Make a Quick Batch of Halloween Cards with a Few Fun Techniques

2021-Oct-Neva-PumpkinCard

By Neva Cole –

In today’s tutorial I will show you how to put together a quick set of Halloween cards ready to send out.  Ink resist and coloring with Fantastix and Kaleidacolor pads makes for quick images to place on a card.  The background is another Kaleidacolor brayered onto glossy cardstock.

Skill:  Intermediate

Time:  1.5 hours

Directions:

2021-Oct-Neva-PumpkinCard2

Step 1

Stamp pumpkin images in VersaFine Clair three times each on white cardstock. VersaFine Clair is a perfect ink for this technique as there is no smear when coloring over with other dye based inks.

2021-Oct-Neva-PumpkinCard3
Step 2

Stamp pumpkin carving in Radiant Neon Electric Yellow and heat emboss with Iridescent Embossing Powder.

2021-Oct-Neva-PumpkinCard4

Step 3

Fussy cut or die cut pumpkins.  Use a Fantastix brush tip to color pumpkins using ink from Kaleidacolor Desert Heat and Cappuccino Delight.  The spectrum of colors allows a quick selection to shade different areas of the pumpkins.  Use a paper towel or soft cloth and remove ink from the embossed area so the images pop.

2021-Oct-Neva-PumpkinCard5

Step 4

Stamp sentiment on glossy cardstock in Radiant Neon Electric Yellow and heat emboss with Iridescent Embossing Powder.

2021-Oct-Neva-PumpkinCard6

Step 5

Use a soft rubber brayer to ink cardstock with Kaleidacolor in Vineyard.  Remove ink from the embossed area with a paper towel or soft cloth.

2021-Oct-Neva-PumpkinCard7

Step 6

Die cut 4 bats from black cardstock. Use Radiant Neon Amplify! in white to add big white eyes. The Amplify! was not heated.

Step 6

Die cut four fence die cuts from black cardstock.  (Not shown.)

2021-Oct-Neva-PumpkinCard8

Step 8

Adhere background to A2 grey card base with Tear It! Tape. Adhere the fence and bat die cuts with On Point Glue.  Adhere center pumpkin with Tear It! Tape.  Adhere side pumpkins with dimensional foam adhesive.

Art Supplies

Imagine
Other
  • Joy Clair Trick or Treat Stamps
  • Heidi Grace Designs Halloween Stamps
  • Echo Park Going Batty Die
  • Heartfelt Creations Lattice Flourish Gateway Die
  • Rubber Brayer
  • Dimensional Foam Adhesive
  • Brother Scan-N-Cut

Learn How to Make An Autumn Shadow Box

 

2021-sep-kyriakos-autumn-shadow-box-horizontal_main

By Kyriakos Pachadiroglou

– Combine natural wood pieces, paper and a house shape cut from SHEET metal to capture the colors of the shadow and create a shadow box to decorate your home. Color a piece of fabric with MEMENTO inks and Fireworks! Shimmery Craft Sprays to create a background in earth color shades and place natural wood and paper leaves colored with MEMENTO Markers.

 

Skill: Advanced

Time: 1 Hour

 

Directions:

2021-sep-kyriakos-autumn-shadow-box-step1

Step 1

Place Tear It! Tape on the back base of the shadow box and cover it with the cotton fabric.

 

2021-sep-kyriakos-autumn-shadow-box-step2

Step 2

Spray with the Fireworks! Shimmery Craft Spray and let them dry.

 

2021-sep-kyriakos-autumn-shadow-box-step3

Step 3

Distress the fabric with MEMENTO Tangelo, Lady Bug and Desert Sand ink pads using Sponge Daubers. Sprinkle some drops of irRESISTible Bamboo Leaves color.

 

2021-sep-kyriakos-autumn-shadow-box-step4

Step 4

Stamp with the Blowing Leaves stamp and the StazOn Timber Brown.

 

2021-sep-kyriakos-autumn-shadow-box-step5
Step 5

Color the leaves with MEMENTO Markers.

