment in Brilliance Pearlescent Ivy and heat emboss with Iridescent embossing powder.  Adhere the layers of the card together.  The card front and leaves are adhered with Tear-It! Tape, and the sunflowers are adhered with thin dimensional foam adhesive.

Art Supplies

Imagine
Other
  • Auntie Amy Sunflower image
  • Heartfelt Creations Bold Leaf stamp
  • Technique Tuesday Large Birthday sentiment stamp
  • Fine point paint brush

Learn to Make a Colorful Hummingbird Birthday Card

2021-Jul-Neva-Hummingbird-Birthday-Card

By Neva Cole 

In today’s card making tutorial, I will show you how to make a multi-colored layered birthday cards using a plethora of great Imagine inks.  Hummingbirds can be iridescent, so Encore! Ultimate Metallic, Delicata, and Brilliance inks are used to create a beautiful hummer.  Ombre-hued Kaleidacolor inks are used to create the frame and background.

Skill:  Intermediate

Time:  2 hours

Directions:

2021-Jul-Neva-Hummingbird-Birthday-Card-Step1

Step 1

Stamp Hummingbird outline image and flower outline image in Encore! Ultimate Metallic Green.  Using a stamp positioner will allow more precise placement while stamping layers.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step2
Step 2

Stamp next layer of Hummingbird in Encore! Ultimate Metallic Honeydew and the stem of the flower in Delicata Emerald Green.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step3

Step 3

Stamp next layer of Hummingbird and flower stem in Encore! Ultimate Metallic Green.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step4

Step 4

Stamp throat of Hummingbird in Brilliance Pearlescent Purple.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step5

Step 5

Use a Memento Dual Tip Marker in Tuxedo Black to color eye.  Die cut with matching Frame Cut.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step6

Step 6

Stamp the layers of the flower with Versa Color Heliotrope, Violet, and Orange.  Die-cut with matching Frame Cut.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step7

Step 7

Trim cardstock to 3 1/2″ x 8 1/2″.  Use a foam brayer to ink the cardstock with Kaleidacolor in Fresh Greens.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step8

Step 8

Die-cut Foliage Frame.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step9

Step 9

Trim cardstock to 7 1/8” x 8 ½” and fold in half.  Use a foam brayer to ink the cardstock with Kaleidacolor in Blue Breeze.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step10

Step 10

Place Foliage frame over blue background to determine position for sentiment.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step11

Step 11

Stamp sentiment in the darkest color from the Kaleidacolor Blue Breeze ink pad.  It is easiest to do this with the pad expanded to get just the end inked section of the Kaleidacolor pad.

2021-Jul-Neva-Hummingbird-Birthday-Card-Step12

Step 12

Adhere layers of card together.  The Foliage frame is adhered with thin dimensional foam adhesive. The upper and lower flowers are adhered with On Point Glue, and the middle flower to thin dimension foam adhesive.  The hummingbird is adhered with thicker dimensional foam adhesive.

Art Supplies

Imagine
Other
  • Hero Arts Color Layering Hummingbird & Frame Cuts
  • Kat Scrappiness Slimline Card Foliage Frame
  • Sponge brayer
  • Dimensional Foam Adhesive
  • Stamp positioner

Learn How to Make a Textured Metallic Wedding Card

2021-Jun-Neva-Metallic-Wedding-Card_blog

By Neva Cole 

In today’s card making tutorial, I will show you how to make a Textured Metallic Wedding Card using VersaMark, Delicata, and Embossing Powder.  This is a stunning card to make for a bride and groom as they celebrate their wedding day.

Skill:  Intermediate

Time:  2 hours

Directions:

2021-Jun-Neva-Metallic-Wedding-Card-Step1

Step 1

This technique involves inking the FLAT side of an embossing folder for either 2-D or 3-D folder.  This folder is 3-D with both indentations and slight protrusions.  Ink the folder well using a brayer and VersaMark ink.  Place white cardstock in folder and pressure emboss.

2021-Jun-Neva-Metallic-Wedding-Card-Step2
Step 2

Sprinkle liberally with Black Embossing Powder and heat the card from below with a heat embossing gun.  Allow cardstock to cool.

