Learn How to Make a Textured Metallic Wedding Card

Posted on June 28, 2021 by Imagine

By Neva Cole

In today’s card making tutorial, I will show you how to make a Textured Metallic Wedding Card using VersaMark, Delicata, and Embossing Powder. This is a stunning card to make for a bride and groom as they celebrate their wedding day.

Skill: Intermediate

Time: 2 hours

Directions:

2021-Jun-Neva-Metallic-Wedding-Card-Step1

Step 1

This technique involves inking the FLAT side of an embossing folder for either 2-D or 3-D folder. This folder is 3-D with both indentations and slight protrusions. Ink the folder well using a brayer and VersaMark ink. Place white cardstock in folder and pressure emboss.

Step 2

Sprinkle liberally with Black Embossing Powder and heat the card from below with a heat embossing gun. Allow cardstock to cool.

2021-Jun-Neva-Metallic-Wedding-Card-Step3

Step 3

Lightly rub Delicata Golden Glitz over the surface of the cardstock. The high areas will pick up the ink. This creates a great three dimension look of black, white, and gold. Trim the finished panel to 4” x 5 ½”.

2021-Jun-Neva-Metallic-Wedding-Card-Step4

Step 4

Stamp “Mr.” & “Mrs.” in Delicata Golden Glitz and heat emboss with Iridescent Embossing Powder. Fussy cut the banners with scissors

2021-Jun-Neva-Metallic-Wedding-Card-Step5

Step 5

Die cut four “Congratulations” die cuts from white cardstock with Spellbinders Phrase Set One. Use an ink dauber to color the top die cut then heat emboss with Iridescent Embossing Powder. Use very small dots of On Point glue around the letters of the die cut to glue the layers together.

2021-Jun-Neva-Metallic-Wedding-Card-Step6

Step 6

Trim a strip of black cardstock to 7/8″ x 4″. Stamp with a background stars stamp in Delicata Silvery Shimmer and heat emboss with Silver Embossing Powder. Once cool add shine with Sheer Shimmer Stix in Sparkle.

2021-Jun-Neva-Metallic-Wedding-Card-Step7

Step 7

Trim cardstock to 4 1/2″ x 11″ and fold in half for a top fold card. Using and ink dauber add Delicata Golden Glitz ink around the outer 1/4″ of the card base.

2021-Jun-Neva-Metallic-Wedding-Card-Step8

Step 8

Stamp the sentiment inside the card with Delicata Black Shimmer and heat emboss with Iridescent Embossing Powder.

2021-Jun-Neva-Metallic-Wedding-Card-Step9

Step 9

Adhere card layers together with TearIt Tape, and adhere die cut with On Point Glue. The small little dot (tittle) of the letter “i” is replaced with a small gold adhesive rhinestone. The original tittle was too small to layer together.

Art Supplies

Imagine

• VersaMark

• Embossing Powder – Black, Iridescent, Silver

• Delicata – Golden Glitz, Silvery Shimmer, Black Shimmer

• Sheer Shimmer Stix -Sparkle

• On Point Glue

• Sponge Daubers

• Tear-It! Tape

Other

• Sizzix- 3-D Textured Impressions by Georgia Evans Star Fall

• Hampton Art-Bride and Groom Stamp Set

• Spellbinders-Phrase Set One-Congratulations

• Neato Stuff-Background cube stamp stars

• Brayer

• Scissors

• Gold adhesive rhinestone

Create a Fun Summer BBQ Invitation

Posted on June 22, 2021 by Imagine

Ladybug-Greens-1-600

By Alison Heikkila

Summer is fast approaching and that means it’s almost barbecue season! After many of us spent last year at home, isolated, I know a lot of folks are looking forward to spending summer with friends and family again. Today, I have a simple tutorial to help you make sweet invitations (or just regular greeting cards) using some of my favorite products from Imagine, like Kaleidacolor inks and Fireworks! Spray.

Skill Level: Beginner

Time: Approx. 20 Minutes, plus drying time

Directions:

Ladybug-Greens-5

Step 1

Stamp the ladybug from the Entomology stamp set 5 times on to Smooth Bristol cardstock with VersaMark Ink.

Ladybug-Greens-6

Step 2

Sprinkle Black Embossing Powder on to the ladybugs, shake off the excess, and heat set.

Ladybug-Greens-7

Step 3:

Using Lady Bug Fireworks! Shimmery Craft Spray and a brush, paint the ladybugs. Once the color is dry on the paper, you should wipe the embossed areas with a cloth, to remove any excess.

Ladybug-Greens-8

Step 4

Die cut the ladybugs with the coordinating die.

Ladybug-Greens-9

Step 5

Cut a piece of watercolor paper to 4″ x 5 1/4.”

Step 6

Swipe the Fresh Greens Kaleidacolor Inks across an acrylic block, and then spray with Ink Potion No. 9 a few times to get the colors to blend and move.

