Make a Quick Batch of Halloween Cards with a Few Fun Techniques

2021-Oct-Neva-PumpkinCard

By Neva Cole –

In today’s tutorial I will show you how to put together a quick set of Halloween cards ready to send out.  Ink resist and coloring with Fantastix and Kaleidacolor pads makes for quick images to place on a card.  The background is another Kaleidacolor brayered onto glossy cardstock.

Skill:  Intermediate

Time:  1.5 hours

Directions:

2021-Oct-Neva-PumpkinCard2

Step 1

Stamp pumpkin images in VersaFine Clair three times each on white cardstock. VersaFine Clair is a perfect ink for this technique as there is no smear when coloring over with other dye based inks.

2021-Oct-Neva-PumpkinCard3
Step 2

Stamp pumpkin carving in Radiant Neon Electric Yellow and heat emboss with Iridescent Embossing Powder.

2021-Oct-Neva-PumpkinCard4

Step 3

Fussy cut or die cut pumpkins.  Use a Fantastix brush tip to color pumpkins using ink from Kaleidacolor Desert Heat and Cappuccino Delight.  The spectrum of colors allows a quick selection to shade different areas of the pumpkins.  Use a paper towel or soft cloth and remove ink from the embossed area so the images pop.

2021-Oct-Neva-PumpkinCard5

Step 4

Stamp sentiment on glossy cardstock in Radiant Neon Electric Yellow and heat emboss with Iridescent Embossing Powder.

2021-Oct-Neva-PumpkinCard6

Step 5

Use a soft rubber brayer to ink cardstock with Kaleidacolor in Vineyard.  Remove ink from the embossed area with a paper towel or soft cloth.

2021-Oct-Neva-PumpkinCard7

Step 6

Die cut 4 bats from black cardstock. Use Radiant Neon Amplify! in white to add big white eyes. The Amplify! was not heated.

Step 6

Die cut four fence die cuts from black cardstock.  (Not shown.)

2021-Oct-Neva-PumpkinCard8

Step 8

Adhere background to A2 grey card base with Tear It! Tape. Adhere the fence and bat die cuts with On Point Glue.  Adhere center pumpkin with Tear It! Tape.  Adhere side pumpkins with dimensional foam adhesive.

Art Supplies

Imagine
Other
  • Joy Clair Trick or Treat Stamps
  • Heidi Grace Designs Halloween Stamps
  • Echo Park Going Batty Die
  • Heartfelt Creations Lattice Flourish Gateway Die
  • Rubber Brayer
  • Dimensional Foam Adhesive
  • Brother Scan-N-Cut

How to Create Fabric Halloween Treat Bags

Blog - Halloween Treat Bags copy

By Annie Collins

– Hello Crafty Friends – Annie here with some fun Halloween treat bags. I used a variety of Imagine Crafts products to create this cute fabric treat bags.

Directions:

Art Supplies:

Imagine

• Mboss Embossing Powder: Black Hologram

• Neon Radiant Amplify Texture

• Fireworks! Shimmery Craft Spray

• On Point Glue

Other:

• Dollar Tree Organza Bags: Golden
• Dollar Tree Googly Eyes: Purple
• Coco & Reno Dies: Witch
• Maker’s Movement Dies: Spider Set
• Studio Calico Mistable Stars
• Mini Maker Die Cutting Machine

Create Cute Christmas Cards with Puns

2021_Sep_JL_Punny Card_900

By Jessica Lin

Hi everyone, it’s Jessica here. Can you believe that it’s almost October? I felt like this year went by so fast! I thought I would start making Christmas cards earlier this year, and I wanted to create some “punny” cards. I remember when I first started cardmaking, I loved to make cards with puns or inside jokes because those were so different from store-bought cards. Do you like cards with puns? I would love to know!