 

2021-sep-kyriakos-autumn-shadow-box-step6
Step 6

Stamp leaves and color them with the MEMENTO Markers adding details with darker ones. Cut around the leaves to separate.

 

2021-sep-kyriakos-autumn-shadow-box-step7

Step 7

Stamp the Autumn sentiment with StazOn Timber Brown and cut around.

 

2021-sep-kyriakos-autumn-shadow-box-step8

Step 8

Cut a house shape using the full length of a SHEET metal postcard.

 

2021-sep-kyriakos-autumn-shadow-box-step9

Step 9

Color the SHEET metal house with StazOn Timber brown and Black Cherry ink pads and cover with the GlazOn matte.

2021-sep-kyriakos-autumn-shadow-box-step10

Step 10

Glue the slices of the wood on the fabric background and add the paper leaves.

2021-sep-kyriakos-autumn-shadow-box-step11

Step 11

Finally place the SHEET metal house, the sentiment and any further embellishments.

2021-sep-kyriakos-autumn-shadow-profile

Art Supplies:

Imagine

Fireworks! Shimmery Craft Sprays- Desert Sand, Rich Cocoa, New Sprout

MEMENTO Ink Pads – Tangelo, Lady bug, Desert Sand, Dandelion

irRESISTible – Bamboo Leaves

StazOn – Timber Brown, Black Cherry

MEMENTO Dual Tip Markers – Love Letter, Dandelion, Cottage Ivy, Pear Tart

SHEET Metal – Postcard

GlazOn – Matte

Tear It! Tape

Sponge Daubers

 

Other

Shadow Box Framed

Card Stock White

Cotton Fabric

Slices of Wood

Crackerbox & Suzy stamps – Autumn Shows, Blowing Leaves

Glass Beads

 

 

Stamp and Color on Cork to Make a Birthday Card

 

2021-sep-kyriakos-cork-birthday-card-700

By Kyriakos Pachadiroglou

– Use a piece of cork sheet as a base to stamp with StazOn inks and color with MEMENTO markers to create a Birthday greeting card. Add cork round shapes and a wooden heart to embellish the card.

 

Skill: Beginner

Time: 30 Minutes

 

Directions:

2021-sep-kyriakos-cork-birthday-card-step1

Step 1

Cut a 4x5in piece of the cork sheet. Stamp with the wood slice stamp and the StazOn Black Cherry to cover the surface.

 

2021-sep-kyriakos-cork-birthday-card-step2

Step 2

Color the heart in the center of the stamp design with the MEMENTO Love Letter marker.

 

2021-sep-kyriakos-cork-birthday-card-step3

Step 3

Use a palette knife to spread some structure paste and let it set.

 

2021-sep-kyriakos-cork-birthday-card-step4

Step 4

Cut thin slices of the wine cork and stamp them with the wood slice stamp and the StazOn Timber Brown ink pad.

 

2021-sep-kyriakos-cork-birthday-card-step5
Step 5

Color the lines of the stamped cork slices with the MEMENTO markers

 

2021-sep-kyriakos-cork-birthday-card-step6
Step 6

Stamp and color the wooden heart with the StazOn Black Cherry ink pad and the MEMENTO Love Letter marker.

 

2021-sep-kyriakos-cork-birthday-card-step7

Step 7

Stamp with the StazOn BlackCherry ink pad the happy birthday stamp and cut around.

 

2021-sep-kyriakos-cork-birthday-card-step_8

Step 8

Glue the colored cork slices on the card first to work as a base for the wooden heart.

 

2021-sep-kyriakos-cork-birthday-card-step9

Step 9

Continue by adding the rest of the embellishments.

 

Art Supplies:

Imagine

StazOn – Timber Brown, Black Cherry

MEMENTO Markers – Love letter,  Dandelion, Cottage Ivy, Pine

Palette Knife

 

Other

Card base

Cork sheet

Wine cork

Wooden heart shape

Structure paste

Crackerbox and Suzy stamps – wood slice

Happy birthday stamp

 

 

Learn How to Make a Fall Thank You Card

2021-Sept-Neva-FallThanks

By Neva Cole –

In today’s card making tutorial, I will show you how to create a Fall themed “Thanks” card using three different inks. The Autumn colors are vibrant and blend well with kraft card stock and burlap ribbon.  I hope this card inspires you to think of all things pumpkin spice and apple cider as we head into fall!