Step 7

Place the inked acrylic block in the center of the watercolor panel, put something heavy on top (I used a tape dispenser), and leave for a few minutes. The texture of the watercolor paper allows for imperfect color transfer, which I happen to love. If you prefer a smoother look, use paper with less tooth, or texture.

Ladybug-Greens-10

Step 8

Once you removed the acrylic block, stamp a subtle pattern around the edges with New Sprout ink. I used a crackle stamp from Stampendous.

Ladybug-Greens-11

Step 9

To add color to my white card base, I pressed my Fresh Greens Kaleidacolor inks into my Craft Mat, wet my brush, and applied the 3 center colors to the edges. I kept the colors soft and slightly blended. Using the same inks for the border as we did in the center of the card allows us to have perfectly matched elements, but since they’re applied differently, you create interest on your card.

Ladybug-Greens-2jpg

Step 10

Stamp a sentiment on the card with VersaFine Ink in Onyx Black. I combined a stamp from Erin Lee Creative with a stamp from Recollections to get the sentiment I wanted.

Step 11

Adhere your ladybugs to the card front, and your card front to the base when it’s dry.

Art Supplies

Imagine

VersaMark Ink
Black Embossing Powder
VersaFine Ink in Onyx Black
Fireworks! Spray in Lady Bug
Kaleidacolor Inks in Fresh Greens
Memento Ink in New Sprout
Ink Potion No. 9

Other

Stampers Anonymous/Tim Holtz: Entomology Stamp Set and Entomology Die Set
Erin Lee Creative: Winter Magic Stamp Set
Recollections: Sentiment set
Acrylic Blocks
Small paint brushes
Strathmore Smooth Bristol Cardstock
Canson Watercolor Paper
White A2 card base

Make a Star-Spangled Independence Day Card

Posted on June 18, 2021 by Imagine

2021-jun-kyriakos-celebrate-card-main-wm-900

By Kyriakos Pachadiroglou

Celebrate Independence Day with an easy to make Kraft paper card, using Walnut Inks and adding some shimmer with Delicata inks.

Skill: Beginner

Time: 30 Minutes

Directions:

2021-jun-kyriakos-celebrate-card-step1

Step 1

Damp the Jumbo Daubers with the Walnut Inks and press them to the edges of a 4×6 inch white card stock to create a thick line.

2021-jun-kyriakos-celebrate-card-step2

Step 2

Use a large Stipple Brush to add strike shimmering color from the Delicata ink pads, Sapphire Blue and Ruby Red on the above lines.

2021-jun-kyriakos-celebrate-card-step3

Step 3

Cut a star from a piece of Kraft card stock and stamp stars with the VersaColor White ink pad.

2021-jun-kyriakos-celebrate-card-step4

Step 4

Cut 5 inch long pieces of the gingham ribbons and add Tear It! Tape.

Step 5

Place the ribbons to form an X shape and stamp upon them with the VersaFine CLAIR Nocturne ink pad and the Sunshine stamp.

Step 6

Stamp the “CELEBRATE” sentiment with the VersaFine CLAIR Nocturne, cut around and place it on a bit larger Kraft color paper cutting.

2021-jun-kyriakos-celebrate-card-step7

Step 7

Set the sentiment with Tear It! Tape and then on a card base.

Art Supplies:

Imagine

Walnut Ink – Cherry Blossom, Cornflower

VersaColor – White

VersaFine CLAIR – Nocturne

Delicata – Sapphire Blue, Ruby Red

Stipple Brush

Jumbo Daubers

Tear It! Tape

Other

Card stock

Gingham ribbon – blue, red

Darkroom door stamp – Sunshine

Star stamp

Celebrate stamp

Make a Key Holder with Metal Dog Tags

Posted on June 7, 2021 by Imagine

2021-may-kyriakos-dog-tag-key-holder-main-wm-900

By Kyriakos Pachadiroglou

Use two SHEETmetal dog tags to easily make a key holder that is colored with StazOn inks. Attach metallic gears and charms on the tags using Goosebumps texture spray that works as a glazing medium too.

Skill: Beginner

Time: 30 Minutes plus drying time

Directions:

2021-may-kyriakos-dog-tag-key-holder-step1

Step 1

Place Tear It! Tape on one of the two SHEET Metal tags and glue together.

2021-may-kyriakos-dog-tag-key-holder-step2

Step 2

Remove the protective film and with the help of the sponge daubers color the surface using the StazOn Ultramarine, Timber brown and Black cherry ink pads.

2021-may-kyriakos-dog-tag-key-holder-step3

Step 3

Let it dry for a few seconds and secure the colors with a layer of GlazOn using an InkBlusher.

