How to Make a Simple Fall Tag

Leaf-Tag-Cover-600

By Alison Heikkila –

As we approach Autumn, I thought it would be fun to share a way to make a simple tag that can be used for gifts, as a place card, or even attached to a card base. By using a few simple techniques, you can make a bunch of these tags quickly, and save them for when you need them.

Skill Level: Beginner
Time: 15-20 Minutes

Directions:

Leaf-Tag-1

Step 1:

Die cut a tag out of Kraft cardstock. Cut a piece of Bristol Smooth Cardstock that is a little larger than your leaf stamp.

Step 2:

Stamp your leaf with VersaFine Clair Ink in Pinecone.

Step 3:

Apply Clear Mboss Embossing Powder to the leaf, shake off the excess, and heat set.

Leaf-Tag-2

Step 4:

Using Memento Inks in Pear Tart, Dandelion, Tangelo, and Morocco, apply using a blending brush. The colors should fade into each other and cover the entire leaf. The photo above shows the leaf not completely inked.

Step 5:

Die cut the leaf using the coordinating die, or fussy cut it.

Leaf-Tag-3

Step 6:

Place the leaf on the tag to help determine where you will add Tear It! Tape. The Tear It! Tape will be used to add stripes of embossing powder. I applied 2 strips.

Leaf-Tag-4

Step 7:

Sprinkle on Shimmering Night Sky Mboss powder on to the Tear It! Tape, shake off the excess, and heat set.

Leaf-Tag-5

Step 8:

Ink the edges of the tag with Rich Cocoa Memento ink and a blending brush. You could also do this step before you add the Tear It! Tape.

Leaf-Tag-6

Step 9:

Splatter on Sheer Shimmer Spritz in Gold all over the tag. Let dry

Leaf-Tag-7

Step 10:

Ink a small sentiment with VersaFine Clair Pinecone ink and stamp it on the tag.

Step 11:

Apply foam squares to the back of your leaf to raise it off of the surface of the tag and adhere it.

Step 12:

Add some ribbon or twine to the hole in the tag.

Leaf-Tag-8-600

I think this tag is so pretty and festive. You can easily use different colors of Memento inks or different embossing powder colors to completely change up the look.

Art Supplies:

Imagine:

• VersaFine Clair: Pinecone Ink
• Memento Ink: Pear Tart, Dandelion, Tangelo, Morocco, Rich Cocoa
• Tear It! Tape
• Sheer Shimmer Spritz in Gold
• Mboss Powder in Clear and Shimmering Night Sky

Other:

• Sizzix/Tim Holtz: Framelets Tag Die Set
• Kraft Cardstock
• Strathmore: Smooth Bristol Cardstock
• Stampendous: Jumbo Leaves
• Simon Says Stamp: Tiny Words
• May Arts: Organza Ribbon
• Blending Brushes
• Foam Squares

Stamp and Color on Cork to Make a Birthday Card

 

2021-sep-kyriakos-cork-birthday-card-700

By Kyriakos Pachadiroglou

– Use a piece of cork sheet as a base to stamp with StazOn inks and color with MEMENTO markers to create a Birthday greeting card. Add cork round shapes and a wooden heart to embellish the card.

 

Skill: Beginner

Time: 30 Minutes

 

Directions:

2021-sep-kyriakos-cork-birthday-card-step1

Step 1

Cut a 4x5in piece of the cork sheet. Stamp with the wood slice stamp and the StazOn Black Cherry to cover the surface.

 

2021-sep-kyriakos-cork-birthday-card-step2

Step 2

Color the heart in the center of the stamp design with the MEMENTO Love Letter marker.

 

2021-sep-kyriakos-cork-birthday-card-step3

Step 3

Use a palette knife to spread some structure paste and let it set.

 

2021-sep-kyriakos-cork-birthday-card-step4

Step 4

Cut thin slices of the wine cork and stamp them with the wood slice stamp and the StazOn Timber Brown ink pad.

 

2021-sep-kyriakos-cork-birthday-card-step5
Step 5

Color the lines of the stamped cork slices with the MEMENTO markers

 

2021-sep-kyriakos-cork-birthday-card-step6
Step 6

Stamp and color the wooden heart with the StazOn Black Cherry ink pad and the MEMENTO Love Letter marker.

 

2021-sep-kyriakos-cork-birthday-card-step7

Step 7

Stamp with the StazOn BlackCherry ink pad the happy birthday stamp and cut around.

 

2021-sep-kyriakos-cork-birthday-card-step_8

Step 8

Glue the colored cork slices on the card first to work as a base for the wooden heart.

 

2021-sep-kyriakos-cork-birthday-card-step9

Step 9

Continue by adding the rest of the embellishments.

 

Art Supplies:

Imagine

StazOn – Timber Brown, Black Cherry

MEMENTO Markers – Love letter,  Dandelion, Cottage Ivy, Pine

Palette Knife

 

Other

Card base

Cork sheet

Wine cork

Wooden heart shape

Structure paste

Crackerbox and Suzy stamps – wood slice

Happy birthday stamp

 

 

Create an Autumn Themed Wedding Card With Sheer Shimmer Stixs and Delicata Ink

Sept-2021-katy-ingram-autumn-themed-wedding-card-700

By Katy Ingram –

Hello friends! Katy here and for today’s video I have an Autumn themed wedding card for you. I was inspired by a project I saw a couple years ago and I could not wait for fall to roll around so I could show you. I know a long time to wait but, worth it, I think. The Rose Gold Sheer Shimmer Stix and the Delicata Rose Gold ink was perfect to bring this card together. I hope you enjoy.

Thanks For Watching.

Skill: Beginner, Intermediate, Advanced
Time: 30 minutes

 

Art Supplies:

Imagine

• Delicata Rose Gold Ink• Sheer Shimmer Stix Rose Gold

• MBoss Embossing Powder Gold

• VersaFine Clair Chianti

• On Point Glue

• Tear It! Tape

• VersaMark Ink

Other Products Used:

• The Greetery

  • Pretty Postmark Stamp Set
  • Sentiment Suites – Love Stamp Set
  • Knit Whits Stencil Set
  • Autumn Sketches Stamp Set

• Concord and 9th Lace Leaf Stamp and Die Set

• Strathmore 500 Series Hot Pressed Watercolor Paper

• Neenah Classic Crest 110 lb White Card Stock

• Fun Stampers Journey Oatmeal Card Stock

• May Arts Natural Jute String

 

Make a Beautiful Pink Embossed Card

2021-aug-kyriakos-pink-wish-card-900-wm

By Kyriakos Pachadiroglou

– Stamp with Radiant Neon ink and partially cover with Mboss embossing powder to make a flourish background on a denim color paper. Add layers with the same design, stamped with VersaFine CLAIR inks on white card stock.

 

Skill: Beginner

Time: 1 Hour

 

Directions:

2021-aug-kyriakos-pink-wish-card-step1

Step 1

On a 4.5×6 inch piece of the denim color paper stamp the poppy pattern with the Radiant Neon ink. Ink the stamp well and press it firmly on the paper holding it for a few seconds on the paper pressed.

 

2021-aug-kyriakos-pink-wish-card-step2

Step 2

Sprinkle Mboss Metallic Berry embossing powder (don’t fully cover the pattern), remove the excess and heat set.

 

2021-aug-kyriakos-pink-wish-card-step3

Step 3

On a 3×4 ¼ inch piece of white card stock, stamp with the VersaFine CLAIR Purple delight positioning the design to the middle left on the paper. Stamp with VersaFine Charming Pink on a second piece of paper and cut along the poppy flower.

 

2021-aug-kyriakos-pink-wish-card-step4

Step 4

Stamp a wish sentiment with VersaFine Nocturne and tear the paper on all sides.

 

2021-aug-kyriakos-pink-wish-card-step5
Step 5

Set the stamped card stocks on a card base with Tear It! Tape and add a layer of it vertically on the left side to set the white satin ribbon. Repeat horizontally for the pink one.

 

2021-aug-kyriakos-pink-wish-card-step6
Step 6

Add foam tape to the back of the flower and set it on the card.

 

 

Art Supplies:

Imagine

VersaFine CLAIR – Charming Pink, Purple Delight, Nocturne

Radiant Neon – Electric Coral

Mboss – Metallic Berry

Tear It! Tape

 

Other

Card stock – white and denim color

Card base

Foam tape

Penny Black – Poppy pattern stamp

White and pink ribbons

Heat tool

 

 

Make a Beautiful Heart-Shaped Plywood Ornament

2021-aug-kyriakos-stamp-on-plywood-600-wm

By Kyriakos Pachadiroglou

Make a distressed heart-shaped plywood ornament with Walnut Inks. Color with Memento inks for a smooth result and decorate with stamps and StazOn inks for a sharp and bleedless design.

 

Skill: Beginner

Time: 1 Hour

 

Directions:

2021-aug-kyriakos-stamp-on-plywood-step1

Step 1

Paint the plywood shape with All-Purpose White ink color. Let it dry well.

 

2021-aug-kyriakos-stamp-on-plywood-step2

Step 2

Sprinkle drops of the Walnut Ink Eucalyptus, add very few Walnut Ink Crystals and spray with water to dilute further. Dry well.

 

2021-aug-kyriakos-stamp-on-plywood-step3

Step 3

Use a Sponge Dauber to smoothly add color with Memento Rich Cocoa and Pear Tart ink pads.

 

2021-aug-kyriakos-stamp-on-plywood-step4

Step 4

Stamp the foliage first with the Memento Bamboo leaves and then stamp on top, slightly offsetting to the first design, with StazOn Olive Green.

 

2021-aug-kyriakos-stamp-on-plywood-step5
Step 5

Stamp butterflies with StazOn Fuchsia pink and Royal Purple ink pads.

 

2021-aug-kyriakos-stamp-on-plywood-step6
Step 6

Add a sentiment with StazOn Jet Black.

 

2021-aug-kyriakos-stamp-on-plywood-step7

Step 7

Cut 12″ long pieces of the cotton ribbon and spay with the Walnut Inks Eucalyptus, Lilac and Cherry Blossom. Let them dry.

 

2021-aug-kyriakos-stamp-on-plywood-step8

Step 7

Tie the cotton ribbons on the heart shape.

 

Art Supplies:

Imagine

All-Purpose Ink – White

Walnut Ink – Eucalyptus, Lilac, Cherry Blossom

Memento – Pear Tart, Rich cocoa, Bamboo Leaves

StazOn – Olive Green, Fuchsia Pink, Royal Purple, Jet Black

Sponge Daubers

 

Other

Plywood Heart Shape

Kaisercraft – Tigerlily Stamps

½” Cotton Ribbon

 

 

Make a Happy Birthday Sunburst Card Using VersaFine Clair

2021-aug-katy-versafine-clair-sunburst-instagram

By Katy Ingram

– Hello my friends! Katy here and today. In this video, I am going to show you how easy it is to create this super simple Happy Birthday sunburst card with a stencil and a few VersaFine Clair inks. I hope you enjoy. Thanks for watching.

Skill: Beginner, Intermediate, Advanced
Time: about 15 minutes

Art Supplies:

Imagine

• VersaFine Clair Inks: Paradise, Warm Breeze, Monarch, Charming Pink

• Emboss Embossing Powder: Silver

• VersaMark Dazzle: Frost

• Sheer Shimmer Stix: Sparkle• On Point Glue

Other Products Used:

• Heavyweight White Cardstock
• 48 Lb Vellum
• Waffle Flower Happy Birthday Stamp and Die Set
• Heavyweight Black Cardstock