Skill:  Intermediate

Time:  1.5 hours

Directions:

2021-Sept-Neva-FallThanks-Step1ab2021-Sept-Neva-FallThanks-Step1c

Step 1

Spritz white cardstock with Fireworks! Lady Bug, Tangelo, and Dandelion.  I like to start with the darkest color first working to the lighter color to fill in the last areas of white.  Set aside to dry.

2021-Sept-Neva-FallThanks-Step2
Step 2

Use Memento Peanut Brittle and Rich Cocoa ink pads and press directly on the cardstock. This creates a splotchy look.

2021-Sept-Neva-FallThanks-Step3

Step 3

Die cut the Fireworks! colored cardstock with Skeleton Leaves dies.  Cut an outline to back the leaves either by hand or with an electronic die cutting machine.  Adhere the layers together with On Point Glue.  Small dots in the thicker areas of the leaves works best.

2021-Sept-Neva-FallThanks-Step4

Step 4

Die cut one “Thanks” sentiment from the Fireworks! colored cardstock and three from white cardstock.  Layer together with On Point Glue to create a dimensional sentiment.  To avoid glue from leaking out from between the layers, use small dots of glue on the outside edges.

2021-Sept-Neva-FallThanks-Step5

Step 5

Use a soft rubber brayer to ink cardstock trimmed to 4.74” x 5.75”.  Kaleidacolor in Autumn Leaves was used with the green portion in the middle and the light orange on either end of the cardstock.  Flip the cardstock to achieve this look.

2021-Sept-Neva-FallThanks-Step6

Step 6

Pressure emboss the cardstock with Basket Weave embossing folder.  Use a sanding block to remove color and allow the embossed design to pop.

2021-Sept-Neva-FallThanks-Step7

Step 7

Using Tear It! Tape, adhere your A7 kraft card base to background. Then tape the burlap ribbon. The Tear It! Tape, it’s translucent enough that it does not show through the burlap, and will hold the card together.  Adhere the “Thanks” sentiment and the leaves with On Point Glue.

Art Supplies

Imagine
Other
  • Sizzix Thinlets Skeleton Leaves
  • Spellbinders Phrase Set One
  • Darice Basket Weave embossing folder A7 size
  • Recollections A7 card Base
  • Burlap Ribbon
  • Sanding Block
  • Dimensional Foam Adhesive
  • Brother Scan-N-Cut

Make a Cheery Birthday Card Using Fireworks! Shimmery Sprays

2021-Aug-Neva-Fireworks!-Bday-card-step7

By Neva Cole –

In today’s card making tutorial, I will show you how to use your Fireworks! Shimmery Spray inks in different ways rather than just spraying them!  All of the blooming sunflowers during my travels were the inspiration for this late summer birthday card.  It is very cool that sunflower heads follow the sun throughout the day, and they are always bright and cheery!

Skill:  Intermediate

Time:  1.5 hours

Directions:

2021-Aug-Neva-Fireworks!-Bday-card-Step1

Step 1

Stamp sunflower image in Delicata Golden Glitz and heat emboss with Iridescent Embossing Powder.  The Delicata Golden Glitz is one of the brightest gold inks, and works best for a sunflower.  Die cut with an electronic die cut machine, or fussy cut with scissors.

2021-Aug-Neva-Fireworks!-Bday-card-Step2
Step 2

Use a brush tip Fantastix to color in the center of the sunflower with Delicata Black Shimmer.