Skill: Beginner

Directions:

Supplies Used

Imagine:
Other products:

Stamparatus
Stampin’ Up Foxy Friends bundle
Stampin’ Up Large Letters dies
White Cardstock
White Fun Foam
Stampin’ Up Garden Trellis Embossing Folder
Stampin’ Up Labeler Alphabet stamp set

How to Make a Simple Fall Tag

Leaf-Tag-Cover-600

By Alison Heikkila –

As we approach Autumn, I thought it would be fun to share a way to make a simple tag that can be used for gifts, as a place card, or even attached to a card base. By using a few simple techniques, you can make a bunch of these tags quickly, and save them for when you need them.

Skill Level: Beginner
Time: 15-20 Minutes

Directions:

Leaf-Tag-1

Step 1:

Die cut a tag out of Kraft cardstock. Cut a piece of Bristol Smooth Cardstock that is a little larger than your leaf stamp.

Step 2:

Stamp your leaf with VersaFine Clair Ink in Pinecone.

Step 3:

Apply Clear Mboss Embossing Powder to the leaf, shake off the excess, and heat set.

Leaf-Tag-2

Step 4:

Using Memento Inks in Pear Tart, Dandelion, Tangelo, and Morocco, apply using a blending brush. The colors should fade into each other and cover the entire leaf. The photo above shows the leaf not completely inked.

Step 5:

Die cut the leaf using the coordinating die, or fussy cut it.

Leaf-Tag-3

Step 6:

Place the leaf on the tag to help determine where you will add Tear It! Tape. The Tear It! Tape will be used to add stripes of embossing powder. I applied 2 strips.

Leaf-Tag-4

Step 7:

Sprinkle on Shimmering Night Sky Mboss powder on to the Tear It! Tape, shake off the excess, and heat set.

Leaf-Tag-5

Step 8:

Ink the edges of the tag with Rich Cocoa Memento ink and a blending brush. You could also do this step before you add the Tear It! Tape.

Leaf-Tag-6

Step 9:

Splatter on Sheer Shimmer Spritz in Gold all over the tag. Let dry

Leaf-Tag-7

Step 10:

Ink a small sentiment with VersaFine Clair Pinecone ink and stamp it on the tag.

Step 11:

Apply foam squares to the back of your leaf to raise it off of the surface of the tag and adhere it.

Step 12:

Add some ribbon or twine to the hole in the tag.

Leaf-Tag-8-600

I think this tag is so pretty and festive. You can easily use different colors of Memento inks or different embossing powder colors to completely change up the look.

Art Supplies:

Imagine:

• VersaFine Clair: Pinecone Ink
• Memento Ink: Pear Tart, Dandelion, Tangelo, Morocco, Rich Cocoa
• Tear It! Tape
• Sheer Shimmer Spritz in Gold
• Mboss Powder in Clear and Shimmering Night Sky

Other:

• Sizzix/Tim Holtz: Framelets Tag Die Set
• Kraft Cardstock
• Strathmore: Smooth Bristol Cardstock
• Stampendous: Jumbo Leaves
• Simon Says Stamp: Tiny Words
• May Arts: Organza Ribbon
• Blending Brushes
• Foam Squares

Stamp and Color on Cork to Make a Birthday Card

 

2021-sep-kyriakos-cork-birthday-card-700

By Kyriakos Pachadiroglou

– Use a piece of cork sheet as a base to stamp with StazOn inks and color with MEMENTO markers to create a Birthday greeting card. Add cork round shapes and a wooden heart to embellish the card.

 

Skill: Beginner

Time: 30 Minutes

 

Directions:

2021-sep-kyriakos-cork-birthday-card-step1

Step 1

Cut a 4x5in piece of the cork sheet. Stamp with the wood slice stamp and the StazOn Black Cherry to cover the surface.

 

2021-sep-kyriakos-cork-birthday-card-step2

Step 2

Color the heart in the center of the stamp design with the MEMENTO Love Letter marker.

 

2021-sep-kyriakos-cork-birthday-card-step3

Step 3

Use a palette knife to spread some structure paste and let it set.

 

2021-sep-kyriakos-cork-birthday-card-step4

Step 4

Cut thin slices of the wine cork and stamp them with the wood slice stamp and the StazOn Timber Brown ink pad.