2021-Jun-Neva-Metallic-Wedding-Card-Step3

Step 3

Lightly rub Delicata Golden Glitz over the surface of the cardstock.  The high areas will pick up the ink.  This creates a great three dimension look of black, white, and gold.  Trim the finished panel to 4” x 5 ½”.

2021-Jun-Neva-Metallic-Wedding-Card-Step4

Step 4

Stamp “Mr.” & “Mrs.” in Delicata Golden Glitz and heat emboss with Iridescent Embossing Powder.  Fussy cut the banners with scissors

2021-Jun-Neva-Metallic-Wedding-Card-Step5

Step 5

Die cut four “Congratulations” die cuts from white cardstock with Spellbinders Phrase Set One.  Use an ink dauber to color the top die cut then heat emboss with Iridescent Embossing Powder.  Use very small dots of On Point glue around the letters of the die cut to glue the layers together.

2021-Jun-Neva-Metallic-Wedding-Card-Step6

Step 6

Trim a strip of black cardstock to 7/8″ x 4″.  Stamp with a background stars stamp in Delicata Silvery Shimmer and heat emboss with Silver Embossing Powder.  Once cool add shine with Sheer Shimmer Stix in Sparkle.

2021-Jun-Neva-Metallic-Wedding-Card-Step7

Step 7

Trim cardstock to 4 1/2″ x 11″ and fold in half for a top fold card.  Using and ink dauber add Delicata Golden Glitz ink around the outer 1/4″ of the card base.

2021-Jun-Neva-Metallic-Wedding-Card-Step8

Step 8

Stamp the sentiment inside the card with Delicata Black Shimmer and heat emboss with Iridescent Embossing Powder.

2021-Jun-Neva-Metallic-Wedding-Card-Step9

Step 9

Adhere card layers together with TearIt Tape, and adhere die cut with On Point Glue.  The small little dot (tittle) of the letter “i” is replaced with a small gold adhesive rhinestone.  The original tittle was too small to layer together.

Art Supplies

Imagine

• VersaMark

• Embossing Powder – Black, Iridescent, Silver

• Delicata – Golden Glitz, Silvery Shimmer, Black Shimmer

• Sheer Shimmer Stix -Sparkle

• On Point Glue

• Sponge Daubers

• Tear-It! Tape

Other

• Sizzix- 3-D Textured Impressions by Georgia Evans Star Fall

• Hampton Art-Bride and Groom Stamp Set

• Spellbinders-Phrase Set One-Congratulations

• Neato Stuff-Background cube stamp stars

• Brayer

• Scissors

• Gold adhesive rhinestone

Learn How to Make a Quick Father’s Day Card

 

By Neva Cole 

Today I will be demonstrating how to make a quick multi-layered card using three stamps and VersaColor and StazOn inks.  This tone on tone card is a simple way to create a wonderful card for the Father in you life.

 

Skill: Beginner

Time: 30 Minutes

 

2021-May-Neva-FathersDay-Card

 

Directions:

 

2021-May-Neva-FathersDay-Card-1

Step 1

Stamp the sentiment in VersaMark Mountain Lake and heat emboss with Sparkle Embossing Powder.  Then die cut the sentiment with Lawn Fawn Everyday Sentiment Banners.

 

2021-May-Neva-FathersDay-Card-2
Step 2

Use VersaColor Mountain Lake and stamp the “Tape Measure” and the “Love Beyond Measure” around the perimeter of an A-2 card base.  Ink the edges of a 3 1/2″ x 4 5/8″.  Stamp the Tape Measure in StazOn Ink in in Jet Black, die cut with matching die.

 

2021-May-Neva-FathersDay-Card-3

Step 3

Pressure emboss the 3 1/2″ x 4 5/8″ with Spellbinders Maze Embossing Folder.  Lightly ink with Seafoam.  Stamp the the Love Beyond Measure on card front.

 

2021-May-Neva-FathersDay-Card-4

Step 4

Assemble the card with dimensional foam adhesive and enjoy!

 

 

Art Supplies

Imagine

VersaMark: Mountain Lake, Seafoam

StazOn-Jet Black

Embossing Powder-Sparkle

 

Other

Hero Arts CL1498 Holiday Sentiments

Technique Tuesday What a Guy Stamp and Die

Lawn Fawn Everyday Sentient Banner

Spellbinders Maze Embossing Folder