2021-Aug-Neva-Fireworks!-Bday-card-Step3

Step 3

Shake the Fireworks! spray until all of the shimmer is mixed in.  When the spray sits for awhile, the shimmer settles to the bottom and can be seen as a thin layer through the bottle.  Remove the spray lid and tap a bit of Fireworks! on your work mat from the end of the plastic tube.  Use a fine tip paint brush to paint the sunflowers a beautiful iridescent Dandelion Yellow.  Yellow ink is one of the more difficult inks to use, and this method solves that dilemma!

2021-Aug-Neva-Fireworks!-Bday-card-Step4

Step 4

Stamp the leaf image in Brilliance Pearlescent Ivy and heat emboss with Iridescent Embossing Powder.  Using embossing powder helps maintain the original ink color of the image while painting over with Fireworks! spray.  It also allows you to color inside the lines much more easily! Use a fine point paint brush to add Fireworks! in Bamboo Leaves.  Die cut or fussy cut the leaves.

2021-Aug-Neva-Fireworks!-Bday-card-Step5

Step 5

To get a finer sprinkling of more carefully located drops of Fireworks!, use the same paint brush and gently tap over the card stock to create a fine splatter pattern.  When using the spray nozzle, the color is denser on the cardstock.  Finish the edges by inking with an ink blusher and Brilliance Pearlescent Ivy.

2021-Aug-Neva-Fireworks!-Bday-card-Step6

Step 6

Edge the base card with an ink blusher and Delicata Golden Glitz.  Using inks throughout the card allows for perfect coordination.

2021-Aug-Neva-Fireworks!-Bday-card-step7

Step 7

Position the leaves and sunflowers on the card front to determine the location for the sentiment.  Stamp the sentiment in Brilliance Pearlescent Ivy and heat emboss with Iridescent embossing powder.  Adhere the layers of the card together.  The card front and leaves are adhered with Tear-It! Tape, and the sunflowers are adhered with thin dimensional foam adhesive.

Art Supplies

Imagine
Other
  • Auntie Amy Sunflower image
  • Heartfelt Creations Bold Leaf stamp
  • Technique Tuesday Large Birthday sentiment stamp
  • Fine point paint brush

Make a Beautiful Pink Embossed Card

2021-aug-kyriakos-pink-wish-card-900-wm

By Kyriakos Pachadiroglou

– Stamp with Radiant Neon ink and partially cover with Mboss embossing powder to make a flourish background on a denim color paper. Add layers with the same design, stamped with VersaFine CLAIR inks on white card stock.

 

Skill: Beginner

Time: 1 Hour

 

Directions:

2021-aug-kyriakos-pink-wish-card-step1

Step 1

On a 4.5×6 inch piece of the denim color paper stamp the poppy pattern with the Radiant Neon ink. Ink the stamp well and press it firmly on the paper holding it for a few seconds on the paper pressed.

 

2021-aug-kyriakos-pink-wish-card-step2

Step 2

Sprinkle Mboss Metallic Berry embossing powder (don’t fully cover the pattern), remove the excess and heat set.

 

2021-aug-kyriakos-pink-wish-card-step3

Step 3

On a 3×4 ¼ inch piece of white card stock, stamp with the VersaFine CLAIR Purple delight positioning the design to the middle left on the paper. Stamp with VersaFine Charming Pink on a second piece of paper and cut along the poppy flower.

 

2021-aug-kyriakos-pink-wish-card-step4

Step 4

Stamp a wish sentiment with VersaFine Nocturne and tear the paper on all sides.

 

2021-aug-kyriakos-pink-wish-card-step5
Step 5

Set the stamped card stocks on a card base with Tear It! Tape and add a layer of it vertically on the left side to set the white satin ribbon. Repeat horizontally for the pink one.

 

2021-aug-kyriakos-pink-wish-card-step6
Step 6

Add foam tape to the back of the flower and set it on the card.

 

 

Art Supplies:

Imagine

VersaFine CLAIR – Charming Pink, Purple Delight, Nocturne

Radiant Neon – Electric Coral

Mboss – Metallic Berry

Tear It! Tape

 

Other

Card stock – white and denim color

Card base

Foam tape

Penny Black – Poppy pattern stamp

White and pink ribbons

Heat tool