 

2021-sep-kyriakos-cork-birthday-card-step5
Step 5

Color the lines of the stamped cork slices with the MEMENTO markers

 

2021-sep-kyriakos-cork-birthday-card-step6
Step 6

Stamp and color the wooden heart with the StazOn Black Cherry ink pad and the MEMENTO Love Letter marker.

 

2021-sep-kyriakos-cork-birthday-card-step7

Step 7

Stamp with the StazOn BlackCherry ink pad the happy birthday stamp and cut around.

 

2021-sep-kyriakos-cork-birthday-card-step_8

Step 8

Glue the colored cork slices on the card first to work as a base for the wooden heart.

 

2021-sep-kyriakos-cork-birthday-card-step9

Step 9

Continue by adding the rest of the embellishments.

 

Art Supplies:

Imagine

StazOn – Timber Brown, Black Cherry

MEMENTO Markers – Love letter,  Dandelion, Cottage Ivy, Pine

Palette Knife

 

Other

Card base

Cork sheet

Wine cork

Wooden heart shape

Structure paste

Crackerbox and Suzy stamps – wood slice

Happy birthday stamp

 

 

Learn How to Make a Fall Thank You Card

2021-Sept-Neva-FallThanks

By Neva Cole –

In today’s card making tutorial, I will show you how to create a Fall themed “Thanks” card using three different inks. The Autumn colors are vibrant and blend well with kraft card stock and burlap ribbon.  I hope this card inspires you to think of all things pumpkin spice and apple cider as we head into fall!

Skill:  Intermediate

Time:  1.5 hours

Directions:

2021-Sept-Neva-FallThanks-Step1ab2021-Sept-Neva-FallThanks-Step1c

Step 1

Spritz white cardstock with Fireworks! Lady Bug, Tangelo, and Dandelion.  I like to start with the darkest color first working to the lighter color to fill in the last areas of white.  Set aside to dry.

2021-Sept-Neva-FallThanks-Step2
Step 2

Use Memento Peanut Brittle and Rich Cocoa ink pads and press directly on the cardstock. This creates a splotchy look.

2021-Sept-Neva-FallThanks-Step3

Step 3

Die cut the Fireworks! colored cardstock with Skeleton Leaves dies.  Cut an outline to back the leaves either by hand or with an electronic die cutting machine.  Adhere the layers together with On Point Glue.  Small dots in the thicker areas of the leaves works best.

2021-Sept-Neva-FallThanks-Step4

Step 4

Die cut one “Thanks” sentiment from the Fireworks! colored cardstock and three from white cardstock.  Layer together with On Point Glue to create a dimensional sentiment.  To avoid glue from leaking out from between the layers, use small dots of glue on the outside edges.

2021-Sept-Neva-FallThanks-Step5

Step 5

Use a soft rubber brayer to ink cardstock trimmed to 4.74” x 5.75”.  Kaleidacolor in Autumn Leaves was used with the green portion in the middle and the light orange on either end of the cardstock.  Flip the cardstock to achieve this look.

2021-Sept-Neva-FallThanks-Step6

Step 6

Pressure emboss the cardstock with Basket Weave embossing folder.  Use a sanding block to remove color and allow the embossed design to pop.

2021-Sept-Neva-FallThanks-Step7

Step 7

Using Tear It! Tape, adhere your A7 kraft card base to background. Then tape the burlap ribbon. The Tear It! Tape, it’s translucent enough that it does not show through the burlap, and will hold the card together.  Adhere the “Thanks” sentiment and the leaves with On Point Glue.

Art Supplies

Imagine
Other
  • Sizzix Thinlets Skeleton Leaves
  • Spellbinders Phrase Set One
  • Darice Basket Weave embossing folder A7 size
  • Recollections A7 card Base
  • Burlap Ribbon
  • Sanding Block
  • Dimensional Foam Adhesive
  • Brother Scan-N-Cut