2021-may-kyriakos-dog-tag-key-holder-step4

Step 4

Deep a wooden stick in the bottle of the GooseBumps and place a thick layer of the medium on the tag. Place the charms and let it dry.

Step 5

Color further the metallic charms with the StazOn ink pads and again secure with the GlazOn.

Step 6

Add a chain or a key holder lobster and a ring.

Art Supplies:

Imagine

SHEET Metal – Dog Tags

StazOn – Ultramarine, Timber brown, Black cherry

GooseBumps Dauber Top Bottle – Original

Other

Metallic gears and charms

Ring and lobster lock for key holder

Learn How to Make a Quick Father’s Day Card

Posted on May 24, 2021 by Imagine

By Neva Cole

Today I will be demonstrating how to make a quick multi-layered card using three stamps and VersaColor and StazOn inks. This tone on tone card is a simple way to create a wonderful card for the Father in you life.

Skill: Beginner

Time: 30 Minutes

Directions:

2021-May-Neva-FathersDay-Card-1

Step 1

Stamp the sentiment in VersaMark Mountain Lake and heat emboss with Sparkle Embossing Powder. Then die cut the sentiment with Lawn Fawn Everyday Sentiment Banners.

Step 2

Use VersaColor Mountain Lake and stamp the “Tape Measure” and the “Love Beyond Measure” around the perimeter of an A-2 card base. Ink the edges of a 3 1/2″ x 4 5/8″. Stamp the Tape Measure in StazOn Ink in in Jet Black, die cut with matching die.

2021-May-Neva-FathersDay-Card-3

Step 3

Pressure emboss the 3 1/2″ x 4 5/8″ with Spellbinders Maze Embossing Folder. Lightly ink with Seafoam. Stamp the the Love Beyond Measure on card front.

2021-May-Neva-FathersDay-Card-4

Step 4

Assemble the card with dimensional foam adhesive and enjoy!

Art Supplies

Imagine

VersaMark: Mountain Lake, Seafoam

StazOn-Jet Black

Embossing Powder-Sparkle

Other

Hero Arts CL1498 Holiday Sentiments

Technique Tuesday What a Guy Stamp and Die

Lawn Fawn Everyday Sentient Banner

Spellbinders Maze Embossing Folder

Make an Elegant Happy Father’s Day Card

Posted on May 20, 2021 by Imagine

2021-may-kyriakos-happy-fathers-day-card-main-900

By Kyriakos Pachadiroglou

Match a few colors and an elegant sparkling background using the Mboss New Year’s Eve embossing powder to make a special card for Father’s day. Contrast among black and white with a touch of gold give a smart look on the card that can be made by anyone.

Skill: Beginner

Time: 45 Minutes

Directions:

2021-may-kyriakos-happy-fathers-day-card-step1

Step 1

Stamp in a repetitive pattern the diamond chain stamp on a 4x6in card stock using the VersaMark Watermark Ink pad. Cover with the Mboss New Year’s Eve embossing powder and heat set to create the background.

2021-may-kyriakos-happy-fathers-day-card-step2

Step 2

On a 4.5″ x 2″ piece of cardstock stamp the Happy Father’s Day sentiment on the lower part of it and on a small piece of cardstock the tie using the VersaMark Watermark Ink pad. Cover with gold Mboss Embossing Powder and heat set.

2021-may-kyriakos-happy-fathers-day-card-step3

Step 3

Color the inner part of the stamped tie with All-Purpose Ink Vegas Gold and cut around the design.

2021-may-kyriakos-happy-fathers-day-card-step4

Step 4

Cut a 2″ piece of the gingham ribbon and fold the two edges to the low middle of it to form a collar shape. Glue it on the long piece of the cardstock and add the stamped tie with some foam tape.

Step 5

Cut 4″ long pieces of the ribbons and set together with Tear It! Tape.

Step 6

Finally usually Tear It! Tape to set the ribbons on the background and continue adding the long cardstock piece.

Art Supplies:

Imagine

VersaMark Watermark Stamp Pad

Mboss Embossing Powder – Gold, New Year’s Eve

All-Purpose Ink – Vegas Gold

Tear It! Tape

Other

Grosgrain ribbon

Gingham ribbon

Crafty Secrets stamps – Favourite Fellas

Heat tool

Card stock

Hot glue

Foam tape

Directions:

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Art Supplies

Imagine

Other

Share this:

Step 1

Step 2

Step 3:

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Step 11

Imagine

Other

Share this:

By Kyriakos Pachadiroglou

Directions:

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Art Supplies:

Imagine

Other

Share this:

By Kyriakos Pachadiroglou

Directions:

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Art Supplies:

Imagine

Other

Share this:

Directions:

Step 1

Step 2

Step 3

Step 4

Art Supplies

Imagine

Other

Share this:

By Kyriakos Pachadiroglou

Directions:

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Art Supplies:

Imagine

Other

Share this: